Dell Lifecycle Controller Remote-Dienste v2.70.70.70 Schnellstart-Handbuch September 2019 Rev.
Anmerkungen, Vorsichtshinweise und Warnungen ANMERKUNG: Eine ANMERKUNG macht auf wichtige Informationen aufmerksam, mit denen Sie Ihr Produkt besser einsetzen können. VORSICHT: Ein VORSICHTSHINWEIS warnt vor möglichen Beschädigungen der Hardware oder vor Datenverlust und zeigt, wie diese vermieden werden können. WARNUNG: Mit WARNUNG wird auf eine potenziell gefährliche Situation hingewiesen, die zu Sachschäden, Verletzungen oder zum Tod führen kann. © 2018 – 2019 Dell Inc. oder Ihre Tochtergesellschaften.
Inhaltsverzeichnis Kapitel 1: Einführung....................................................................................................................... 5 Vorteile bei der Verwendung des Lifecycle Controller......................................................................................................5 Vorteile der Verwendung von iDRAC mit Lifecycle Controller........................................................................................ 6 Wichtige Funktionen..........................
Anzeigen des verwalteten Computersystems mit der Physischen-Computer-System-Ansicht....... 21 Jobverwaltung...................................................................................................................................................................... 21 Jobtypen......................................................................................................................................................................... 22 Systemstatus..........................................
1 Einführung Dell Lifecycle Controller bietet ein erweitertes und integriertes Systems Management zur Durchführung von Verwaltungs-Tasks, wie Bereitstellen, Konfigurieren, Aktualisieren, Warten und Diagnostizieren. Diese Funktionalität ist Teil der bandexternen iDRAC-Lösung (Integrated Dell Remote Access Controller) und in UEFI-Anwendungen (Unified Extensible Firmware Interface) der neuesten Dell Server integriert.
Vorteile der Verwendung von iDRAC mit Lifecycle Controller Sie können die folgenden Vorteile nutzen: ● Verbesserte Verfügbarkeit – Frühzeitige Benachrichtigungen zu potenziellen oder tatsächlichen Fehlern, die Sie dabei unterstützen, einen Serverausfall zu verhindern oder den zeitlichen Aufwand für die Wiederherstellung nach einem Ausfall zu reduzieren.
● ● ● ● Unterstützung für iDSM-Firmwareupdate hinzugefügt. Unterstützung für Firmwareupdate über HTTPS hinzugefügt. Die Standard-URL wurde von der Option in den FTP-Servereinstellungen entfernt. Die Standard-URL auf der HTTPS-Seite ist downloads.dell.com.
Über die Lifecycle Controller-API Lifecycle Controller-Remote Services ist eine standardbasierte Schnittstelle, die zum Beispiel eine Integration von Bare-MetalBereitstellungen und One-to-many-Betriebssystembereitstellungen für Remote-Server mithilfe von Konsolen ermöglicht. Lifecycle Controller von Dell nutzt die Funktionen der Lifecycle Controller-GUI und Lifecycle Controller-Remote Services, um so die Serverbereitstellung zu optimieren und zu vereinfachen.
Weitere nützliche Informationen Zusätzlich zu diesem Handbuch können Sie die folgenden Handbücher konsultieren, die unter dell.com/support/home oder dell.com/ idracmanuals zur Verfügung stehen: ● Die Lifecycle-Controller-Onlinehilfe enthält ausführliche Informationen zu den in der GUI verfügbaren Feldern und die dazugehörigen Beschreibungen. Zum Anzeigen der Onlinehilfe Informationen in Lifecycle Controller User Interface, klicken Sie auf Hilfe in der oberen rechten Ecke, oder drücken Sie .
● Das Handbuch zum Einstieg Getting Started Guide enthält eine Übersicht über die Systemfunktionen, die Einrichtung des Systems und technische Daten. ● Im Benutzerhandbuch erhalten Sie Informationen über Systemfunktionen, zur Fehlerbehebung am System und zur Installation oder zum Austausch von Systemkomponenten. ● Handbuch zur Lifecycle Controller-Web Services-Schnittstelle für Windows und Linux.
3. Wählen Sie das Land bzw. die Region in der Drop-Down-Liste Land oder Region auswählen am unteren Seitenrand aus. 4. Klicken Sie je nach Bedarf auf den entsprechenden Service- oder Support-Link.
2 Funktionen von Remote Services Wenn Sie Lifecycle Controller-Remote-Dienste verwenden, können Sie die folgenden Vorgänge ausführen: ● Bereitstellen und Konfigurieren ● Überwachung ● Wartung ● Erstellen und Planen von Jobs Themen: • • • • Bereitstellung und Konfiguration Überwachung Wartung Jobverwaltung Bereitstellung und Konfiguration Durch die Anwendung verschiedener Funktionen der Lifecycle Controller-Remote-Dienste können Sie während des Lebenszyklus eines Systems verschiedene Konfigurationen darau
Remote-Zugriffscontrollers sind in Ansichten unterteilt, um den Clients eine einfache Methodologie zur Verfügung zu stellen, um die iDRAC-Ansichten abzufragen und die iDRAC-Attribute festzulegen.
ANMERKUNG: Auf Dell PowerEdge-Servern der 13. Generation können Sie nun alle RAID-Konfigurationsaufgaben in Echtzeit ausführen, ohne dass der Host neu gestartet werden muss. Weitere Informationen zur RAID-Konfiguration finden Sie im Profildokument SimpleRaid, das unter https://downloads.dell.com/solutions/ general-solution-resources/White-Papers/Dell_SimpleRAID_Profile.pdf zur Verfügung steht. Lesen Sie für weitere Informationen das Benutzerhandbuch iDRAC User’s Guide, das auf www.dell.
● Protokoll- und Überwachungsinformationen von einem Server anzeigen. ● Netzwerkparameter eines Servers konfigurieren. Nach dem Anzeigen oder Bearbeiten der Informationen können Sie ein mobiles Gerät zur Fehlerbehebung und Konfiguration verwenden. Um diese Funktion zu verwenden, müssen Sie die OpenManage Mobile (OMM)-Softwareanwendung auf Ihrem mobilen Gerät installieren und die Blende auf dem Server aktivieren.
zu verfolgen und die Ergebnisse im Lifecycle-Protokoll zu protokollieren. Die Regeln für die Ermittlung des Serverkonfigurations-Profils und die Benennung sind deckungsgleich mit der DHCP-Bereitstellung. ANMERKUNG: Die USB-Konfigurationseinstellung steuert, ob das Systems von einem USB-Laufwerk aus konfiguriert werden darf.
● System ● Sensor Lifecycle-Protokoll Lifecycle-Protokolle enthalten Einträge zur Konfiguration und zu Firmware-Aktualisierungen von BIOS, Speicher-Controllern, LOMs und integrierten NIC-Karten, falls unterstützt. Das Lifecycle-Protokoll kann auf eine Netzwerkfreigabe exportiert oder auf einem USBLaufwerk gespeichert werden. Das Lifecycle-Protokoll ist über die iDRAC-Webschnittstelle, RACADM iDRAC REST-API mit Redfish und die WS-MAN-Schnittstelle zugänglich.
SupportAssist Collection SupportAssist Collection bietet Informationen zum Funktionszustandsreport von Hardware, Betriebssystem (BS) und SoftwareAnwendungen, die auf einem Server installiert sind. Diese Funktion umfasst die erfassten Anwendungsinformationen des Dell System E-Support Tool (DSET). Diese Auswertung wird von Administratoren zur Lösung geschäftskritischer Probleme verwendet.
● Aktivieren des RAID-Modus auf Speicher-Controllern: PERC S110- und PERC S130-Geräte erfordern zwei Importvorgänge. Der erste ist erforderlich, um den integrierten SATA-Controller in den RAID-Modus zu setzen und der zweite, um den RAID-Controller für bestimmte Vorgänge zu konfigurieren, z. B. das Erstellen einer virtuellen Festplatte. Beispiel: Falls das BIOS-Attribut EmbSata auf dem Importsystem nicht auf RAIDMode gesetzt ist, muss der erste Import Folgendes enthalten: PAGE 20Weitere Informationen zur automatischen Aktualisierung finden Sie im White Paper Automatic Updates in Dell PowerEdge 12th Generation Servers (Automatische Updates auf Dell PowerEdge-Servern der 12. Generation), das unter www.delltechcenter.com/ systemsmanagement verfügbar ist. Teilersetzung Die Teilersetzungsfunktion ermöglicht die automatische Aktualisierung der Firmware und Konfiguration gerade ausgetauschter Komponenten und passt die Einstellungen dem Originalteil an.
● LC Data ● Diagnose ● Treiberpaket Die Benutzerinformation wird dauerhaft gelöscht und Sie können diese nicht wiederherstellen. BIOS und iDRAC bleiben funktionsfähig, wohingegen Diagnose und Treiberpakete neu installiert werden können. Verwaltung des Web-Server-Zertifikats Standardmäßig ist ein selbstsigniertes Zertifikat auf dem iDRAC verfügbar.
● Berichtserstellung für geplante Jobs – Von allen geplanten Jobs wird über den Auswahlfilter „JobStatus = Scheduled“ ein Bericht erstellt. Jobtypen Es gibt zwei Jobtypen: systemerstellte Jobs (implizit) und benutzererstellte Jobs (explizit): ● Systemerstellte Jobs werden beim Ausführen spezifischer Remote Services-Tasks erstellt. Beispielsweise erstellen Remote ServicesFunktionen, wie z.B.
3 Erste Schritte mit zusätzlicher API und Links Die ersten Schritte bei jeder Funktion des Lifecycle Controller starten auf der Startseite des Dell TechCenter Lifecycle Controller – www.delltechcenter.com/lc. Die Startseite enthält verschiedene Abschnitte mit Verweisen auf URLs, welche wiederum direkte Links zu den entsprechenden Abschnitten sind. Befolgen Sie diese Schritte, um mit der Nutzung der Lifecycle Controller-API zu beginnen: 1.
Tabelle 2. Profile (fortgesetzt) Profilname Beschreibung BIOS und Startverwaltung Das BIOS- und Startverwaltungsprofil erweitert die Verwaltungsfunktionen zur Referenzierung von Profilen durch Hinzufügen der Funktion, die Konfiguration des System-BIOS-Setups darzustellen und den Systemstart zu verwalten. CPU Das DCIM-CPU-Profil beschreibt die Eigenschaften und Schnittstellen zur Ausführung von Systemverwaltungstasks, die in Verbindung mit der Verwaltung eines Prozessors im System stehen.
Tabelle 2. Profile (fortgesetzt) Profilname Beschreibung Mit der Methode „DCIM_LCService.ExportCompleteLCLog()“ können Sie das Lifecycle-Protokoll vollständig exportieren. Mit der Methode „DCIM_LCService.ImportSystemConfigurationPreview“ können Sie eine Vorschau auf eine XML-Vorlage aufrufen, bevor Sie die XML-Vorlage anwenden. Der Anbieter von „DCIM_LCService“ fügt die folgenden Methoden für die automatische Diagnose hinzu: RunePSADiagnostics () und ExportePSADiagnosticsResult().
Tabelle 2. Profile (fortgesetzt) Profilname Beschreibung Startmodus ignoriert der PERC Fehler beim Start oder führt die standardmäßig auszuführende Aktion aus. ● 4K-Sektoren-Laufwerke: PERC 9 bietet Unterstützung für Festplatten mit einer Sektorengröße von 4.000. Mit dieser Funktion erzielen Kunden durch die Nutzung neuer Festplatten mit 4.000 Sektoren eine schnellere Datenübertragung mit weniger Befehlen.
WSMAN MOF WSDL- und XSD API-Definitionen Als Ergänzung zur Profildokumentation dient die Managed-Verwaltungsobjektdatei (MOF), die die Klassenimplementierung von Dellspezifischen CIM-Klassen dokumentiert. Die Dateien für Web Service Description Language (WSDL) und XML-Schema Definition (XSD) beschreiben die daraus resultierende Funktionalität.
Der Best Practice Guide enthält detaillierte Anweisungen für gängige Workflows, mit denen verschiedene Tasks auf Grundlage von WinRM oder WSMAN ausgeführt werden können. Die Skriptsprache PYTHON wird verwendet, um ein Software Development Kit (SDK) für die Methoden der Lifecycle Controller-API bereitzustellen. Die folgenden primären Ziele werden über das SDK angestrebt: ● Die im Best Practices Guide beschriebenen Methoden erläutern die gängigen und erprobten API-Methodologien.
Autorisierungs- und Lizenzierungsanforderungen für den API-Zugriff Es gibt vier Stufen bei der iDRAC-Lizenzierung: ANMERKUNG: Verwenden Sie den Link en.community.dell.com/techcenter/extras/m/white_papers/20067632.aspx, um den Informationsbericht WSMAN License and Privilege Specification (Lizenzierungs- und Zugriffsrechtspezifizierung für WSMAN) herunterzuladen. ● ● ● ● Basisverwaltung mit IPMI Express Express für Blades Enterprise Tabelle 3.
4 Integrieren der Lifecycle Controller-API In diesem Kapitel ist beschrieben, welche Ressourcen erforderlich sind, um die Lifecycle Controller-API in eine Anwendung zu integrieren: ● API-Clients – Führt die API-Clients auf, die zur Verfügung stehen, um WinRM oder WSMAN zu unterstützen. Mit den API-Clients können Sie Anwendungen in einer Vielzahl von Programmiersprachen erstellen.
● Weitere Skriptbeispiele – ttps://downloads.dell.com/solutions/general-solution-resources/White_Papers/ Lifecycle_Controller_Remote_Firmware_Update_Scripting.pdf Das Github-Repository „iDRAC-Redfish-Scripting“ enthält Beispiele für Python- und PowerShell-Skripterstellung für die iDRAC-REST-API mit Redfish. Die Skripts zeigen wichtigste Anwendungsfälle für Serverbestandsaufnahme, Konfiguration, Überwachung und Aktualisierung. ● iDRAC REST-API mit Redfish – https://github.
5 Social Media-Referenz Um die neuesten Informationen abzurufen, gehen Sie auf Dell TechCenter, und suchen Sie dort nach den gewünschten Informationen. Tabelle 4. Produktinformationen Produktname und Thema Link zum Dell TechCenter Lifecycle Controller www.dell.com/idracmanuals Integrated Dell Remote Access Controller (iDRAC) www.dell.com/idracmanuals Dell Chassis Management Controller www.dell.com/cmcmanuals Allgemeines Forum zur Systemverwaltung www.dell.
6 Begriffe und Definitionen In der folgenden Tabelle sind die Begriffe aufgeführt, die in diesem Dokument verwendet werden sowie deren Definitionen. Tabelle 5. Begriffe und Definitionen Begriff Definition LC Lifecycle-Controller Aufzählen Bezieht sich auf den Vorgang WS-MAN ENUMERATE, so wie in Kapitel 8.2 von DSP0226_V1.1 und Kapitel 9.1 von DSP0227_V1.0 beschrieben. Abrufen Bezieht sich auf den Vorgang WS-MAN GET, so wie in Kapitel 7.3 von DSP00226_V1.1 und Kapitel 7.1 von DSP0227_V1.