CLI Guide

Output
• LED is blinking
• LED is not-blinking
Example
racadm getled
LED State : Blinking
racadm getled
LED State : Not-Blinking
getniccfg
Table 30. Details of getniccfg
Description
Displays the current and static NIC settings for iDRAC.
Synopsis
racadm getniccfg
Input
Output
The getniccfg subcommand displays an appropriate error message if the operation is not successful.
Otherwise, the output is displayed in the following format:
Table 31. Details of IPV4 settings
IPv4 settings:
NIC Enabled =1
IPv4 Enabled =1
DHCP Enabled =0
IP Address =10.94.227.207
Subnet Mask =255.255.255.0
Gateway =10.94.227.1
IPv6 settings:
IPv6 Enabled =Disabled
DHCP6 Enabled =Enabled
IP Address 1 =::
Gateway =::
Link Local Address =::
IP Address 2 =::
IP Address 3 =::
IP Address 4 =::
IP Address 5 =::
IP Address 6 =::
IP Address 7 =::
IP Address 8 =::
IP Address 9 =::
IP Address 10 =::
IP Address 11 =::
IP Address 12 =::
RACADM Subcommand Details 67