Owners Manual
Table Of Contents
- Dell EMC PowerEdge R7525 Installation and Service Manual
- Contents
- About this document
- System overview
- Initial system setup and configuration
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Cable routing
- RIO card
- Optional front bezel
- System cover
- Drive backplane cover
- Control panel
- Air shroud
- Cooling fan
- Side wall brackets
- Drives
- Drive backplane
- Rear drive cage
- Front PERC module
- System memory
- Processor and heat sink
- Expansion cards and expansion card risers
- Expansion card installation guidelines
- Removing the expansion card risers
- Installing the expansion card risers
- Removing expansion card from the expansion card riser
- Installing an expansion card into the expansion card riser
- Removing the full length expansion card risers
- Installing the full length expansion card risers
- Removing a GPU
- Installing a GPU
- Optional serial COM port
- Optional IDSDM module
- MicroSD card
- M.2 SSD module
- BOSS S2 card (optional)
- System battery
- Optional internal USB card
- Intrusion switch module
- Optional OCP card
- Power supply unit
- Trusted Platform Module
- System board
- LOM card and rear I/O board
- Upgrade Kits
- Jumpers and connectors
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Table 23. Configuration 3-2: R1A + R2A + R3A + R4A (Half Length) (continued)
Card type Slot priority Maximum number of cards
Intel (OCP: 1 Gb) INT 1
FOXCONN (External adapter - Low
Profile)
2, 5, 7 2
FOXCONN (External adapter - Low
Profile)
3, 6 2
Dell BOSS S2 Adapter (Low Profile) Internal 1
Dell BOSS Adapter (Low Profile) 2, 5, 7 1
Dell BOSS Adapter (Low Profile) 3, 6 1
Samsung (PCIe SSD) 3, 6, 2, 5, 7 5
Intel (PCIe SSD) 3, 6, 2, 5, 7 5
Table 24. Configuration 3-2: R1A + R2A + R3A + R4A (Full Length)
Card type Supplier Category Card Priority Slot Priority
CRD,GRPHC,NVIDI
,T4,16GB,70W,V2
NVIDIA GPU 200 2, 5, 7
Table 25. Configuration 4: R1B + R2A + R3B + R4B (FL)
Card type Slot priority Maximum number of cards
Dell Serial 4, 8 1
Dell BOSS Adapter (Full Height) 4, 5, 1, 2, 7, 8 1
Dell BOSS Adapter (Low Profile) 3, 6 1
Dell PERC Adapter 3, 2 1
Mellanox (NIC: 100 Gb - Low Profile) 3, 6 2
Intel (NIC: 25 Gb - Full Height) 4, 5, 1, 2, 7 5
Intel (NIC: 25 Gb - Low Profile) 3, 6 2
Mellanox (NIC: 25 Gb - Low Profile) 3, 6 2
SolarFlare (NIC: 25 Gb - Full Height) 4, 5, 1, 2, 7 5
SolarFlare (NIC: 25 Gb - Low Profile) 3, 6 2
Broadcom (NIC: 25 Gb - Full Height) 4, 5, 1, 2, 7 5
Broadcom (NIC: 25 Gb - Low Profile) 3, 6 2
QLogic (NIC: 25 Gb - Full Height) 4, 5, 1, 2, 7 5
QLogic (NIC: 25 Gb - Low Profile) 3, 6 2
Emulex (HBA: FC32 - Full Height) 4, 5, 1, 2, 7 5
Emulex (HBA: FC32 - Low Profile) 3, 6 2
QLogic (HBA: FC32 - Full Height) 4, 5, 1, 2, 7 5
QLogic (HBA: FC32 - Low Profile) 3, 6 2
Emulex (HBA: FC16 - Full Height) 4, 5, 1, 2, 7 5
Emulex (HBA: FC16 - Low Profile) 3, 6 2
QLogic (HBA: FC16 - Full Height) 4, 5, 1, 2, 7 5
QLogic (HBA: FC16 - Low Profile) 3, 6 2
Installing and removing system components 97