Owner's manual

ManualsBrandsDell ManualsComputer HardwarePowerEdge T430

Statement of Volatility – Dell PowerEdge T430

Dell PowerEdge T430 contains both volatile and non-volatile (NV) components. Volatile components lose their data

immediately upon removal of power from the component. Non-volatile components continue to retain their data even

after the power has been removed from the component. Components chosen as user-definable configuration options

(those not soldered to the motherboard) are not included in the Statement of Volatility. Configuration option information

(pertinent to options such as microprocessors, remote access controllers, and storage controllers) is available by

component separately. The following NV components are present in the PowerEdge T430 server.

Item

Non-Volatile or

Volatile

Quantity Reference Designator Size

Planer

PCH Internal CMOS

RAM

Non-Volatile 1

U_PCH1

256 Bytes

BIOS Password Non-Volatile 1

U_PCH1

16 bytes

BIOS SPI Flash Non-Volatile 1

U_SPI_BIOS1

16 MB

iDRAC SPI Flash Non-Volatile 1

U_IDRAC_SPI-1

4 MB

BMC EMMC Non-Volatile 1

U_EMMC1

4 GB

System CPLD RAM Volatile 1 U_CPLD1 1 KB

System Memory Volatile

Up to 8

for CPU1

Up to 4

for CPU2

CPU1: DIMM1~DIMM8,

CPU2: DIMM9~DIMM12

Up to 32GB per DIMM

(RDIMM)

Internal USB Key Non-Volatile Up to 1 N/A

Varies (not factory

installed)

CPU Volatile

1 or 2

CPU1 / CPU2

Various

iDRAC DDR Volatile

U_IDRAC_MEM1 256MByte

iDRAC Volatile

U_IDRAC1

64 kbyte + registers

LOM EEPROM Non-Volatile

U_LOM1_ROM

8Mb

Power Supplies

PSU FW

Non-Volatile 1 per PSU Varies by part number

Up to 2MB. Varies by part

number

02 - 2013

Summary of content (9 pages)

PAGE 1
Statement of Volatility – Dell PowerEdge T430 Dell PowerEdge T430 contains both volatile and non-volatile (NV) components. Volatile components lose their data immediately upon removal of power from the component. Non-volatile components continue to retain their data even after the power has been removed from the component. Components chosen as user-definable configuration options (those not soldered to the motherboard) are not included in the Statement of Volatility.
PAGE 2
Item Non-Volatile or Volatile Quantity Reference Designator Size Non-Volatile 1 U_SF1 Flash:32KB+4KB EEPROM: 2KB 5U 8x3.5”Backplane SEP internal flash 5U 16x2.
PAGE 3
Item Non-Volatile or Volatile Flash Non-volatile SPI Flash MCU Quantity Reference Designator Size 1 U3 16MB Non-Volatile 1 U2 8Mb Non-Volatile 1 U6 512KB Non-Volatile 1 U_TPM 128 Bytes IDSDM TPM Trusted Platform Module (TPM) Item Type (e.g. Flash PROM, EEPROM) Can user programs or operating system write data to it during normal operation? Purpose? (e.g.
PAGE 4
Item Type (e.g. Flash PROM, EEPROM) Can user programs or operating system write data to it during normal operation? Purpose? (e.g.
PAGE 5
Item Type (e.g. Flash PROM, EEPROM) Can user programs or operating system write data to it during normal operation? Purpose? (e.g.
PAGE 6
Item Type (e.g. Flash PROM, EEPROM) Can user programs or operating system write data to it during normal operation? Purpose? (e.g.
PAGE 7
System CPLD RAM Not utilized Not accessible Not accessible System Memory System OS OS Control Reboot or power down system Internal USB Key USB interface via PCH.
PAGE 8
production available to the customer 1-Wire EEPROM ROC writes data to this memory Not WP. Not visible to Host Processor Cannot be cleared with existing tools available to the customer SBR Pre-programmed before assembly Not WP. Not visible to Host Processor Cannot be cleared with existing tools available to the customer Flash Pre-programmed before assembly. Can be updated using Dell/LSI tools Not WP.
PAGE 9
memory Host Processor available to the customer SBR Pre-programmed before assembly Not WP. Not visible to Host Processor Cannot be cleared with existing tools available to the customer Flash Pre-programmed before assembly. Can be updated using Dell/LSI tools Not WP. Not visible to Host Processor Cannot be cleared with existing tools available to the customer SPI Flash SPI interface via iDRAC Hardware strapping Not user clearable MCU USB3.