CLI Guide

Example
$ racadm getconfig -g cfgIPv6LanNetworking
cfgIPv6Enable=1
cfgIPv6AutoConfig=1
cfgIPv6Address=::
cfgIPv6PrefixLength=64
cfgIPv6Gateway=::
cfgIPv6DNSServersFromDHCP6=1
cfgIPv6DNSServer1=::
cfgIPv6DNSServer2=::
If both IPv4 and IPv6 are enabled on the iDRAC, IPv6 DNS servers take priority. The order of preference for DNS servers is:
• cfgIPv6DNSServer1
• cfgIPv6DNSServer2
• cfgDNSServer1
• cfgDNSServer2
cfgIPv6URL
This group specifies properties used to configure iDRAC IPv6 URL.
The following sections provide information about the objects in the cfgIPv6URL group.
cfgIPv6URLstring (Read Only)
Table 338. Details of cfgIPv6URLstring
Description
The iDRAC IPv6 URL.
Legal Values
A string of up to 80 characters.
Default
<blank>
cfgIpmiSerial
This group specifies properties used to configure the IPMI serial interface of the BMC.
It is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC Enterprise on Blade Servers.
cfgIpmiSerialBaudRate (Read or Write)
Table 339. Details of cfgIpmiSerialBaudRate
Description
Specifies the baud rate for a serial connection over IPMI.
Legal Values
9600, 19200, 57600, 115200
214 iDRAC Property Database Group and Object Descriptions