CLI Guide

NIC.IscsiSecondTgtParams.SecondTgtIpVer (Read or
Write)
Table 1210. NIC.IscsiSecondTgtParams.SecondTgtIpVer
Description
Specifies whether or not IPv4 or IPv4 network address is used for the second iSCSI target.
Legal Values
• IPv4
• IPv6
Default Value IPv4
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.IscsiSecondTgtParams.SecondTgtIscsiName (Read or
Write)
Table 1211. NIC.IscsiSecondTgtParams.SecondTgtIscsiName
Description
Specifies the iSCSI Qualified Name (IQN) of the second iSCSI storage target.
Legal Values
String of up to 223 characters
NOTE: The legal value range may be smaller than the maximum size of 223, based on the vendor
configuration of the NIC cards.
Default Value Not Applicable
Write Privilege
Server Control
License Required
iDRAC Express or iDRAC Enterprise
Dependency
Not available if VndrConfigGroup.iSCSIBootSupport is unavailable.
NIC.IscsiSecondTgtParams.SecondTgtTcpPort (Read or
Write)
Table 1212. NIC.IscsiSecondTgtParams.SecondTgtTcpPort
Description
Specifies the TCP Port number of the second iSCSI target.
Legal Values
Values: 1–65535
Default Value Not Applicable
Write Privilege
Server Control
License Required
iDRAC Express or iDRAC Enterprise
Dependency
Not available if VndrConfigGroup.iSCSIBootSupport is unavailable.
NIC.NICConfig
To configure the NICConfig properties, use the objects in this group.
498
Database Objects With Get and Set Commands