Dell PowerEdge R920 Guía de introducción Modelo reglamentario: E23S Series Tipo reglamentario: E23S001
Notas, precauciones y avisos NOTA: Una NOTA proporciona información importante que le ayuda a utilizar mejor su equipo. PRECAUCIÓN: Una PRECAUCIÓN indica la posibilidad de daños en el hardware o la pérdida de datos, y le explica cómo evitar el problema. AVISO: Un mensaje de AVISO indica el riesgo de daños materiales, lesiones corporales o incluso la muerte. Copyright © 2014 Dell Inc. Todos los derechos reservados.
Instalación y configuración AVISO: Antes de realizar el procedimiento siguiente, revise las instrucciones de seguridad incluidas con el sistema. Desembalaje de un sistema rack Desembale el sistema e identifique cada elemento. Ensamble los rieles e instale el sistema en el bastidor siguiendo las instrucciones de seguridad y de instalación del bastidor incluidas con el sistema. Ilustración 1.
Conexión de los cables de alimentación Ilustración 3. Conexión de los cables de alimentación Conecte los cables de alimentación al sistema y, si se utiliza un monitor, conecte el cable de alimentación correspondiente al monitor. Fijación de los cables de alimentación Ilustración 4. Fijación de los cables de alimentación Doble los cables de alimentación del sistema y conéctelos a la manija del suministro de energía mediante la correa para cables.
Cómo encender el sistema Ilustración 5. Cómo encender el sistema Presione el botón de alimentación del sistema. El indicador de encendido debería iluminarse. Instalación del bisel opcional Ilustración 6. Instalación del bisel opcional Instale el bisel (opcional). Complete la instalación del sistema operativo Si ha adquirido un sistema operativo preinstalado, consulte la documentación relacionada con el sistema operativo.
Contrato de licencia de software Dell Antes de utilizar el sistema, lea el Contrato de licencia de software Dell que se incluye. Debe considerar cualquier soporte de software instalado por Dell como una copia de SEGURIDAD del software instalado en el disco duro de su sistema. Si no acepta las condiciones del contrato, llame al número de teléfono de asistencia al cliente. Los clientes de los Estados Unidos pueden llamar al 800-WWW-DELL (800-999-3355).
Frecuencia: 50 Hz/60 Hz (unidad de suministro de energía de CA) Consumo eléctrico: 12 A – 6,5 A (X 4) (con unidad de suministro de energía de CA de 1100 W) 10 A – 5 A (X 4) (con unidad de suministro de energía de CA de 750 W) 5 A (X 4) (con unidad de suministro de energía de CA redundante Titanium de 750 W) 32 A (X 4) (con unidad de suministro de energía de CC de 1100 W) Especificaciones técnicas NOTA: Las especificaciones siguientes son únicamente las que deben incluirse por ley con el envío del equipo
Características físicas Altura 172,6 mm (6,80 pulgadas) Anchura Con pestillos de bastidor 482,4 mm (18,98 pulgadas) Sin pestillos de bastidor 422 mm (16,61 pulgadas) Profundidad (incluye embellecedor) 802,3 mm (31,59 pulgadas) Peso (máximo) 59 kg (130,07 lb) Peso (vacío) 23,8 kg (52,47 lb) Entorno NOTA: El sistema admite operaciones de salida de 40 °C y 45 °C para centros de datos refrigerados por aire fresco.
Entorno Storage (Almacenamiento) Seis impulsos ejecutados consecutivamente en los ejes x, y y z positivo y negativo (un impulso en cada lado del sistema) de 71 G durante un máximo de 2 ms Altitud máxima En funcionamiento 3048 m (10 000 pies). Storage (Almacenamiento) 12 000 m (39 370 pies). Reducción de la altitud en funcionamiento Hasta 35 °C (95 °F) Se reduce la temperatura máxima 1 °C/300 m (1 °F/547 pies) por encima de los 950 m (3117 pies).