CLI Guide

where valid options are -i and --all.

racadm jobqueue create <fqdd> [-r <reboot type> ] [-s <start

time> ] [-e <expiry time>]

racadm jobqueue create <fqdd> [-r <reboot type>] [-s <start time>]

[-e <expiration time>] [--realtime]

Input

• -i — Specifies a job ID that is displayed or deleted.

NOTE: The value JID_CLEARALL will force delete all the possible jobs in the queue.

• --all — The job IDs that are not applicable are deleted.

• -fqdd — Specifies an FQDD for which a job should be created.

•

—r <reboot type> — Specifies a reboot type.

•

none — No Reboot Job. This option is the default value.

• pwrcycle — Power cycle.

• graceful — Graceful Reboot without forced shut down.

• forced — Graceful Reboot with forced shut down.

• start time — Specifies a start time for job scheduled in the yyyymmddhhmmss format.

TIME_NOW means immediate. Next Reboot means job is in scheduled state until the next

manual restart.

• expiry time — Specifies expiry time for the job execution in the yyyymmddhhmmss format.

The job must start by this time. TIME_NA means expiry time is not applicable.

• --realtime — Specifies the real time job.

NOTE:

• --realtime is applicable for storage configuration commands run on systems

with PERC 9 cards with firmware version 9.1 and later.

• -r option is not valid for real time configuration.

Example

• View jobs in the current job queue.

racadm jobqueue view

• View status of a specific job ID.

racadm jobqueue view -i <JobID>

• Issue configuration changes for a PERC controller then start a real time job to execute the

changes.

racadm set RAID.Slot.3-1.RAIDdefaultWritePolicy WriteBack

racadm set RAID.Slot.3-1.Name “Prod Workload”

racadm jobqueue create RAID.Slot.3-1 –realtime

• Delete all possible jobs from the current job queue.

racadm jobqueue delete --all

• Delete a specific job from the current job queue.

racadm jobqueue delete -i <JobID>

• To clear all the jobs in the job queue.

racadm jobqueue delete –i JID_CLEARALL

• Create a Job for the provided FQDD and add to the job queue.

racadm jobqueue create NIC.Integrated.1-1 -r pwrcycle -s

TIME_NOW -e 20120501100000

RACADM Subcommand Details