Users Guide

옵션 설명
렇게 하면 BIOS 사용 컨트롤러에서 자동으로 부팅될 있습니
.
Select Bootable Device(부팅 가능 장치 선택)
가상 디스크를 컨트롤러의 부팅 디스크로 지정하려면 옵션을
선택합니다.
옵션은 가상 디스크를 구축한 경우 표시됩니다.
Enable Auto Import(자동 가져오기 활성화) BIOS 구성 유틸리티(<Ctrl> <R>) 액세스할 필요 없이 부팅하
동안 모든 온라인 외부 구성을 가져오도록 시도합니다.
Factory Default(출하 기본값) Settings(설정) 상자에 있는 옵션에 대한 기존 설정을 복원하려
옵션을 선택합니다.
특성 모드 HBA 모드로 전환하려면 옵션을 선택합니다. 기본 모드는
RAID 모드입니다.
더티 캐시 데이터 오류 메시지
오류 메시지:
The following virtual disks are missing: (x). If you proceed (or load the
configuration utility), these virtual disks will be removed from your
configuration. If you wish to use them at a later time, they will have to be
imported. If you believe these virtual disks should be present, please power
off your system and check your cables to ensure all disks are present. Press
any key to continue, or 'C' to load the configuration utility. The cache
contains dirty data, but some virtual disks are missing or will go offline, so
the cached data cannot be written to disk. If this is an unexpected error, then
please power off your system and check your cables to ensure all disks are
present. If you continue, the data in cache will be permanently discarded.
Press 'X' to acknowledge and permanently destroy the cached data.
발생 원인: 디스크가 누락된 물리 디스크로 인해 삭제되거나 오프라인 상태인 경우 컨트롤러가 가상 디스크의 더티 캐시
보존합니다. 메시지는 구성된 일부 디스크가 제거되었음을 나타냅니다. 디스크가 제거된 경우 이상
액세스할 없습니다. 시스템의 SAS 케이블이 올바르게 연결되어 있지 않을 있습니다.
수정 조치: 케이블 연결을 확인하고 문제를 해결한 시스템을 다시 시작하십시오. <Ctrl> <R> 유틸리티를 사용하여
디스크를 가져오거나 보존된 캐시를 삭제합니다. 보존된 캐시를 관리하는 과정은 보존된 캐시 관리 항목을
참조하십시오.
검색 오류 메시지
오류 메시지:
A discovery error has occurred, please power cycle the system and all the
enclosures attached to this system.
발생 원인: 메시지는 검색이 120 내에 완료되지 않았음을 나타냅니다. 시스템의 SAS 케이블이 올바르게 연결되어
않을 있습니다.
수정 조치: 케이블 연결을 확인하고 문제를 해결한 시스템을 다시 시작하십시오.
드라이브 구성 변경 오류 메시지
오류 메시지:
Entering the configuration utility in this state will result in drive
configuration changes. Press 'Y' to continue loading the configuration utility
or please power off your system and check your cables to ensure all disks are
UEFI/HII RAID 구성 유틸리티 89