Users Guide
HII Configuration utility dashboard view options
The first screen that is displayed when you access the HII Configuration Utility is the Dashboard View screen. The following
table provides detailed information about the options available on the Dashboard View screen.
Table 8. Dashboard view screen
Dashboard view options Description
Main menu Displays the following configuration options:
● Configuration Management
● Controller Management
● Virtual Disk Management
● Physical Disk Management
● Hardware Components
Help Provides context sensitive help message.
Properties Displays the following information about the controller:
● Status — displays the status of the controller.
● Backplane — displays information about the number of backplanes connected to the
controller.
● BBU — displays information about the availability of Battery Backup Unit (BBU).
● Enclosure — displays information about the number of enclosures connected to the
controller.
● Physical Disks — displays information about the number of physical disks connected to the
controller.
● Disk Groups — displays information about the number of disk groups connected to the
controller.
● Virtual Disks — displays information about the number of virtual disks connected to the
controller.
View server profile Displays HII Spec version supported on the system and also displays the following menu
options for controller components:
● Controller Management
● Hardware Components
● Physical Disk Management
● Virtual Disk Management
Actions Displays the following options:
● Configure — displays configuration options that are supported by the controller.
● Set Factory Defaults — restore factory default values for all controller properties.
Background operations Displays if virtual disk or physical disk operations are in progress.
Configuration management
Auto Configure RAID 0
1. Enter the Dell PERC 10 Configuration Utility. See Navigating to Dell PERC 10 configuration utility.
2. Click Main Menu > Configuration Management > Auto Configure RAID 0.
3. Select Confirm and click Yes to continue.
A RAID 0 Virtual disk is created on all physical disks that are in Ready state.
NOTE: This feature is not supported on PERC H345 and eHBA mode.
HII configuration utility 55