CLI Guide

• To prepare the specified PCIeSSD device for removal, run the following command:
racadm storage preparetoremove: Disk.Bay.8:Enclosure.Internal.0-1:PCIeExtender.Slot.3
STOR089 : Successfully accepted the storage configuration operation.
To apply the configuration operation, create a configuration job with --realtime option.
To create the required commit jobs, run the jobqueue command.
For more information about the jobqueue command, enter the RACADM command "racadm help
jobqueue”
• To perform a cryptographic erase operation on the specified PCIeSSD device, run the following command:
racadm storage secureerase: Disk.Bay.8:Enclosure.Internal.0-1:PCIeExtender.Slot.3
RAC1040 : Successfully accepted the storage configuration operation.
To apply the configuration operation, create a configuration job, and then restart the
server.
To create the required commit and reboot jobs, run the jobqueue command.
For more information about the jobqueue command, enter the RACADM command "racadm help
jobqueue”
• To perform a cryptographic erase operation on SED (self-encrypting drive) device, run the following command:
racadm storage cryptographicerase:<SED FQDD>
SupportAssist
Table 97. Details of SupportAssist
Description Allows you to perform SupportAssist operations such as:
• collect : Collects the SupportAssist data and exports to local share, or remote share, or Dell site depending
on the parameters given in the command. You can specify the type of the logs to be in the collect command. To
run this command, user must accept the End User License Agreement (EULA).
• register : Allows registration of SupportAssist to enable related features.
• exportlastcollection : Exports the last collected SupportAssist data to the share which is mentioned in
the command or to the default share. Default share can be configured using the SupportAssist attributes.
• accepteula : Accepts the End User License Agreement (EULA).
• geteulastatus: Provides the status of the End User License Agreement (EULA).
• uploadlastcollection : Upload last collection to Dell SupportAssist server.
• exposeisminstallertohostos: Exposes iSM installer to host OS, so that user can install the iSM from
host side.
• autocollectscheduler: Provides options to create view, and clear the time-based automatic collections.
User must perform registration for this feature.
NOTE: All the commands except accepteula,geteulastatus , and autocollectscheduler
will create job ID to track the progress of the operation.
Synopsis
• To perform SupportAssist operation by specifying the type of the operation.
racadm supportassist <support assist command type>
• To collect the data and store it in the iDRAC.
racadm supportassist collect –t <logtype>
• To collect the data and export to network share
racadm supportassist collect –t <logtype> -l <CIFS/NFS/TFTP/FTP/HTTP/HTTPS
share> -u <username> -p <password>
• To collect the data and upload to Dell SupportAssist server.
racadm supportassist collect –t <logtype> -upload
136 RACADM Subcommand Details