Manual


Table A-1.SystemBoardJumperSettings

System Board Connectors

See FigureA-3 and TableA-2 for the location and description of system board connectors. FigureA-3 also indicates expansion slots and bus operating speeds.
Figure A-3. System Board Connectors


Table A-2.SystemBoardConnectors
Jumper
Setting
Description
PSWD_JMP
 (default)
The password feature is enabled.

The password feature is disabled.
RTCRST
 (default)
The configuration settings in NVRAM are retained at system boot.

The configuration settings in NVRAM are cleared at next system boot.
 jumpered unjumpered
Connector
Description
12VPOWER
System board power
AUX_LED
Hard drive activity connector for controller cards