Owners Manual

Installing System Components 65
Figure 3-7. Removing and Installing an Optical Drive (SATA Connection)
7 If you are installing another drive in the bay, see "Installing an Optical or
Tape Drive" on page 66.
8 If the drive is being permanently removed, install an insert on the front
bezel. See "Installing Front Bezel Insert" on page 61.
9 Replace the front bezel. See "Installing the Front Bezel" on page 60.
10 Close the system. See "Closing the System" on page 58.
1 power/data cable 2 drive release latch
3 drive bay screw slots 4 optical drive
5 optical drive shoulder screws (3)
5
4
2
3
1
Mayzie_HOM.book Page 65 Monday, August 31, 2009 9:33 PM