CLI Guide

• For iDRAC Enterprise on Blade Servers: Session timed out. Closing the session.
After the message is displayed, the system returns you to the shell that generated the Telnet session.
Legal Values
• 0 (No timeout)
• 60–10800
NOTE: If 0 (no timeout is specified), the network connection does not send alive packets to
probe the client. Otherwise, keep alive packets are sent to guarantee that the client is
responding.
Default
• For iDRAC on Rack and Tower Servers: 300
• For iDRAC Enterprise on Blade Servers: 1800
cfgSerial
This group contains configuration parameters for the serial configuration. One instance of the group is allowed.
Use this object with the config or getconfig subcommands.
The following sections provide information about the objects in the cfgSerial group.
NOTE: The cfgSerial object group is applicable for iDRAC Enterprise on Blade Servers for only two properties —
cfgSerialTelnetEnable=1 and cfgSerialSshEnable=1.
cfgSerialBaudRate (Read or Write)
Table 161. Details of cfgSerialBaudRate
Description
Sets the baud rate on the serial port.
Legal Values
9600, 19200, 57600, 115200
Default
57600
cfgSerialConsoleEnable (Read or Write)
Table 162. Details of cfgSerialConsoleEnable
Description
Enables or disables the serial console interface.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgSerialConsoleQuitKey (Read or Write)
Table 163. Details of cfgSerialConsoleQuitKey
Description
This key or key combination terminates Virtual Console text for iDRAC when using the console com2 command.
Legal value: ^ follows any alphabet (a-z, A-Z) ^ follows the listed special characters: [ ] \ ^ _
NOTE: The CTRL key is represented by using the ^ (carat) character.
NOTE: The CTRL key does not generate a character by itself, but must be struck simultaneously
with another key to generate a character.
iDRAC Property Database Group and Object Descriptions 171