Specifications

16
Intel® Cloud Builders Guide: Dell* OpenManage* Power Center
6. You have now added an IPMI Protocol Scanning Profile to Power Center (as shown below) which can be re-used for future IP
subnet scans on the same, or other subnets.
7. You are now back at the Device Discovery Summary Page, if your data is setup correctly you can click Search to commence your
subnet scan for iDRAC devices.
8. During the scanning process, you will notice the systems that are discovered will be counted on the screen. This process may take
a few minutes depending on the size of your subnet and the number of servers found on the subnet.