Reference Guide

Result
Controller = 0
Status = Success
Description = None
BBU_Info :
========
----------------------
Property Value
----------------------
Type BBU
Voltage 3 mV
Current 0 mA
Temperature 32 C
Battery State Optimal
----------------------
BBU_Firmware_Status :
===================
-------------------------------------------------
Property Value
-------------------------------------------------
Charging Status None
Voltage OK
Temperature OK
Learn Cycle Requested No
Learn Cycle Active No
Learn Cycle Status OK
Learn Cycle Timeout No
I2C Errors Detected No
Battery Pack Missing No
Replacement required No
Remaining Capacity Low No
Periodic Learn Required No
Transparent Learn No
No space to cache offload No
Pack is about to fail & should be replaced No
Cache Offload premium feature required No
Module microcode update required No
-------------------------------------------------
GasGaugeStatus :
==============
-------------------------------------
Property Value
-------------------------------------
Fully Discharged Yes
Fully Charged Yes
Discharging No
Initialized No
Remaining Time Alarm No
Remaining Capacity Alarm Yes
Terminate Discharge Alarm No
Over Temperature No
Charging Terminated No
Over Charged No
Relative State of Charge 100%
Charger System State Complete
Remaining Capacity 407
Full Charge Capacity 407
Is SOH Good Yes
Battery backup charge time 0 hour(s)
-------------------------------------
BBU_Capacity_Info :
=================
------------------------------------------------------
Property Value
------------------------------------------------------
Relative State of Charge 100%
Absolute State of charge 0%
Working with the PERC Command Line Interface Tool
57