Owner's Manual

Installing A Memory-Riser Blank
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1. Align the memory-riser blank with the guides on the memory riser cage.
2. Insert the memory-riser blank firmly into the guide until it is fully seated.
3. Close the system.
4. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
Removing A Memory Riser
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2. Open the system.
3. Locate the memory riser in the memory cage.
4. For smooth releasing of handle, press the handle lock and then slide.
5. To release the memory riser handle, slide the handle lock on the memory riser, in the direction of arrow.
The memory riser handle pops out in the upward direction.
6. Hold the handle and pull the memory riser out of the chassis.
CAUTION: To maintain proper system cooling, all empty memory-riser slots must have memory-riser blanks
installed.
7. If applicable, install a memory-riser blank.
8. Close the system.
9. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
47