CLI Guide

IP Address 13 =::

IP Address 14 =::

IP Address 15 =::

LOM Status:

NIC Selection =dedicated

Link Detected =Yes

Speed =1Gb/s

Duplex Mode =Full Duplex

Active NIC =Dedicated

Static IPv4 settings:

Static IP Address =10.94.227.207

Static Subnet Mask =255.255.255.0

Static Gateway =10.94.227.1

Static IPv6 settings:

Static IP Address 1 =::

Static Prefix Length =64

Static Gateway =::

NOTE: IPv6 information is displayed only if IPv6 is enabled in iDRAC.

NOTE: IPv6 Address 1 field indicates static IP and IPv6 Address 2 field indicates dynamic IP.

NOTE: LOM Status is displayed only for iDRAC on Rack and Tower servers and is not displayed for

iDRAC Enterprise on Blade servers.

Example

• Display iDRAC network settings in server slot 1

racadm getniccfg

getraclog

Table 32. Details of getraclog

Description

The getraclog command displays RAC log entries.

Synopsis

• racadm getraclog [-i]

• racadm getraclog [-s <start>] [-c <count>]

racadm getraclog [-c <count>] [-s <start-record>]

NOTE: If options are not provided, the entire log is displayed.

Input

• -c — Specifies the number of records to display.

NOTE: On Local RACADM, the number of logs are restricted to 100 by default.

• -s — Specifies the starting record used for the display.

NOTE: When Enhanced Chassis Logging and Events feature is enabled, then -i and --more options

are not displayed.

68 RACADM Subcommand Details