Reference Guide
Table Of Contents
- Dell EMC PowerEdge RAID Controller Command Line Interface Reference Guide
- Contents
- Overview
- Accessing the command prompt
- Working with the PERC Command Line Interface Tool
- System commands
- Controller commands
- Drive commands
- Virtual drives commands
- Add virtual drives commands
- Delete virtual drives commands
- Delete non-RAID disks
- Virtual drive show commands
- Preserved cache commands
- Change virtual drive properties commands
- Virtual drive initialization commands
- Virtual drive erase commands
- Virtual drive migration commands
- Virtual drive consistency check commands
- Background initialization commands
- Foreign configurations commands
- BIOS-related commands
- Drive group commands
- BBU commands
- Enclosure commands
- PHY commands
- Logging commands
- PERC CLI command examples
- Getting a complete list of CLI commands
- Checking controller availability
- Viewing controllers
- Viewing free space information
- Viewing disk1 information
- Viewing controller, virtual disk, and drivers information
- Checking for preserved cache
- Deleting preserved cache
- Viewing expansion information
- Viewing expansion size
- Viewing the foreign configuration
- Importing the foreign configuration
- Viewing BBU information
- Viewing physical drive details for the specified slot in the controller
- Viewing the boot drive for the controller
- Setting virtual drive as boot drive
- Locating a drive
- Stopping a locate operation
- Snapdump commands
- Getting help
- Documentation resources
Description
Displays the number of controllers detected in the server.
Result
Status Code = 0
Status = Success
Description = None
Controller Count = 1
Viewing free space information
Syntax
perccli /c0 show freespace
Description
Displays the free space details of the controller.
Result
Status Code = 0
Status = Success
Description = None
FREE SPACE DETAILS :
==================
Total Slot Count = 0
ID-Index|DG-Drive Group|AftrVD-Identify Freespace After VD
Viewing disk1 information
Syntax
perccli /c0/d1 show
Description
Displays information about disk1.
Result
Controller = 0
Status = Success
Description = Show Diskgroup Succeeded
TOPOLOGY :
Working with the PERC Command Line Interface Tool
51