CLI Guide

BIOS.SysSecurity.SHA256SystemPassword (Read or
Write)
Table 1067. Details of BIOS.SysSecurity.SHA256SystemPassword attribute
Description Indicates the SHA256 hash of the system password.
Legal Values String of 64 characters
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency None
BIOS.SysSecurity.SysPassword (Read or Write)
Table 1068. Details of BIOS.SysSecurity.SysPassword attribute
Description
Provides the system password. Optional parameter –o <string> is used with this object to provide old password
as an authentication for changing the previously configured password to the new password.
The password can include the following:
• Up to 32 characters including whitespace.
• Contain numbers 0 through 9.
• Only lower case alphabets are accepted.
• Special characters accepted are +, ", ,, -, ., /, ;, [, \, ], `.
To enable password modification, J_EN_PASSWD must be installed.
To clear the already configured password, use the option available under F2 (system setup) during system start.
Legal Values
String of up to 22 characters
Default Value Not Applicable
Write Privilege
Server Control
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
BIOS.SysSecurity.SHA256SystemPasswordSalt (Read or
Write)
Table 1069. Details of BIOS.SysSecurity.SHA256SystemPasswordSalt attribute
Description Indicates the Salt string added to the system password before hash.
Legal Values String of 32 characters
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency None
Database Objects With Get and Set Commands 455