CLI Guide

cfgNetTuningNicAutoneg (Read or Write)
Table 351. Details of cfgNetTuningNicAutoneg
Description
Enables auto negotiation of physical link speed and duplex. If enabled, auto negotiation takes priority over other
values set in this group.
Legal Values
• 0 = Auto Negotiation is Disabled
• 1 = Auto Negotiation is Enabled
Default
1
Example
racadm getconfig -g cfgNetTuning
cfgNetTuningNicSpeed=100
cfgNetTuningNicFullDuplex=1
cfgNetTuningNicMtu=1500
cfgNetTuningNicAutoneg=1
cfgNetTuningNic100MB (Read or Write)
Table 352. Details of cfgNetTuningNic100MB
Description
Specifies the speed for iDRAC NIC.
NOTE: To set this property:
• iDRAC NIC selection must be set to Dedicated mode.
• iDRAC NIC Auto negotiation must be disabled.
• iDRAC IPv4 must be enabled.
• iDRAC IPv4 DHCP must be enabled.
• iDRAC IPv6 must be enabled.
• iDRAC IPv6 auto configuration must be enabled.
Legal Values
• 0 (10 MBit)
• 1 (100 MBit)
• 2 (1000 MBit)
NOTE: You cannot manually set the Network Speed to 1000 MBit. This option is available only if
cfgNetTuningNicAutoNeg is set to 1 (Enabled).
Default
1
cfgNetTuningNicFullDuplex (Read or Write)
Table 353. Details of cfgNetTuningNicFullDuplex
Description
Specifies the duplex setting for the NIC.
Legal Values
• 0 (Half Duplex)
• 1 (Full Duplex)
Default
1
Dependency
None
218 iDRAC Property Database Group and Object Descriptions