Reference Guide

perccli /cx show freespace
perccli /cx show sasadd
perccli [verbose] -h| -help| ?
perccli /cx restart
perccli v
perccli /call show
This command shows information on all the controllers present on the host.
Input example:
perccli /call show
perccli /cx download bios file=<filepath>
Use this command to update the BIOS component on all supported controllers.
Input example:
perccli /c1 download bios file=<filepath>
perccli /cx download file=<filepath>
Use this command to flash the firmware with the .rom file to a specified adapter from the provided file location (file path is the
absolute file path).
Input example:
perccli /cx download file=<filepath>
perccli /cx/ex/sx start locate
Use this command to turn on the drive LED flash to locate physical drives.
Input example:
perccli /c1/e10/s12 start locate
perccli /cx/ex/sx stop locate
Use this command to turn off the drive LED flash to locate physical drives.
Input example:
perccli /c1/e10/s12 stop locate
perccli /cx/pall show
This command shows the basic PHY layer information on a specified adapter.
Input example:
perccli /c1/pall show
perccli /cx show
This command shows the summary of the controller information. The summary includes basic controller information, foreign
configurations, drive groups, virtual drives, physical drives, enclosures, and BBU information.
Input example:
Working with the PERC Command Line Interface Tool
19