Owner`s manual

16 About Your System
Diagnostic Lights
The four diagnostic indicator lights on the system front panel display error
codes during system startup. Table 1-5 lists the causes and possible corrective
actions associated with these codes. A highlighted circle indicates the light is
on; a non-highlighted circle indicates the light is off.
NOTE: If the power LEDs blink amber, there is a problem with the power supply. If
the power LED shows a solid amber, a BIOS failure occurred before Power-On Self
Test (POST).
Table 1-5. Diagnostic Indicator Codes
Code Causes Corrective Action
The computer is in a
normal off condition or a
possible pre-BIOS failure
has occurred.
The diagnostic lights are
not lit after the system
successfully boots to the
operating system.
Plug the computer into a working
electrical outlet and press the
power button.
The system is in a normal
operating condition after
POST.
Information only.
BIOS checksum failure
detected; system is in
recovery mode.
See "Getting Help" on page 141.
Possible processor failure. See "Troubleshooting the
Microprocessor" on page 129.
Memory failure. See "Troubleshooting System
Memory" on page 118.
Possible expansion card
failure.
See "Troubleshooting Expansion
Cards" on page 127.
book.book Page 16 Wednesday, June 24, 2009 8:21 AM