Users Guide

Previous Conguration Of Disks Removed Error Message
(Fehlermeldung "Vorherige Festplattenkonguration wurde
entfernt")
Error Message:
All of the disks from your previous configuration are gone. If this is an
unexpected message, then please power off your system and check your cables to
ensure all disks are present. Press any key to continue, or press <C> to load
the configuration utility.
Mögliche Ursache: Einige kongurierte Laufwerke wurden aus dem System entfernt. Wenn die Laufwerke nicht entfernt wurden, ist
der Zugri aus anderen Gründen nicht mehr möglich. Möglicherweise sind die SAS-Kabel des Systems nicht
ordnungsgemäß angeschlossen.
Korrekturmaßnahme
:
Überprüfen Sie die Kabelverbindungen und beheben Sie etwaige Probleme vor dem Neustart des Systems. Wenn
alle Kabel ordnungsgemäß angeschlossen sind, drücken Sie zum Fortfahren eine beliebige Taste oder <C>.
Missing Virtual Disks Error Message (Fehlermeldung "Fehlende
virtuelle Festplatten")
Fehlermeldung:
The following virtual disks are missing: (x). If you proceed (or load the
configuration utility), these virtual disks will be removed from your
configuration. If you wish to use them at a later time, they will have to be
imported. If you believe these virtual disks should be present, please power
off your system and check your cables to ensure all disks are present. Press
any key to continue, or 'C' to load the configuration utility.
Mögliche Ursache: Einige kongurierte Laufwerke wurden aus dem System entfernt. Wenn die Laufwerke nicht entfernt wurden, ist
der Zugri aus anderen Gründen nicht mehr möglich. Möglicherweise sind die SAS-Kabel des Systems nicht
ordnungsgemäß angeschlossen.
Korrekturmaßnahme
:
Überprüfen Sie die Kabelverbindungen und beheben Sie etwaige Probleme. Wenn alle Kabel ordnungsgemäß
angeschlossen sind, drücken Sie zum Fortfahren eine beliebige Taste oder <C>.
Dirty Cache Data Error Message (Fehlermeldung "Fehlerhafte
Cache-Daten")
Fehlermeldung:
The following virtual disks are missing: (x). If you proceed (or load the
configuration utility), these virtual disks will be removed from your
configuration. If you wish to use them at a later time, they will have to be
imported. If you believe these virtual disks should be present, please power
off your system and check your cables to ensure all disks are present. Press
any key to continue, or 'C' to load the configuration utility. The cache
contains dirty data, but some virtual disks are missing or will go offline, so
the cached data cannot be written to disk. If this is an unexpected error, then
please power off your system and check your cables to ensure all disks are
present. If you continue, the data in cache will be permanently discarded.
Press 'X' to acknowledge and permanently destroy the cached data.
106 Fehlerbehebung