Setup Guide

Installation Guide 25

Flip the hinges and secure them on the opposite side of the extension

using screws and nuts. See Figure 12.

The two hinges at the top have the number

marked on them and the

bottom two hinges have the number

marked on them.

NOTE: The orientation of the number 1 is right-side up and the orientation of

the number 2 is upside down.

NOTE: Each hinge is secured to the extension using only one screw and all

the screws are installed in the top hinge hole.

Figure 12. Installing the Hinges on the Extension

1 hinges (4) 2 screws and nuts (4 each)