Users Guide

not required. The source RAID level column indicates the virtual disk RAID level before the RLM/OCE operation and the target RAID level
column indicates the RAID level after the RLM/OCE operation.
CAUTION: Do not attempt disk migration during RLM or OCE operations. This causes loss of virtual disk.
NOTE: If an an RLM or an OCE operation is in progress, then an automatic drive rebuild or copyback operation will not start until
the operation is complete.
NOTE: If the controller already contains the maximum number of virtual disks, you cannot perform a RAID level migration or
capacity expansion on any virtual disk.
NOTE: The controller changes the write cache policy of all virtual disks to Write-Through until the RLM or OCE operation is
complete.
NOTE: RLM is supported only on the H730 and H830 controller, and is not supported on the H330 controller.
Features 31