Reference Guide

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 43 6f 70 79 72 69 67 68 74 20 28 63 29 20 32
30 31 33 20 53 65 61 67 61 74 65 20 41 6c 6c 20
Viewing the boot drive for the controller
Syntax
perccli /c0 show bootdrive
Description
Displays the boot drive for the controller. The boot drive can be a physical drive or a virtual drive.
Result
Controller = 0
Status = Success
Description = None
Controller Properties :
=====================
-----------------
Ctrl_Prop Value
-----------------
BootDrive VD:13
-----------------
Setting virtual drive as boot drive
Syntax
perccli /c0/v13 set bootdrive = on
Description
Sets the specified virtual drive as the boot drive. During the next reboot, the BIOS looks for a boot sector in the specified virtual
drive.
NOTE: Set bootdrive is applicable only in legacy BIOS mode and is not supported in UEFI mode.
Result
Controller = 0
Status = Success
Description = None
Detailed Status :
===============
----------------------------------------------
VD Property Value Status ErrCd ErrMsg
----------------------------------------------
60
Working with the PERC Command Line Interface Tool