Setup Guide

Statement of Volatility – Dell PowerEdge R830
Dell PowerEdge R830 contains both volatile and non-volatile (NV) components. Volatile components lose
their data immediately upon removal of power from the component. Non-volatile components continue to
retain their data even after the power has been removed from the component. Components chosen as user-
definable configuration options (those not soldered to the motherboard) are not included in the Statement of
Volatility. Configuration option information (pertinent to options such as microprocessors, remote access
controllers, and storage controllers) is available by component separately. The following NV components are
present in the PowerEdge R830 server.
Item
Non-Volatile
or Volatile
Quantity
Reference Designator
Size
Planer
PCH Internal CMOS
RAM
Volatile
1
U_104
256 Bytes
BIOS SPI Flash Non-Volatile 1
U_9
16 MB
iDRAC SPI Flash Non-Volatile 1
U_125
4 MB
BMC EMMC Non-Volatile 1
U_114
4 GB
BMC Memory Volatile 1
U_112
2 Gb
CPU Vcore and
Memory regulator
Non-Volatile
6
(Planar) U148, U157, U152,
U164,
System CPLD
Non-Volatile
1
U_191
2210 logic elements
1700 marcocells
272 IOs
System Memory
Volatile
Up to 12
per CPU
CPU1: DIMMA1~DIMMA12,
CPU2: DIMMB1~DIMMB12,
Up to 32GB per DIMM
(Up to 64GB per DIMM
on post RTS)
PEM board
FRU EEPROM Non-Volatile 1 U45 EEPROM: 512B
CPU Vcore and
Memory regulator
Non-Volatile 1 (PEM) U11, U23, U18, U30
System Memory
Volatile
Up to 12
per CPU
CPU3:
DIMMC1~DIMMC12,
CPU4:
DIMMD1~DIMMD12,
Up to 32GB per DIMM
(Up to 64GB per DIMM
on post RTS)
06 - 2016