CLI Guide

• -c — Specifies the number of records to display.
• -s — Specifies the starting record to display.
Output
The default output display shows the record number, timestamp, source and description. The timestamp begins at
midnight, January 1 and increases until the system starts. After the system starts, the system’s timestamp is used.
Example
• Display entire log
racadm gettracelog
• Display number of records in log
racadm gettracelog -i
Total Records: 228
getversion
Table 55. Details of getversion
Description Displays the current software version, model and generation
information, and whether the target device can be updated.
Synopsis
• racadm getversion
• racadm getversion [-b | -c | —i]
•
racadm getversion [-f <filter>]
Input
• -c — Displays the server's current CPLD version.
• -b — Displays the server's current BIOS version.
• -i — Displays the server's current IDSDM version.
• -f <filter> — Filters the components and must be one of
the following values:
•
bios: BIOS
• idrac: iDRAC
• lc: Lifecycle Controller
• idsdm: SD card
racadm getversion -c
Table 56. Details of
racadm getversion -c
< Server > < CPLD Version > < Blade Type >
server-1 1.0.5 PowerEdgeM520
server-2 1.0.3 PowerEdgeM610x
server-4 1.0.0 PowerEdgeM710HD
server-5 1.0.3 PowerEdgeM710
server-7 1.0.6 PowerEdgeM620
78 RACADM Subcommand Details