CLI Guide

This command displays all enclosure objects for the connector FQDD.
racadm storage get enclosures -o
Enclosure.Internal.0-1:RAID.Integrated.1-1
Table 96. Details of storage get enclosure
Status Ok
State Ready
DeviceDescription Backplane 1 on Connector 0 of Integrated
RAID Controller 1
RollupStatus Ok
Name BP13G+EXP 0:1
BayId 1
FirmwareVersion 0.23
SasAddress 0x500056B31234ABFD
SlotCount 24
The following command displays all enclosure keys that are connected to the connectors:
racadm storage get enclosures --refkey RAID.Integrated.1-1
Enclosure.Internal.0-1:RAID.Integrated.1-1
The following command is an optimized and filtered version:
racadm storage get enclosures --refkey RAID.Integrated.1-1 -o -p Name
Enclosure.Internal.0-1:RAID.Integrated.1-1
Name = BP12G+EXP 0:1
• To generate and view information about the inventory of physical disk drives connected to the enclosure or backplanes, run the
following command:
racadm storage get pdisks
Disk.Bay.0:Enclosure.Internal.0-1:RAID.Integrated.1-1
The following command is an optimized version and displays the full controller objects along with their keys:
racadm storage get pdisks -o
Disk.Bay.0:Enclosure.Internal.0-1:RAID.Slot.4-1
Status = Ok
DeviceDescription = Disk 0 in Backplane 1 of RAID Controller in Slot 4
RollupStatus = Ok
Name = Physical Disk 0:1:0
State = Online
OperationState = Not Applicable
PowerStatus = Spun-Up
Size = 1117.250 GB
FailurePredicted = NO
RemainingRatedWriteEndurance = Not Applicable
SecurityStatus = Not Capable
BusProtocol = SAS
MediaType = HDD
UsedRaidDiskSpace = 200.001 GB
AvailableRaidDiskSpace = 917.250 GB
Hotspare = NO
Manufacturer = SEAGATE
ProductId = ST1200MM0099
Revision = ST31
SerialNumber = WFK1BNX3
PartNumber = CN0G2G54SGW0087A01RHA00
NegotiatedSpeed = 12.0 Gb/s
ManufacturedDay = 5
ManufacturedWeek = 28
ManufacturedYear = 2018
130
RACADM Subcommand Details