Dell™ PowerEdge™ R805 Systems Information Update 信息更新 Mise à jour des informations Aktuelle Informationen アップデート情報 정보 갱신본 Actualización de información
Dell™ PowerEdge™ R805 Systems Information Update
Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. ____________________ Information in this document is subject to change without notice. © 2008 Dell Inc. All rights reserved.
This document provides updated information for your system on the following topics: • • • • • • • • • • • • System memory update – quad-core processors Trusted Platform Module (TPM) update System power cable requirements System board replacement – safeguarding encrypted data LCD status messages update System messages update PCIe slot update System Setup program update Supported operating systems update Troubleshooting an SD card or USB memory key update SUSE® Linux Enterprise Server 9 (x86_64) update Hyper
System Board Replacement – Safeguarding Encrypted Data If your system is configured to support the TPM feature, you can use encryption applications to secure the contents of the hard drive(s). NOTE: When you use an encryption program, you are prompted to create a recovery key during system setup. Be sure to store this recovery key. If you replace the system board, you must supply the recovery key when you restart your system before you can access the encrypted files on your hard drive(s).
PCIe Slot Update Following are updates to information provided in the Hardware Owner’s Manual about the PCIe slots on the riser boards. • Figure 6-5 incorrectly specifies slot 2 as having a x8 lane width. Although the physical connector is x8, the actual PCI-e lane width of slot 2 is x4. • Figure 6-6 specifies slot 3 as having a x8 lane width. This is correct, however full x8 performance on this slot is application-dependent.
Supported Operating Systems Update If you install the Red Hat Enterprise Linux Server ES version 4.5 (x86-64) operating system on a system with quad-core processors, you must also apply the errata kernel 2.6.9550.12 update from Red Hat. See your Red Hat user documentation for instructions on using the Interactive Red Hat Update Agent to download and apply the kernel. Troubleshooting an SD Card or Internal USB Key The following troubleshooting procedure is an update to the Hardware Owner’s Manual.
8 Insert a different SD card or USB key that you know works properly. 9 Close the system. See "Opening and Closing the System" in the Hardware Owner’s Manual. 10 Reconnect the system to the electrical outlet, and turn on the system and attached peripherals. If the problem is not resolved, proceed to the next step. 11 Repeat step 2 and step 3. 12 Remove the expansion cards from the appropriate expansion-card riser— riser 1 for an SD card problem or riser 2 for a USB memory key problem.
SP4 Update SUSE Linux Enterprise Server SP4 fails to load on systems configured with quad-core processors and more than 4-GB of RAM. A future maintenance update from SUSE will correct this issue. Currently, you can bypass the issue by using one of the following methods: • In the System Setup program, enable the Node Interleaving option on the Memory Information screen. • In the operating system boot parameter file, set the memory parameter to a value less than 4-GB (for example, 3900m).
Dell™ PowerEdge™ R805 系统 信息更新
注、注意和警告 注:“注”表示可以帮助您更好地使用计算机的重要信息。 注意:“注意”表示可能会损坏硬件或导致数据丢失,并告诉您如何避免 此类问题。 警告:“警告”表示可能会导致财产损失、人身伤害甚至死亡。 ____________________ 本说明文件中的信息如有更改,恕不另行通知。 © 2008 Dell Inc. 版权所有,翻印必究。 未经 Dell Inc. 书面许可,严禁以任何形式进行复制。 本文中使用的商标:Dell、DELL 徽标和 PowerEdge 是 Dell Inc. 的商标; AMD 是 Advanced Micro Devices 的商标; Microsoft、Windows Server 和 Windows Vista 是 Microsoft Corporation 在 美国和其它国家 / 地区的注册商标或商标; Red Hat 和 Enterprise Linux 是 Red Hat, Inc. 在美国 和其它国家 / 地区的注册商标; SUSE 是 Novell, Inc.
本说明文件针对您的系统提供了有关以下主题的更新信息: • • • • • • • • • • • • 系统内存更新 - 四核处理器 受信任的平台模块 (TPM) 更新 系统电源电缆要求 系统板更换 – 保护加密数据 LCD 状态信息更新 系统信息更新 PCIe 插槽更新 系统设置程序更新 受支持的操作系统更新 故障排除 SD 卡或 USB 存储钥匙更新 SUSE® Linux Enterprise Server 9 (x86_64) 更新 Hyper-V 虚拟化更新 系统内存更新 - 四核处理器 在四核处理器系统中,只有系统包含八个或八个以下的内存模块时 (每个处理器不多于四个模块),系统才支持 667 MHz 的内存传输速度。 在总计具有八个以上内存模块的四核系统中,系统 BIOS 会将内存的传输 速度限制为 533 MHz。 请登录 support.dell.
系统板更换 - 保护加密数据 如果您的系统已配置为支持 TPM 功能,则您可以使用加密应用程序来保 护硬盘驱动器的内容。 注:使用加密程序时,在系统设置过程中会提示您创建一个恢复密钥。 请务必好好保存此恢复密钥。如果更换系统板,您必须在重新启动系统时提 供恢复密钥,才能访问硬盘驱动器上的加密文件。 LCD 状态信息更新 《硬件用户手册》的“LCD 状态信息”表中列出的以下 LCD 信息不适用 您的系统。 • E1A15 SAS Cable B(E1A15 SAS 电缆 B)— 您的系统不会使 用 SAS 电缆 B。 • E122F 2.5V PwrGd(E122F 2.5 伏 PwrGd)— 此信息适用于稳 压器,您的系统无此组件。 系统信息更新 以下是新的系统信息。 表 1-1.
表 1-1. 系统信息更新 (续) 信息 原因 更正措施 TPM configuration operation is pending. (TPM 配置操 作挂起。) Press (I) to Ignore or (M) to Modify to allow this change which may reset the system.
内存信息屏幕 Low-Power Mode(低能耗模式)选项已从 Memory Information (内存信息)屏幕中移除。 Integrated Devices(集成设备)屏幕 Microsoft® Windows Server® 2008 支持系统设置程序的 Integrated Devices (集成设备)屏幕中的 OS Watchdog Timer(操作系统监护程序计时器) 选项,但 Windows Server 2003 不支持。Windows Server 2003 不支持 OS Watchdog Timer(操作系统监护程序计时器)选项所需的高级配置和电源 接口 (ACPI) 3.
问题 • 系统无法从 SD 卡或 USB 钥匙读取数据。 措施 警告:只有经过培训的维修技术人员才能卸下系统护盖并拆装系统内部的 任何组件。开始执行该步骤之前,请查看系统附带的安全说明。 1 进入系统设置程序,并确保已启用 SD 卡或 USB 钥匙端口。 请参阅《硬件用户手册》中的“使用系统设置程序”。 2 关闭系统和连接的外围设备,并断开系统与电源插座的连接。 3 打开系统护盖。请参阅《硬件用户手册》中的“打开和合上系 统护盖”。 4 重置 SD 卡和 USB 钥匙。 5 合上系统护盖。请参阅《硬件用户手册》中的“打开和合上 系统护盖”。 6 将系统重新连接至电源插座,并打开系统和连接的外围设备。 如果问题仍未解决,请继续执行下一步。 7 重复步骤 2 和步骤 3。 8 插入您知道能正常工作的另一个 SD 卡或 USB 钥匙。 9 合上系统护盖。请参阅《硬件用户手册》中的“打开和合上 系统护盖”。 10 将系统重新连接至电源插座,并打开系统和连接的外围设备。 如果问题仍未解决,请继续执行下一步。 11 重复步骤 2 和步骤 3。 12 从相应的扩充卡提升板卸下扩充卡 - SD 卡存在问题请检查提升板
SUSE® Linux Enterprise Server 9 (x86_64) 更新 SP3 更新 SUSE Linux Enterprise Server SP3 不支持 SATA 光盘驱动器。如果尝试使 用 SATA 光盘驱动器安装操作系统,将显示以下错误消息: cannot read media (无法读取介质) device not mounted (未安装设备) 要解决此问题,请通过网络或使用外部 USB 光盘驱动器安装操作系统。 SP4 版本将支持从 SATA 光盘驱动器安装操作系统。 SP4 更新 在配置了四核处理器和超过 4 GB RAM 内存的系统上可能无法载入 SUSE Linux Enterprise Server SP4。SUSE 将来的维护更新将解决这一问题。 目前您可以使用以下方法之一绕过此问题: • 在系统设置程序中,启用 Memory Information(内存信息)屏幕上的 Node Interleaving(节点交叉存取)选项。 • 在操作系统引导参数文件中,将内存参数设置为小于 4 GB (如 3900 M)的值。 如果需要了解详细信息,请参阅操作系统说明
CR243tp2.
Remarques, avis et précautions REMARQUE : Une REMARQUE indique des informations importantes qui peuvent vous aider à mieux utiliser votre ordinateur. AVIS : Un AVIS vous avertit d'un risque de dommage matériel ou de perte de données et vous indique comment éviter le problème. PRÉCAUTION ! Une PRÉCAUTION indique un risque potentiel d'endommagement du matériel, de blessure corporelle ou de mort. ____________________ Les informations contenues dans ce document peuvent être modifiées sans préavis.
Ce document contient une mise à jour des informations portant sur les sujets suivants : • • • • • • • • • • • • Mise à jour concernant la mémoire système – processeurs quadruple cœur Mise à jour relative au module TPM (Trusted Platform Module) Câble d'alimentation nécessaire Remplacement de la carte système - Sauvegarde des données cryptées Mise à jour concernant les messages d'état de l'écran LCD Mise à jour concernant les messages du système Mise à jour concernant le logement PCIe Mise à jour concernant
Câble d'alimentation nécessaire Si vous avez acheté votre système sans câble d'alimentation, vous devez vous procurer un câble d'alimentation homologué dans votre pays qui répond aux critères de tension requis pour votre système et dont la puissance nominale est supérieure ou égale à 10 A . AVIS : N'utilisez pas un câble d'alimentation d'une puissance nominale inférieure à 10 A.
Mise à jour concernant les messages du système Les messages suivants sont nouveaux. Tableau 1-1. Mise à jour concernant les messages du système Message Causes Mesures correctives Invalid card found in the LOM mezzanine card slot Une carte système (LAN-on-motherboard, LOM) non prise en charge a été détectée dans logement de carte mezzanine LOM dédié. Replacez la carte non valide par une carte LOM prise en charge. TPM configuration operation is pending.
Mises à jour apportées au programme de configuration du système Écran CPU Information (Informations sur le processeur) Si vous utilisez le système d'exploitation Red Hat® Enterprise Linux® version 5 sur un système contenant un ou deux processeurs AMD® quadruple cœur, désactivez l'option Demand-Based Power Management (Gestion de l'alimentation en fonction de la demande). Un blocage peut survenir à l'arrêt du système si l'option est activée. Cet incident sera résolu dans une prochaine mise à jour de Red Hat.
Mise à jour relative aux systèmes d'exploitation pris en charge Si vous installez le système d'exploitation Red Hat Enterprise Linux Server ES version 4.5 (x86-64) sur un système doté de processeurs quadruple cœur, vous devez également appliquer la mise à jour 2.6.9550.12 du noyau. Consultez la documentation Red Hat pour des instructions sur l'utilisation de l'agent de mise à jour interactif Red Hat pour télécharger et appliquer le noyau.
4 Remboîtez la carte SD ou la clé USB. 5 Refermez le système. Voir “Opening and Closing the System” (Ouverture et fermeture du système) dans le document Hardware Owner's Manual (Manuel du propriétaire). 6 Rebranchez le système sur la prise secteur et allumez-le, ainsi que les périphériques connectés. Si l'incident persiste, passez à l'étape suivante. 7 Recommencez l'étape 2 et l'étape 3. 8 Insérez une autre carte SD ou clé USB fiable. 9 Refermez le système.
Mise à jour relative à SUSE® Linux Enterprise Server 9 (x86_64) Mise à jour relative au SP3 Les lecteurs optiques SATA ne sont pas pris en charge par SUSE Linux Enterprise Server service pack 3 (SP3).
Mise à jour relative à la virtualisation Hyper-V Beta L'installation de Microsoft Windows Vista® ou Windows Server 2008 en tant que système d'exploitation hôte sur une machine virtuelle créée avec le logiciel de virtualisation Hyper-V Beta provoque un blocage du système (écran bleu) si le système d'exploitation hôte est installé à partir du lecteur optique interne du système. Cette limitation ne s'applique à aucun autre système d'exploitation.
Dell™ PowerEdge™ R805-Systeme Aktuelle Informationen
Anmerkungen, Hinweise und Vorsichtshinweise ANMERKUNG: Eine ANMERKUNG macht auf wichtige Informationen aufmerksam, mit denen Sie das System besser einsetzen können. HINWEIS: Ein HINWEIS warnt vor möglichen Beschädigungen der Hardware oder vor Datenverlust und zeigt auf, wie derartige Probleme vermieden werden können. VORSICHT: Hiermit werden Sie auf eine potenziell gefährliche Situation hingewiesen, die zu Sachschäden, Verletzungen oder zum Tod führen könnte.
Dieses Dokument enthält aktuelle Informationen zum System.
CR243eb2.fm Page 30 Wednesday, April 2, 2008 2:06 PM Anforderungen an das Systemnetzkabel Wenn Sie Ihr System ohne Netzstromkabel erworben haben, müssen Sie ein für den Betrieb in Ihrem Land zugelassenes Netzstromkabel bereitstellen. Das Kabel muss die Spannungsanforderungen des Systems erfüllen oder übertreffen und für einen Nennstrom von mindestens 10A ausgelegt sein. HINWEIS: Verwenden Sie kein Netzstromkabel, das für einen Nennstrom von weniger als 10A ausgelegt ist.
Ergänzende Informationen zu Systemmeldungen Die folgenden Systemmeldungen sind neu. Tabelle 1-1. Ergänzende Informationen zu Systemmeldungen Meldung Ursachen Korrekturmaßnahmen Invalid card found in the LOM mezzanine card slot Im dedizierten LOMZusatzkartensteckplatz befindet sich eine nicht unterstützte LOM-Karte (LOM = LAN on Motherboard / auf der Systemplatine integriertes LAN-Modul). Ersetzen Sie die unbrauchbare Karte durch eine unterstützte LOM-Karte. TPM configuration operation is pending.
• Auf Abbildung 6-6 wird Steckplatz 3 mit x8-Bandbreite gezeigt. Dies ist zwar korrekt; jedoch ist die uneingeschränkte x8-Leistung in diesem Steckplatz nicht für alle Anwendungen gewährleistet. Setzen Sie Erweiterungskarten, die uneingeschränkte x8-Leistung benötigen, möglichst in Steckplatz 1 oder Steckplatz 4 ein.
Ergänzende Informationen zu den unterstützten Betriebssystemen Wenn Sie das Betriebssystem Red Hat Enterprise Linux Server ES Version 4.5 (x86-64) auf einem System mit Quad-Core-Prozessoren installieren, müssen Sie zusätzlich das Errata-Kernel-Update 2.6.9550.12 von Red Hat installieren. Hinweise zum Herunterladen und Installieren des Kernels mit dem Red Hat Update Agent (Aktualisierungs-Agent) finden Sie in der Red-HatBenutzerdokumentation.
5 Schließen Sie das System. Siehe „Öffnen des Systems“ im HardwareBenutzerhandbuch. 6 Verbinden Sie das System wieder mit dem Netzstrom, und schalten Sie das System und die angeschlossenen Peripheriegeräte ein. Wenn sich das Problem auf diese Weise nicht lösen lässt, fahren Sie mit dem nächsten Schritt fort. 7 Wiederholen Sie Schritt 2 und Schritt 3. 8 Setzen Sie eine andere funktionierende SD-Karte bzw. einen anderen USB-Stick ein. 9 Schließen Sie das System.
Ergänzende Informationen zu SUSE® Linux Enterprise Server 9 (x86_64) Ergänzende Informationen zu SP3 Optische SATA-Laufwerke werden von SUSE Linux Enterprise Server 3 Service Pack (SP3) nicht unterstützt).
Ergänzende Informationen zur Hyper-V-BetaVirtualisierung Wenn Microsoft Windows Vista® oder Windows Server 2008 als GastBetriebssystem auf einem mit der Virtualisierungssoftware Hyper-V Beta erstellten virtuellen Rechner installiert wird, kommt es zu einem Systemabsturz (Blue Screen), sofern die Installation des Gast-Betriebssystems vom internen optischen Laufwerk des Systems aus erfolgt. Andere Betriebssysteme sind von dieser Einschränkung nicht betroffen.
Dell™ PowerEdge™ R805 システム アップデート情報
CR243tp2.fm Page 2 Wednesday, April 2, 2008 2:13 PM メモ、注意、警告 メモ: コンピュータを使いやすくするための重要な情報を説明し ています。 注意: ハードウェアの損傷やデータの損失の可能性を示し、 その危険を回避するための方法を説明しています。 警告: 物的損害、けが、または死亡の原因となる可能性が あることを示します。 ____________________ 本書の内容は予告なく変更されることがあります。 © 2008 すべての著作権は Dell Inc. にあります。 Dell Inc. の書面による許可のない複製は、いかなる形態においても厳重に禁じられています。 本書に使用されている商標:Dell、DELL ロゴ、および PowerEdge は Dell Inc.
本書では、以下のトピックについて、お使いのシステムに関するアップ デート情報を提供します。 • • • • • • • • • • • • システムメモリに関するアップデート情報 – クアッドコアプロセ ッサ 信頼済みプラットフォームモジュール(TPM)に関するアップデー ト情報 システムの電源ケーブルの要件 システム基板の交換 – 暗号化されたデータの保護 LCD ステータスメッセージに関するアップデート情報 システムメッセージに関するアップデート情報 PCIe スロットに関するアップデート情報 セットアップユーティリティに関するアップデート情報 サポートされている OS に関するアップデート情報 SD カードまたは USB メモリキーのトラブルシューティングに関す るアップデート情報 SUSE® Linux Enterprise Server 9(x86_64)に関するアップデー ト情報 Hyper-V 仮想化ソフトウェアに関するアップデート情報 システムメモリに関するアップデート情報 – クアッドコアプロセッサ クアッドコアプロセッサを搭載したシステムでは、搭載されているメモリ モジュールが 8 枚
信頼済みプラットフォームモジュール (TPM)に関するアップデート情報 中国に出荷されるシステムには TPM が装備されていません。『ハードウェ アオーナーズマニュアル』の「セットアップユーティリティの使い方」の 章に一覧表示されている TPM オプションはすべて無視してください。 システムの電源ケーブルの要件 システムの購入時に電源ケーブルを注文されなかった場合は、使用される 国内での使用が認められた電源ケーブルをご用意いただく必要があり ます。ケーブルは、お使いのシステムの電圧要件を満たすか、または上 回っており、定格電流が 10A 以上である必要があります。 注意:定格電流が 10A に満たない電源ケーブルは使用しないでください。 システム基板の交換 – 暗号化されたデータの 保護 お使いのシステムで TPM 機能がサポートされている場合は、暗号化プロ グラムを使用してハードドライブの内容を保護することができます。 メモ:暗号化プログラムを使用する場合は、システムのセットアップ中 にリカバリキーの作成を求められます。このリカバリキーは必ず保管して おいてください。システム基板を交換した場合は、システ
システムメッセージに関するアップデー ト情報 以下のシステムメッセージが新しく追加されています。 表 1-1 システムメッセージに関するアップデート情報 メッセージ 原因 対応処置 Invalid card found in the LOM mezzanine card slot 専用 LOM メザニンカー ドスロット内にサポート されていない LOM(LANon-Motherboard)カード が検出されました。 無効なカードをサポー トされている LOM カードと交換します。 TPM configuration operation is pending.Press (I) to Ignore or (M) to Modify to allow this change which may reset the system.
セットアップユーティリティに関するアップ デート情報 CPU Information(CPU 情報)画面 クアッドコア AMD® プロセッサが 1 つまたは 2 つ搭載されたシステムで Red Hat® Enterprise Linux® バージョン 5 を実行する場合は、DemandBased Power Management(デマンドベースの電力管理)オプション を無効にします。このオプションを有効にしていると、シャットダウン中 にシステムがハングする場合があります。この問題は、Red Hat からの将 来のアップデートリリースでは解決される予定です。 Memory Information(メモリ情報)画面 Memory Information(メモリ情報)画面から Low-Power Mode (低電力モード)オプションが削除されました。 Integrated Devices(内蔵デバイス)画面 Microsoft® Windows Server® 2008 は、セットアップユーティリティの Integrated Devices(内蔵デバイス)画面で OS Watchdog Timer (ウォッチド
サポートされている OS に関するアップデー ト情報 クアッドコアプロセッサを搭載しているシステムに Red Hat Enterprise Linux Server ES バージョン 4.5(x86-64)をインストールする場合は、 Red Hat から提供されている Errata カーネル 2.6.9550.
5 システムカバーを閉じます。『ハードウェアオーナーズマニュアル』 の「システムカバーの開閉」を参照してください。 6 電源ケーブルをコンセントに差し込んで、システムと周辺機器の電 源を入れます。 問題が解決しない場合は、次の手順に進みます。 7 手順 2 および 手順 3 を繰り返します。 8 動作確認済みの別の SD カードまたは USB キーを挿入します。 9 システムカバーを閉じます。『ハードウェアオーナーズマニュアル』 の「システムカバーの開閉」を参照してください。 10 電源ケーブルをコンセントに差し込んで、システムと周辺機器の電 源を入れます。 問題が解決しない場合は、次の手順に進みます。 11 手順 2 および 手順 3 を繰り返します。 12 該当する拡張カードライザーから拡張カードを取り外します (SD カードに問題がある場合はライザー 1、USB メモリキーに問題 がある場合はライザー 2)。『ハードウェアオーナーズマニュアル』 の「拡張カードの取り外し」を参照してください。 13 拡張カードライザーをソケットに装着しなおします。『ハードウェア オーナーズマニュアル』の「拡張カードラ
SUSE® Linux Enterprise Server 9(x86_64) に関するアップデート情報 SP3 に関するアップデート情報 SUSE Linux Enterprise Server SP3 は SATA オプティカルディスクドライ ブをサポートしていません。SATA オプティカルディスクドライブを使用 して OS のインストールを試みると、次のエラーメッセージが表示される 場合があります。 cannot read media(メディアを読み込めません) device not mounted(デバイスがマウントされていません) この問題を解決するには、ネットワークまたは外付け USB オプティカル ドライブから OS をインストールしてください。SP4 は SATA オプティカ ルドライブ対応となります。 SP4 に関するアップデート情報 クアッドコアプロセッサと 4 GB を超える RAM を搭載しているシステム では、SUSE Linux Enterprise Server SP4 を読み込むことができません。 この問題は、SUSE から今後提供されるメンテナンスアップデートによっ て解
Hyper-V ベータ仮想化ソフトウェアに関する アップデート情報 Hyper-V ベータ仮想化ソフトウェアを使用して作成した仮想コンピュータ に Microsoft Windows Vista® または Windows Server 2008 をゲスト OS としてインストールする場合、ゲスト OS をシステムの内蔵オプティカル ドライブからインストールすると、システムがクラッシュします(ブルー スクリーン)。これら以外の OS にはこの制約はありません。エラーを修 正するチップセットドライバのアップデートが support.dell.
Dell™ PowerEdge™ R805 시스템 정보 갱신본
주, 주의사항 및 주의 주: "주"는 컴퓨터를 보다 효율적으로 사용하는데 도움이 되는 중요 정보를 제 공합니다. 주의사항: "주의사항"은 하드웨어의 손상 또는 데이터 유실 위험을 설명하며, 이러한 문제를 방지할 수 있는 방법을 알려줍니다. 주의: "주의"는 재산상의 피해나 심각한 부상 또는 사망을 유발할 수 있는 위 험이 있음을 나타냅니다. ____________________ 이 문서의 정보는 사전 통보 없이 변경될 수 있습니다. © 2008 Dell Inc. 저작권 본사 소유. Dell Inc. 의 서면 승인 없이 어떠한 경우에도 무단 복제하는 것을 엄격히 금합니다 . 본 설명서에 사용된 상표인 Dell, DELL 로고 및 PowerEdge 는 Dell Inc. 의 상표이며 , AMD 는 Advanced Micro Devices 의 상표입니다 .
본 설명서는 다음 내용에 관한 시스템의 최신 정보에 대해 설명합니다. • • • • • • • • • • • • 시스템 메모리 업데이트 – 쿼드 코어 프로세서 TPM (Trusted Platform Module) 업데이트 시스템 전원 케이블 요구사항 시스템 보드 교체 – 암호화된 데이터 보호 LCD 상태 메시지 업데이트 시스템 메시지 업데이트 PCIe 슬롯 업데이트 System Setup 프로그램 업데이트 지원되는 운영 체제 업데이트 SD 카드 또는 USB 메모리 키 업데이트 문제 해결 SUSE® Linux Enterprise Server 9 (x86_64) 업데이트 Hyper-V 가상화 업데이트 시스템 메모리 업데이트 – 쿼드 코어 프로세서 쿼드 코어 프로세서가 장착된 시스템에서 667-MHz 메모리 전송 속도는 시 스템에 메모리 모듈이 8개(프로세서당 최대 4개의 모듈) 이하일 경우에만 지원됩니다.
시스템 보드 교체 – 암호화된 데이터 보호 시스템이 TPM 기능을 지원하도록 구성되어 있을 경우 암호화 응용프로그 램을 사용하여 하드 드라이브의 내용을 보호할 수 있습니다. 주 : 암호화 응용프로그램을 사용할 경우 시스템 설정 도중 복구 키를 작성하 라는 메시지가 표시됩니다 . 이 복구 키는 반드시 저장하십시오 . 시스템 보드 를 교체할 경우 하드 드라이브의 암호화된 파일을 액세스하기 전에 시스템을 다시 시작할 때 복구 키를 입력해야 합니다 . LCD 상태 메시지 업데이트 하드웨어 소유자 설명서의 "LCD 상태 메시지" 표에 목록으로 표시된 다음 LCD 메시지는 현재 시스템에 적용되지 않습니다. • E1A15 SAS 케이블 B — A SAS 케이블 B는 시스템에서 사용되지 않습니다. • E122F 2.5V PwrGd — 이 메시지는 시스템에 없는 전압 조정기에 적 용됩니다. 시스템 메시지 업데이트 다음 시스템 메시지는 새 메시지입니다. 표 1-1.
PCIe 슬롯 업데이트 다음은 하드웨어 소유자 설명서에 제공된 라이저 보드의 PCIe 슬롯에 대 한 최신 정보입니다. • 그림 6-5는 슬롯 2가 x8 레인 폭이 있는 것으로 잘못 지정합니다. 물리적 커넥터가 x8이어도 슬롯 2의 실제 PCI-e 레인 폭 너비는 x4입니다. • 그림 6-6은 슬롯 3이 x8 레인 폭이 있는 것으로 지정합니다. 이것은 정확 하지만 이 슬롯의 전체 x8 성능은 응용프로그램마다 다릅니다. 필요한 전체 x8 성능을 보장하려면 x8 작업이 필요한 추가 카드에 슬롯 1 또는 슬롯 4를 사용하십시오. System Setup 프로그램 업데이트 CPU 정보 화면 하나 또는 두 개의 쿼드 코어 AMD® 프로세서가 내장된 시스템에서 Red Hat® Enterprise Linux® version 5 운영 체제를 실행하는 경우 요구 기반 전원 관리 옵션을 비활성화하십시오. 이 옵션이 활성화되어 있을 경우 종료하는 도중 시스템이 멈출 수 있습니다.
지원되는 운영 체제 업데이트 쿼드 코어 프로세서가 장착된 시스템에 Hat Enterprise Linux Server ES version 4.5 (x86-64) 운영 체제를 설치할 경우 Red Hat의 정오표 커널 2.6.9550.12 업데이트도 설치해야 합니다. Interactive Red Hat Update Agent를 사용하여 커널을 다운로드 및 설치하는 방법에 대한 지침은 Red Hat 사용 설명서를 참조하십시오. SD 카드 또는 내장형 USB 키 문제 해결 다음 문제 해결 과정은 하드웨어 소유자 설명서의 업데이트입니다. 시스 템 내부의 SD 카드와 USB 키 포트 및 이러한 종류의 메모리 장치 설치 또 는 제거에 대한 내용은 하드웨어 소유자 설명서를 참조하십시오. 문제 • SD 카드 또는 USB 키에서 데이터를 읽을 수 없습니다. 조치 주의: 숙련된 서비스 기술자만 시스템 덮개를 분리하고 시스템 내부의 구성 부품에 액세스해야 합니다.
9 시스템을 닫습니다. 하드웨어 소유자 설명서의 "시스템 열기 및 닫기"를 참조하십시오. 10 시스템을 전원 콘센트에 다시 연결하고 시스템 및 장착된 주변 장치의 전원을 켭니다. 문제가 해결되지 않으면 다음 단계를 계속 수행합니다 . 11 2단계~3단계를 반복합니다. 12 해당 확장 카드 라이저에서 확장 카드를 분리하십시오(SD 카드 문제일 경우 라이저 1 또는 USB 메모리 키 문제일 경우 라이저 2). 하드웨어 소 유자 설명서의 "확장 카드 분리"를 참조하십시오. 13 소켓에 확장 카드 라이저를 다시 장착합니다. 하드웨어 소유자 설명서 의 "확장 카드 라이저"를 참조하십시오. 14 12단계에서 분리한 확장 카드를 재설치하십시오. 15 시스템을 닫습니다. 하드웨어 소유자 설명서의 "시스템 열기 및 닫기"를 참조하십시오. 16 시스템을 전원 콘센트에 다시 연결하고 시스템 및 장착된 주변 장치의 전원을 켭니다. 문제가 지속될 경우 하드웨어 소유자 설명서의 " 도움말 얻기 " 를 참조 하십시오 .
SP4 업데이트 SUSE Linux Enterprise Server SP4가 4 GB 이상의 RAM과 쿼드 코어 프로세 서로 구성된 시스템에서 불러오는 데 실패했습니다. SUSE에서 추후 계속 관리하면 이 문제가 해결될 것입니다. 현재 다음 방법 중 하나를 사용하여 문제를 건너뛸 수 있습니다. • System Setup 프로그램에서 Memory Information(메모리 정보) 화면의 Node Interleaving(노드 인터리빙) 옵션을 활성화하십시오. • 운영 체제 부팅 매개변수 파일에서 메모리 매개변수를 4 GB 미만 (예: 3900m)으로 설정하십시오. 보다 자세한 내용은 운영 체제 설명서를 참조하십시오.
Sistemas Dell™ PowerEdge™ R805 Actualización de información
Notas, avisos y precauciones NOTA: Una NOTA proporciona información importante que le ayudará a utilizar mejor el ordenador. AVISO: Un AVISO indica la posibilidad de daños en el hardware o la pérdida de datos, e informa de cómo evitar el problema. PRECAUCIÓN: Un mensaje de PRECAUCIÓN indica el riesgo de daños materiales, lesiones o incluso la muerte. ____________________ La información contenida en este documento puede modificarse sin previo aviso. © 2008 Dell Inc. Todos los derechos reservados.
En este documento se proporciona información actualizada sobre los temas siguientes relativos al sistema: • • • • • • • • • • • • Actualización de la memoria del sistema: Procesadores de cuatro núcleos Actualización del módulo de plataforma segura (TPM) Requisitos del cable de alimentación del sistema Sustitución de la placa base: Protección de los datos cifrados Actualización de los mensajes de estado de la pantalla LCD Actualización de los mensajes del sistema Actualización de la ranura PCIe Actualizació
Requisitos del cable de alimentación del sistema Si ha adquirido el sistema sin cable de alimentación, deberá obtener uno que esté aprobado para el uso en su país, que cumpla o supere los requisitos de voltaje de su sistema y que tenga una capacidad de 10 A o superior. AVISO: No utilice un cable de alimentación con una corriente nominal de menos de 10 A.
Actualización de los mensajes del sistema Los mensajes del sistema siguientes son nuevos. Tabla 1-1. Actualización de los mensajes del sistema Mensaje Causas Acciones correctivas Invalid card found in the LOM mezzanine card slot Se ha detectado una tarjeta LOM (LAN en placa madre) no compatible en la ranura para tarjeta intermedia LOM dedicada. Sustituya la tarjeta no válida por una tarjeta LOM compatible. TPM configuration operation is pending.
Actualizaciones del programa de configuración del sistema Pantalla de información de la CPU Si utiliza la versión 5 del sistema operativo Red Hat® Enterprise Linux® en un sistema que contiene uno o dos procesadores AMD® de cuatro núcleos, debe desactivar la opción Demand-Based Power Management (Administración de energía basada en la demanda). El sistema se puede bloquear durante el apagado si esta opción está activada. Este problema quedará solucionado en una futura versión de actualización de Red Hat.
Actualización de los sistemas operativos admitidos Si instala el sistema operativo Red Hat Enterprise Linux Server ES versión 4.5 (x86-64) en un sistema con procesadores de cuatro núcleos, también deberá aplicar la actualización 2.6.9550.12 del parche del kernel de Red Hat. Consulte la documentación del usuario de Red Hat para obtener instrucciones sobre cómo utilizar Interactive Red Hat Update Agent (Agente interactivo de actualización de Red Hat) para descargar y aplicar el kernel.
4 Vuelva a colocar la tarjeta SD o la memoria USB. 5 Cierre el sistema. Consulte “Apertura y cierre del sistema” en el Manual del propietario del hardware. 6 Vuelva a conectar el sistema a la toma eléctrica y enciéndalo junto con los periféricos que tenga conectados. Si el problema no se resuelve, continúe con el paso siguiente. 7 Repita el paso 2 y el paso 3. 8 Inserte una tarjeta SD o una memoria USB que funcione correctamente. 9 Cierre el sistema.
Actualización de SUSE® Linux Enterprise Server 9 (x86_64) Actualización SP3 SUSE Linux Enterprise Server Service Pack 3 (SP3) no admite unidades de disco óptico SATA. Al intentar instalar el sistema operativo desde una unidad de disco óptico SATA, pueden aparecer los mensajes de error siguientes: cannot read media (no se puede leer el medio) device not mounted (dispositivo no montado) Para resolver este problema, instale el sistema operativo desde la red o desde una unidad óptica USB externa.
Actualización de la virtualización Hyper-V Beta La instalación de Microsoft Windows Vista® o Windows Server 2008 como sistema operativo invitado en una máquina virtual creada con el software de virtualización Hyper-V Beta provoca el bloqueo del sistema (pantalla azul) si el sistema operativo invitado se instala desde la unidad óptica interna del sistema. Ningún otro sistema operativo se ve afectado por esta limitación.