CLI Guide

Legal Values
String from 0 to 63 characters.
Default
<blank>
cfgRhostsSyslogServer3 (Read or Write)
Table 140. Details of cfgRhostsSyslogServer3
Description
To store the RAC and SEL logs specify the third of three possible remote syslog servers. This property is only valid if
cfgRhostsSyslogEnable is set to 1(enabled).
Legal Values
String from 0 to 63 characters.
Default
<blank>
cfgUserAdmin
This group provides configuration information about the users allowed to access iDRAC through the available remote interfaces.
Up to 16 instances of the user group are allowed. Each instance represents the configuration for an individual user.
Use this object with the config or getconfig subcommands. To use the command as follows: -i <index group>, supply an index
group number
The following sections provide information about the objects in the cfgUserAdmin group.
cfgUserAdminIndex (Read Only)
Table 141. Details of cfgUserAdminIndex
Description The unique index of a user.
Legal Values
This parameter is populated based on the existing instances.
Default
<index of the instance>
cfgUserAdminIpmiLanPrivilege (Read or Write)
Table 142. Details of cfgUserAdminIpmiLanPrivilege
Description The maximum privilege on the IPMI LAN channel.
Legal Values
• 2(User)
• 3(Operator)
• 4(Administrator)
• 15(No access)
Default
• 4(User 2)
• 15(All others)
cfgUserAdminIpmiSerialPrivilege (Read or Write)
Table 143. Details of cfgUserAdminIpmiSerialPrivilege
Description The maximum privilege on the IPMI LAN channel.
This object is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC Enterprise on Blade Servers.
iDRAC Property Database Group and Object Descriptions 165