Instruction Manual

Table A-1. System Board Jumper Settings
System Board Connectors
See FigureA-3 and TableA-2 for the location and description of system board connectors. FigureA-3 also indicates expansion slots and bus operating speeds.
Figure A-3. System Board Connectors
Table A-2.SystemBoardConnectors

Jumper

Setting

Description
PASS
(default)
The password feature is enabled.
The password feature is disabled.
CLR CMOS
(default)
The configuration settings in NVRAM are retained at system boot.
The configuration settings in NVRAM are cleared at next system boot.
jumpered unjumpered

