CLI Guide

FW Update Method iDRAC on Blade Servers iDRAC on Rack and Tower Servers
Remote RACADM-FTP Yes Yes
Firmware RACADM-TFTP Yes Yes
Firmware RACADM-FTP Yes Yes
get
Table 25. Details of get
Description
Displays the value of one or more objects. The get subcommand has two forms.
• Displays the value of a single object.
• Exports the value of multiple objects to a file.
It supports multiple object value exports in two file formats
• JSON format— SCP JSON files can be exported to a network share file.
• INI format—The INI format files can be exported to a local file only.
• Server Configuration Profile XML format-XML format files can be exported to a local/NFS/CIFS/FTP/TFTP
network share.
NOTE: To run the Get sub-command for Server Configuration Profile XML files, use the Lifecycle
Controller version 1.1 or later.
NOTE: Some objects may have a pending value if a Set operation is performed on the object through
a reboot job. To complete the pending operation, schedule the job using a jobqueue command, and
then check for completion of the job using the returned Job ID. For more information, see jobqueue.
Synopsis
Single-object Get
racadm get <FQDD Alias>.<group>
racadm get <FQDD Alias>.<group>.<object>
racadm get <FQDD Alias>.<group>.[<index>].<object>
racadm get <FQDD Alias>.<index>.<group>.<index>.<object>
60 RACADM Subcommand Details