Users Guide

Figure 14. Removing and installing a H730P slim card

stando (2) 2 H730P slim card cable connector

3 pull tag 4 H730P slim card

5 H730P slim card release latch 6 lock and unlock icon on the H730P slim card bracket

Replacing the battery of a H730P slim card

The battery attached to the H730P slim card can be replaced.

1 Turn o the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.

NOTE

: It is recommended that you always use a static mat and static strap while working on components in the interior

of the system.

2 Open the system.

3 Locate the H730P slim card on the system board.

4 Remove the H730P slim card. For more information, see Removing a H730P Slim card.

5 Remove the screw that secures the battery along with the exible cable retainer to the H730P slim card.

6 Remove the clamp that secures the battery along with the exible cable retainer to the H730P slim card.

7 Pull the blue tab to an upright position, until the top of the battery is out of the battery holder on the H730P slim card.

8 Disconnect the battery cable from the H730P slim card.

9 Lift the battery out of the battery holder.

Deploying the PERC card