Owners Manual

Installing System Components 69
Figure 3-9. Removing or Installing a Hard Drive
NOTE: If you are not replacing the hard drive, remove the drive from the drive
bracket (see Figure 3-11) and insert the empty bracket back into the drive bay.
5 Detach the hard-drive bracket from the hard drive by pushing out at the
edges of the bracket and removing the hard drive. See
Figure 3-11 .
6 Replace the system cover. See "Closing the System" on page 58.
7 Place the system upright on a flat, stable surface.
8 Reattach any peripherals and connect the system to an electrical outlet.
9 Turn on the system and attached peripherals.
1 hard drive 2 power/data cable
3 tabs (2) 4 hard drive bracket
2
4
3
1
Mayzie_HOM.book Page 69 Monday, August 31, 2009 9:33 PM