CLI Guide

• & (ampersand)

• > (greater than)

• < (less than)

• # (pound)

• ASCII code 32 (space)

There are different escaping rules for double quotation marks.

For using double quotation marks:

The following characters must be escaped by prepending a backward slash:

• $ (dollar sign)

• " (double quotation marks)

• ` (back quotation marks)

help and help subcommand

Table 3. help and help subcommand

Description

Lists all the subcommands available for use with RACADM and provides a short description about each

subcommand. You may also type a subcommand, group, object or Fully Qualified Descriptor (FQDD) name after

help.

Synopsis

• racadm help

• racadm help <subcommand>

Input

• <subcommand> — specifies the subcommand for which you need the help information.

• <device name> — specifies the device name such as iDRAC, BIOS, NIC, LifecycleController, FC, system, or

Storage.

• <group> — specifies the group name supported by the corresponding device.

• <object> — specifies the object for the entered group.

Output

• The help command displays a complete list of subcommands.

• The racadm help <subcommand> command displays information for the specified subcommand only.

• The racadm help <device name> <Group> command displays information for the specified group.

• The racadm help <device name> <Group> <Object> command displays information for the

specified object.

arp

Table 4. Details of arp sub command

Description

Displays the contents of the Address Resolution Protocol (ARP) table. ARP table entries cannot be added or

deleted.

To use this subcommand, you must have Debug privilege.

Synopsis

racadm arp

Input N/A

Example

racadm arp

Output

RACADM Subcommand Details