CLI Guide

getremoteservicesstatus
Table 34. Details of getremoteservicesstatus
Description
Displays the status of a system.
Synopsis
racadm getremoteservicesstatus
Input
racadm getremoteservicesstatus
Output
Possible values for the host
system status
• Powered Off
• In POST
• Out of POST
• Collecting System
Inventory
• Automated Task
Execution
• Lifecycle Controller
Unified Server
Configurator
• Server has halted at
F1/F2 error prompt
because of a POST
error
• Server has halted at
F1/F2/F11 prompt
because there are no
bootable devices
available
• Server has entered F2
setup menu
• Server has entered F11
Boot Manager menu
Possible values for the for
LifeCycle controller(LC)
status
• Ready
• Not Initialized
• Reloading data
• Disabled
• In Recovery
• In Use
Possible values for the real
time status
• Ready
• Not ready
Possible values for the
overall status status
• Ready
• Not ready
Example
• racadm getremoteservicesstatus
getsel
Table 35. Details of getsel
Description
Displays all system event log (SEL) entries in iDRAC.
Synopsis
• racadm getsel [-i]
• racadm getsel [-s <start>][-c <count>]
NOTE: If no arguments are specified, the entire log is displayed.
Input
• —i — Displays the number of entries in the SEL.
• -s — Displays the starting record number.
• -c — Specifies the number of records to display.
• --more — Displays a screen.
• -A — Does not display headers or labels.
• -o — Displays each record on a single line..
• -E — Displays RAW SEL data along with the other data.
• -R — Displays only the RAW SEL data for each record
70 RACADM Subcommand Details