CLI Guide

NOTE: If BootMode is set to UEFI, legacy boot settings are not available in the system. Similarly, if
BootMode is set to Legacy BIOS, UEFI settings are not available in the system.
BIOS.BiosBootSettings.BootMode (Read or Write)
Table 843. The details of BIOS.BiosBootSettings.BootMode attribute
Description
Determines the start mode of the system.
Legal Values
• BIOS
• UEFI
Default Value Not Applicable
Write Privilege
Server Control
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
BIOS.BiosBootSettings.BootSeqRetry (Read or Write)
Table 844. The details of BIOS.BiosBootSettings.BootSeqRetry attribute
Description
Enables or disables the boot sequence retry feature.
Legal Values
Enabled
Disabled
Default Value Not Applicable
Write Privilege
Server Control
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
BIOS.BiosBootSettings.HddFailover (Read or Write)
Table 845. The details of BIOS.BiosBootSettings.HddFailover attribute
Description Specifies the devices in the Hard-Disk Drive Sequence menu that are attempted in the boot sequence. This
property applies to BIOS Boot Mode only, and is disabled when Boot Mode is set to UEFI. When set to Disabled
(default), only the first Hard-Disk device in the list is attempted to boot. When set to Enabled, all Hard-Disk
devices are attempted in order, as listed in the Hard-Disk Drive Sequence.
Legal Values
• Enabled
• Disabled
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
386 Database Objects With Get and Set Commands