Owners Manual

Figure 22. Removing a memory module
a. memory module
b. memory module socket
c. memory module ejector (2)
1. If you are removing a memory module permanently, install a memory module blank.
NOTE:
The procedure for removing and installing a memory module blank is identical to removing and installing a
memory module.
2. Install the memory riser.
3. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 60
Related tasks
Before working inside your system on page 61
Removing a memory riser on page 73
Installing memory modules on page 77
Installing a memory riser on page 74
After working inside your system on page 61
Installing memory modules
NOTE:
The memory modules are hot to touch for some time after the system has been powered down. Allow the memory
modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components
or metallic contacts on the memory module.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
1. To open the memory riser, open the flip out brackets on the memory riser.
2. Locate the appropriate memory module socket.
Installing and removing system components
77