Users Guide

14 Rack Installation Guide

Installing the Mounting Rails in the Rack

Installing RapidRails Mounting Rails

NOTE: Ensure that the rotating mounting brackets on the slide assemblies are

in the RapidRail configuration. See Figure 1-5.

At the front of the rack cabinet, position one of the mounting rails so that

its mounting-bracket flange fits between the marks or tape you placed

(or numbered locations) on the vertical rails in "Marking the Rack"

on page 10 (see Figure 1-5).

The top mounting hook on the front mounting-bracket flange should

enter the top hole between the marks you made on the vertical rails.

Figure 1-5. Installing RapidRails Mounting Rails

1 mounting hooks (4) 2 push buttons (2) 3 mounting rails (2)

front of rack