CLI Guide

• -wom — Specifies the week of month to schedule an autoupdate. Valid values are 1–4, L (Last week) or '*'
(default — any week).
• -dow — Specifies the day of week to schedule an autoupdate. Valid values are sun, mon, tue, wed, thu, fri,
sat, or '*' (default — any day).
NOTE: The -dom, -wom, or -dow option must be included in the command for the autoupdate
schedule. The * value for the options must be included within ' ' (single quotation mark).
• If the -dom option is specified, then the -wom and -dow options are not required.
• If the-wom option is specified, then the-dow is required and -dom is not required.
• If the-dom option is non-'*', then the schedule repeats by month.
•
If the-wom option is non-'*', then the schedule repeats by month.
• If the-dom and -wom options are '*' and the -dow option is non-'*', then the schedule repeats
by week.
• If all the three -dom, -wom and -dow options are '*', then the schedule repeats by day.
• -rp — Specifies the repeat parameter. This parameter must be specified.
• If the-dom option is specified, then the valid values for -rp are 1–12.
• If the-wom option is specified, then the valid values for -rp are 1–52.
• If the-dow option is specified, then the valid values for -rp are 1–366.
• -a — Applies reboot (1 — Yes, 0 — No). This option must be specified.
Example Usage examples:
• To configure autoupdate feature settings.
• For CIFS, run the command:
racadm autoupdatescheduler create -u domain/admin -p xxx -l //1.2.3.4/
share -f cat.xml -time 14:30 -wom 1 -dow sun -rp 1 -a 1
• For NFS, run the command:
racadm autoupdatescheduler create -u nfsadmin -p nfspwd -l 1.2.3.4:/
share -f cat.xml -time 14:30 -dom 1 -rp 5 -a 1
• For FTP, run the command:
racadm autoupdatescheduler create -u ftpuser -p ftppwd -l ftp.test.com -f
cat.xml.gz -ph 10.20.30.40 -pu padmin -pp ppwd -po 8080 -pt http -time
14:30 -dom 1 -rp 5 -a 1
• For HTTP, run the command:
racadm autoupdatescheduler create -u httpuser -p httppwd -l http://
test.com -f cat.xml -ph 10.20.30.40 -pu padmin -pp ppwd -po 8080 -pt
http -time 14:30 -dom 1 -rp 5 -a 1
• For TFTP, run the command:
racadm autoupdatescheduler create -l tftp://1.2.3.4 -f cat.xml.gz -
time 14:30 -dom 1
-rp 5 -a 1
• To view AutoUpdateScheduler parameter:
racadm autoupdatescheduler view
hostname = 192.168.0
sharename = nfs
sharetype = nfs
catalogname = Catlog.xml
time = 14:30dayofmonth =1
repeat = 5
applyreboot = 1
idracuser = racuser
RACADM Subcommand Details
45