Reference Guide
Table Of Contents
- Dell EMC PowerEdge RAID Controller Command Line Interface Reference Guide
- Contents
- Overview
- Accessing the command prompt
- Working with the PERC Command Line Interface Tool
- System commands
- Controller commands
- Drive commands
- Virtual drives commands
- Add virtual drives commands
- Delete virtual drives commands
- Delete non-RAID disks
- Virtual drive show commands
- Preserved cache commands
- Change virtual drive properties commands
- Virtual drive initialization commands
- Virtual drive erase commands
- Virtual drive migration commands
- Virtual drive consistency check commands
- Background initialization commands
- Foreign configurations commands
- BIOS-related commands
- Drive group commands
- BBU commands
- Enclosure commands
- PHY commands
- Logging commands
- PERC CLI command examples
- Getting a complete list of CLI commands
- Checking controller availability
- Viewing controllers
- Viewing free space information
- Viewing disk1 information
- Viewing controller, virtual disk, and drivers information
- Checking for preserved cache
- Deleting preserved cache
- Viewing expansion information
- Viewing expansion size
- Viewing the foreign configuration
- Importing the foreign configuration
- Viewing BBU information
- Viewing physical drive details for the specified slot in the controller
- Viewing the boot drive for the controller
- Setting virtual drive as boot drive
- Locating a drive
- Stopping a locate operation
- Snapdump commands
- Getting help
- Documentation resources
UGUnsp-Unsupported
Drive /c0/e32/s4 - Detailed Information :
=======================================
Drive /c0/e32/s4 State :
======================
Shield Counter = 0
Media Error Count = 0
Other Error Count = 0
Drive Temperature = 43c <109.40F>
Predictive Failure Count = 0
S.M.A.R.T alert flagged by drive = No
Drive /c0/e32/s4 Device attribute :
=================================
SN = S2G01H5T
WWN = 5000C5006B1A4FB8
Firmware Revision = VB44
Raw size = 558.911 GB [0x8bba5f6 Sectors]
Coerced size = 558.375 GB [0x8b98000 Sectors]
Non Coerced size = 558.411 GB [0x8b9a5f6 Sectors]
Device Speed = 6.0Gb/s
Link Speed = 6.0Gb/s
Logical Sector Size = 4 KB
Physical Sector Size = 4 KB
Drive /c0/e32/s4 Policies/Settings :
==================================
Drive position = DriveGroup:0, Span:0, Row:3
Enclosure Position = 0
Connected Port Number = 0<path0>
Sequence Number = 2
Commissioned Spare = No
Emergency Spare = No
Last Predictive Failure Event Sequence Number = 0
Successful diagnostics completion on = N/A
SED Capable = Yes
SED Enabled = Yes
Secured = Yes
Locked = No
Needs EKM Attention = No
PI Eligible = Yes
Drive is formatted for PI = Yes
PI type = 2
Number of bytes of user data in LBA = 4 KB
Certified = Yes
Wide Port Capable = No
Port Information :
================
--------------------------------------------
Port Status Linkspeed SAS address
--------------------------------------------
0 Active 6.0Gb/s 0x5000c5006b1a4fba
1 Active 6.0Gb/s 0x0
--------------------------------------------
Inquiry Data =
00 00 06 12 8b 01 30 02 53 45 41 47 41 54 45 20
53 54 36 30 30 4d 50 30 30 38 34 20 20 20 20 20
56 42 34 34 53 32 47 30 31 48 35 54 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 43 6f 70 79 72 69 67 68 74 20 28 63 29 20 32
30 31 33 20 53 65 61 67 61 74 65 20 41 6c 6c 20
Working with the PERC Command Line Interface Tool
59