CLI Guide

• Export the log to management station using Remote RACADM.
racadm -r 1.2.3.4 -u user -p xxx inlettemphistory export -f Mylog.csv -t csv
• View the inlet temperature history.
racadm inlettemphistory get
Duration Above Warning Threshold as Percentage = 0.0%
Duration Above Critical Threshold as Percentage = 0.0%
Average Temperatures
Last Hour = 23C ( 73.4F )
Last Day = 24C ( 75.2F )
Last Week = 24C ( 77.0F )
Last Month = 25C ( 77.0F )
Last Year = 23C ( 73.4F )
Peak Temperatures
Last Hour = 23C ( 73.4F ) [At Wed, 21 May 2017 11:00:57]
Last Day = 25C ( 77.0F ) [At Tue, 21 May 2017 15:37:23]
Last Week = 27C ( 80.6F ) [At Fri, 20 May 2017 10:38:20]
Last Month = 29C ( 84.2F ) [At Wed, 16 May 2017 15:34:13]
Last Year = 29C ( 84.2F ) [At Wed, 16 May 2017 15:34:13]
• Configure the proxy parameter.
racadm set lifecyclecontroller.lcattributes.UserProxyUsername admin1
• Remove the the proxy parameter.
racadm set lifecyclecontroller.lcattributes.UserProxyUsername
• View the list of proxy attributes.
racadm get lifecycleController.lcAttributes
jobqueue
Table 64. Details of jobqueue
Description Enables you to view and delete a job or jobs in the current Job Queue.
NOTE:
• To run this subcommand, you must have the Server control privilege.
• If an unexpected error message is displayed for any operation, ensure you delete
some jobs in the jobqueue and retry the operation.
• Use jobqueue create command after applying a pending device configuration. Else,
you may see a job creation and deletion in the lclog.
• Multi-object Set commands using INI, XML, or JSON files do NOT require a
jobqueue create command; jobs will be automatically created by the Set command.
Synopsis
racadm jobqueue view -i<jobid>
racadm jobqueue delete [-i<jobid>][--all]
RACADM Subcommand Details 87