Users Guide
Disk Carrier LED Indicators
The LED on the physical disk carrier indicates the state of each physical disk. Each disk carrier in your enclosure has two LEDs: an activity
LED (green) and a status LED (bicolor, green/amber). The activity LED is active whenever a disk is being accessed while the status LED
indicates when a disk is being spun up, is rebuilding, or is in a fault state.
Figure 23. Disk Carrier LED Indicators
1 activity LED
2 status LED
HII error messages
Unhealthy Status of the Drivers
Error:
One or more boot driver(s) have reported issues. Check the Driver Health Menu
in Boot Manager for details.
Probable Cause: This message might indicate that the cables are not connected, the disks might be missing, or the UEFI driver
might require conguration changes.
Corrective Action:
1 Check if the cables are connected properly, or replace missing hard drives, if any and then restart the system.
2 Press any key to load the driver health manager to display the congurations. The Driver Health Manager
displays the driver(s), which requires conguration.
3 Alternately, if the UEFI driver requires conguration, press any key to load the Conguration Utility.
Troubleshooting 111