Reference Guide

ManualsBrandsDell ManualsConverged InfrastructurePowerEdge RAID Controller H830

0 0 - - - RAIDS Opt1 N 1.635 TB dflt N V dflt N

0 0 0 32:0 0 DRIVE Onln N 558.375 GB dflt N V dflt -

0 0 1 32:1 1 DRIVE Onln N 558.375 GB dflt N V dflt -

0 0 2 32:3 3 DRIVE Onln N 558.375 GB dflt N V dflt -

0 0 3 32:4 4 DRIVE Onln N 558.375 GB dflt N V dflt -

1 - - - - RAID0 Opt1 N 558.375 GB dflt N V dflt N

1 0 - - - RAID0 Opt1 N 558.375 GB dflt N V dflt N

1 0 0 32:2 2 DRIVE Onln N 558.375 GB dflt N V dflt -

-----------------------------------------------------------------------------

Virtual Drives = 2

VD LIST :

=======

------------------------------------------------------------------

DG/VD Type State Access Consist Cache sCC Size Name

------------------------------------------------------------------

0/0 RAID5 Opt1 RW Yes RWTD - 1.635 TB

1/1 RAID0 Opt1 RW Yes RWTD - 558.375 GB Test

------------------------------------------------------------------

Physical Drives = 9

PD LIST :

=======

-------------------------------------------------------------------------

EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp

-------------------------------------------------------------------------

32:0 0 Onln 0 558.375 GB SAS HDD Y Y 4 KB ST600MP0084 U

32:1 1 Onln 0 558.375 GB SAS HDD Y Y 4 KB ST600MP0084 U

32:2 2 Onln 1 558.375 GB SAS HDD Y N 512B ST600MP0054 U

32:3 3 Onln 0 558.375 GB SAS HDD Y Y 4 KB ST600MP0084 U

32:4 4 Onln 0 558.375 GB SAS HDD Y Y 4 KB ST600MP0084 U

32:5 5 UGood - 558.375 GB SAS HDD N N 512B ST600MP0034 U

32:6 6 UGood - 558.375 GB SAS HDD Y N 512B ST600MP0054 U

32:7 7 UGood - 558.375 GB SAS HDD N N 512B ST600MP0034 U

32:18 18 UGood - 558.375 GB SAS HDD Y N 512B ST600MP0054 U

-------------------------------------------------------------------------

Cachevault_info :

===============

-------------------------------------

Model State Temp Mode MfgDate

-------------------------------------

BBU Failed 76C - 2011/07/18

-------------------------------------

Checking for preserved cache

Syntax

perccli /c0 show preservedcache

Description

Displays available preserved cache.

Result

Controller = 0

Status = Success

Description = None

------------

Working with the PERC Command Line Interface Tool