Users Guide
Figure 15. Removing the battery
1
screw securing the battery to the H730P slim card 2 clamp securing the battery to the H730P slim card
3 tab 4 H730P slim card
5 battery 6 battery holder
7 battery cable 8 exible cable retainer
10 Insert the battery into the battery holder.
11 Push the blue tab toward the inserted battery.
12 Attach the clamp that secures the battery along with the exible cable retainer to the H730P slim card.
13 Attach the screw that secures the battery along with the exible cable retainer to the H730P slim card.
14 Connect the battery cable to the H730P slim card.
15 Replace the H730P slim card. For more information, see Installing a H730P Slim card.
16 Close the system.
17 Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals.
Installing a H730P slim card
1 Turn o the system, including any attached peripherals, and disconnect the system from the electrical outlet.
NOTE
: It is recommended that you always use a static mat and static strap while working on components in the interior
of the system.
2 Open the system.
3 Press the release latch on the side of the chassis to the unlock position.
4 Align the slots on the H730P slim card with the standos on the side of the chassis.
CAUTION
: To prevent damage to the system memory, ensure that the H730P slim card does not come in contact with
the memory modules during installation
Deploying the PERC card 49