Dell EMC PowerEdge RAID 컨트롤러 S140 사용자 가이드 December 2020 개정 A11
참고, 주의 및 경고 노트: 참고"는 제품을 보다 효율적으로 사용하는 데 도움이 되는 중요 정보를 제공합니다. 주의: 주의사항은 하드웨어의 손상 또는 데이터 유실 위험을 설명하며, 이러한 문제를 방지할 수 있는 방법을 알려줍니다. 경고: 경고는 재산 손실, 신체적 상해 또는 사망 위험이 있음을 알려줍니다. © 2017-2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC 및 기타 상표는 Dell Inc. 또는 그 자회사의 상표입니다. 다른 상표는 해당 소유자의 상표일 수 있습니다.
목차 장 1: 개요........................................................................................................................................ 7 PERC S140 사양.................................................................................................................................................................... 7 지원되는 운영 체제..............................................................................................................................................................
핫 스페어 디스크 관리...................................................................................................................................................... 24 전역 핫 스페어 디스크 할당....................................................................................................................................... 24 전용 핫 스페어 디스크 할당....................................................................................................................................... 24 핫 스페어 디스크 할당 취소.......................
SATA 물리 디스크 쓰기 캐시 정책을 비활성화한 후 성능이 저하됨........................................................................42 UEFI 또는 OPROM의 모든 기능 설정을 수정할 수 없음.............................................................................................43 OS 설치 중 추가 재부팅.................................................................................................................................................... 43 하이퍼바이저를 활성화한 후 시스템이 블루 스크린을 표시함..........................................................................
장 9: 도움말 얻기........................................................................................................................... 54 Dell에 문의하기...................................................................................................................................................................54 시스템 서비스 태그 찾기.................................................................................................................................................. 54 관련 설명서.............................
1 개요 Dell EMC PERC(PowerEdge RAID Controller) S140은 Dell EMC PowerEdge 시스템의 소프트웨어 RAID 솔루션입니다. S140 컨트롤러는 시스템 백플레인 구성에 따라 최대 30개의 NVMe(Non-Volatile Memory express) PCIe SSD, SATA SSD, SATA HDD를 지원합니다. 주제: • • • • • PERC S140 사양 지원되는 운영 체제 지원되는 PowerEdge 시스템 지원되는 물리적 디스크 PERC S140 관리 애플리케이션 PERC S140 사양 다음 표에는 SATA 및 NVMe PCIe SSD에 대한 PERC S140 사양이 나와 있습니다. 노트: 사양은 시스템 모델에 따라 다릅니다. 표 1.
표 2. PERC S140의 SATA 사양 (계속) 사양 PERC S140 Windows RAID: 볼륨, RAID 1, RAID 0, RAID 5, RAID 10 SATA 드라이브의 소프트웨어 기반 RAID Linux RAID: RAID 1 노트: RAID-1 디스크에 설치된 Linux OS에서 지원되는 모든 RAID 레벨의 부팅되지 않는 가상 디스크를 기본 Linux RAID 유틸리 티를 사용하여 생성할 수도 있습니다. 패스 스루 SSD 지원 예 표 3. PERC S140의 NVMe 사양 사양 PERC S140 지원되는 최대 네임스페이스 수 1 노트: 네임스페이스가 2개 이상인 드라이브가 연결되어 있는 경우 드라이브가 오프라인으로 표시되며 액세스할 수 없습니다. NVMe 커넥터 PCIe/Slimline 노트: Dell 호환 NVMe PCIe SSD 2.5인치 SFF(Small Form Factor) 또는 NVMe PCIe SSD 어댑터만 지원됩니다.
표 4. SATA 구성을 사용하는 PERC S140의 가상 디스크 사양 (계속) 사양 PERC S140 1개 볼륨 내 물리적 디스크의 최소 수 1 RAID 0에서 물리적 디스크의 최소 수 2 RAID 1에서 물리적 디스크의 최소 수 2 RAID 5에서 물리적 디스크의 최소 수 3 RAID 10에서 물리적 디스크의 최소 수 4 노트: 위의 표에 나열된 구성은 해당 시스템의 하드 드라이브 백플레인에 따라 다를 수 있습니다. 표 5. NVMe 구성을 사용하는 PERC S140의 가상 디스크 사양 사양 PERC S140 지원되는 물리적 디스크의 최대 수 30 지원되는 가상 디스크의 최대 수 30 노트: 다음과 같은 경우 가상 디스크의 최대 수는 30개를 초과할 수 있습니다.
● Linux ○ Red Hat Enterprise Linux 7.3 이상 ○ SUSE Linux Enterprise Server 버전 12 SP2 이상 노트: S140은 Linux MDRAID를 활성화하기 위한 구성 유틸리티 기능을 사전 부팅하는 경우에만 Linux를 지원합니다. 자세 한 내용은 Linux RAID를 참조하십시오. 노트: 지원되는 운영 체제 목록과 드라이버 설치 지침에 대한 자세한 내용은 https://www.dell.com/operatingsystemmanuals에서 시스템 문서 자료를 참조하십시오. 특정 운영 체제 서비스 팩 요구 사항은 www.dell.com/support/drivers을(를) 참조하십시오. 지원되는 PowerEdge 시스템 다음 PowerEdge 시스템은 S140 컨트롤러를 지원합니다.
PERC S140 관리 애플리케이션 관리 애플리케이션을 사용하면 RAID 서브시스템을 관리 및 구성하고 다중 디스크 그룹을 생성 및 관리할 수 있을 뿐만 아니라 다중 RAID 시스템을 제어 및 모니터링하고 온라인 유지 보수를 수행할 수 있습니다. PERC S140용 관리 애플리케이션은 다음을 포함합니 다. ● BIOS 구성 유틸리티 - +이라고도 부르며, RAID 디스크 그룹 및 가상 디스크를 구성하고 유지 관리하는 스토리지 관리 애 플리케이션입니다. BIOS 구성 유틸리티 페이지 21를 참조하십시오. ● UEFI(Unified Extensible Firmware Interface) RAID 구성 유틸리티. 이 스토리지 관리 애플리케이션은 키를 통해 액세스할 수 있는 시스템 BIOS에 통합되어 있습니다. UEFI RAID 구성 유틸리티 페이지 27를 참조하십시오. NVMe PCIe SSD의 RAID 구성은 UEFI RAID 구성 유틸리티를 통해서만 지원됩니다.
2 물리 디스크 노트: 가상 디스크의 물리적 디스크는 드라이브 유형(HDD, SSD 또는 NVMe PCIe SSD)가 같아야 합니다. 예를 들어, 같은 가상 디 스크에 HDD와 NVMe PCIe SSD를 함께 사용할 수 없습니다. 노트: 드라이브 작동 LED는 디스크에서 실행 중인 백그라운드 작업이 있는 동안 지속적으로 깜박입니다. 주제: • 물리 디스크 기능 물리 디스크 기능 물리 디스크 로밍 물리 디스크 로밍은 동일한 컨트롤러에서 한 케이블 연결 또는 후면판 슬롯 간에 물리 디스크를 이동합니다. 컨트롤러는 재배치된 물 리 디스크를 자동으로 인식하고 디스크 그룹에 속하는 가상 디스크에 논리적으로 배치합니다. 시스템이 꺼진 경우에만 디스크 로밍 을 수행할 수 있습니다. 주의: OCE(온라인 용량 확장) 중에는 디스크 로밍을 시도하지 마십시오. 시도할 경우 가상 디스크의 유실을 초래할 수 있습니 다.
미러링 재구축 RAID 미러링 구성은 새 물리 디스크를 삽입하고 물리 디스크를 핫 스페어로 지정한 후에 재구축할 수 있습니다. 노트: 시스템을 재부팅할 필요가 없습니다. 내결함성 PERC S140에서는 다음 내결함성 기능을 사용할 수 있습니다. ● 물리 디스크 오류 감지(자동) ● 핫 스페어를 이용한 가상 디스크 재구축(이 기능에 대한 핫 스페어가 구성되어 있는 경우 자동) ● 패리티 생성 및 검사(RAID 5만 해당) ● 시스템 재부팅 없이 물리 디스크 핫 스왑 수동 교체(핫 스왑 가능 후면판 장착 시스템만 해당) RAID 1(미러링)의 한 쪽에 오류가 발생한 경우 미러링 다른 쪽의 물리 디스크를 이용해 데이터를 재구축할 수 있습니다. RAID 5의 물리 디스크에 오류가 발생한 경우 패리티 데이터는 나머지 물리 디스크에 존재하며, 이를 사용하여 핫 스페어로 구성된 새 로운 교체용 물리 디스크로 데이터를 복원할 수 있습니다.
노트: UEFI 또는 사전 부팅 모드에서는 NVMe PCle SSD의 핫 제거 또는 핫 삽입이 지원되지 않습니다. 운영 체제 환경에서는 2개 이상의 NVMe PCIe SSD를 동시에 핫 스왑하는 기능이 지원되지 않습니다. 노트: 가상 디스크 내에서 SATA 드라이브와 NVMe PCle SSD를 혼합하여 사용할 수는 없습니다. 노트: 사전 부팅 중 NVMe PCle SSD를 구성하려면 S140 UEFI 구성 유틸리티만을 사용해야 합니다. 노트: UEFI HII 모드에서 디바이스 설정 페이지의 NVMe PCIe SSD 옵션을 사용하여 NVMe 물리적 디스크 속성을 보고 점멸/점멸 해제 작업을 수행할 수 있습니다. 노트: NVMe 가상 디스크에서의 RAID 구성 및 부팅은 UEFI 부팅 모드에서만 지원됩니다. 노트: OPROM(Option ROM)을 사용하는 RAID 구성은 NVMe PCIe SSD를 포함하는 시스템에서 지원되지 않습니다.
3 가상 디스크 PERC S140에 연결된 물리적 디스크의 논리적 그룹화는 최대 30개의 가상 디스크를 초과하지 않고 동일한 RAID 수준의 가상 디스크 를 여러 개 생성할 수 있도록 허용합니다. PERC S140 컨트롤러를 사용하여 다음을 수행할 수 있습니다. ● S140 컨트롤러에 다른 RAID 수준의 가상 디스크 생성. 노트: 동일한 물리적 디스크에서 서로 다른 RAID 수준을 함께 사용하지 마십시오. ● 서로 다른 응용 프로그램용으로 서로 다른 특징을 가지는 서로 다른 물리적 디스크 구축. ● NVMe PCIe SSD 2.5" SFF 및 NVMe PCIe SSD 어댑터를 혼합하여 가상 디스크 생성. PERC S140 컨트롤러는 다음을 허용하지 않습니다. ● 여러 종류의 물리적 디스크를 혼합하여 가상 디스크 생성. 예를 들어 RAID 10 가상 디스크는 2개의 SATA HDD 물리적 디스크와 1 개의 SATA SSD 물리적 디스크로 생성될 수 없습니다.
디스크 초기화 물리 디스크의 경우 초기화는 컨트롤러에서 물리 디스크를 사용할 수 있도록 물리 디스크에 메타데이터를 기록합니다. 배경 어레이 검색 가상 디스크에 대한 미러, 볼륨 또는 패리티 데이터에서 수정 가능한 미디어 오류를 확인하고 수정합니다. Windows 운영 체제에서 가 상 디스크가 생성된 후 BAS(Background Array Scan)가 자동으로 시작됩니다. Checkpointing(체크포인팅) 다시 시작 후 마지막 지점에서 다양한 유형의 체크포인팅이 다시 시작될 수 있습니다. 시스템이 재시작된 후 백그라운드 체크포인팅 이 가장 최근 체크포인트에서 다시 시작됩니다. 다음 세 가지 유형의 체크포인팅을 사용할 수 있습니다. ● 일관성 검사(CC) ● BGI(Background Initialization) ● 재구축 일관성 검사 일관성 검사(CC)는 내결함성 물리 디스크의 미러 또는 패리티 데이터를 확인하고 수정하는 배경 작업입니다.
● Read Ahead(미리 읽기)/Write Through(연속 기입) ● No Read Ahead(미리 읽기 사용 안 함)/Write Through(연속 기입) 표 6. PERC S140에 대한 읽기, 쓰기 및 캐시 정책 범주 S140 컨트롤러에서 지원함 Cache Settings(캐시 설정) 예 Read Ahead(미리 읽기)/Write Back(후기입) 예 No Read Ahead(미리 읽기 사용 안 함)/Write Back(후기입) 예 Read Ahead(미리 읽기)/Write Through(연속 기입) 예 No Read Ahead(미리 읽기 사용 안 함)/Write Through(연속 기입) 예 노트: Write-Cache(캐시 기록) 모드 활성화에 대한 현재의 기본값은 Write Through(연속 기입)(WT), No Read Ahead(미리 읽 기 사용 안 함)(NRA)입니다. Write Back(후기입)(WB)을 활성화하려면 UPS가 권장됩니다.
물리 디스크가 추가(시스템에 핫 스왑 기능이 있는 경우)되는 동안과 가상 디스크의 데이터가 재분배되는 동안 데이터에 액세스할 수 있습니다. 볼륨, RAID 1 및 RAID 10의 경우, OCE/재구성은 가상 디스크에 포함된 물리 디스크의 사용 가능한 공간을 사용해 가상 디스크를 확장 합니다. RAID 0 및 RAID 5의 경우, 물리 디스크를 가상 디스크에 추가해 추가 용량을 확보할 수 있습니다.
4 S140 드라이브를 케이블로 연결 주의: 대부분의 수리는 인증받은 서비스 기술자가 수행해야 합니다. 문제 해결이나 간단한 수리에 한해 제품 문서에 승인된 대로 또는 온라인/전화 서비스 및 지원팀이 안내하는 대로 사용자가 직접 처리할 수 있습니다. Dell의 승인을 받지 않은 서비스 작업으 로 인한 손상에 대해서는 보상을 받을 수 없습니다. 제품과 함께 제공된 안전 지침을 읽고 따르십시오. 노트: 시스템 부품 분리 및 재설치에 관한 내용은 dell.com/poweredgemanuals에서 PowerEdge 소유자 매뉴얼을 참조하십시오. 이 항목은 내장형 PERC S140 컨트롤러의 케이블 연결 정보에 대한 세부 정보를 제공합니다. 노트: S140에서 SATA 및 NVMe PCIe SSD 케이블 연결에 대한 자세한 내용은 dell.com/poweredgemanuals에서 시스템 소유자 매뉴얼을 참조하십시오. 1. 시스템 및 장착된 주변 장치를 끄고 시스템을 콘센트 및 주변 장치에서 분리합니다.
그림 1 . S140 컨트롤러를 케이블로 연결 1. 후면판 2. 시스템 보드 3. 첫 번째 AHCI 장치의 커넥터(J_SATA A) 4. 두 번째 AHCI 장치의 커넥터(J_SATA B) 주제: AHCI 장치의 디스크 연결 • AHCI 장치의 디스크 연결 S140 컨트롤러는 최대 2개의 AHCI 장치를 포함하는 시스템을 지원합니다. AHCI 장치 2개를 포함하는 시스템의 경우 첫 번째 AHCI 장 치는 포트 0-5에서 드라이브를 연결하고 두 번째 AHCI 장치는 포트 6-13에서 드라이브를 연결합니다. 다음 표에서는 PowerEdge 시스템 14세대에서 지원되는 AHCI 장치의 디스크 연결에 대한 정보를 제공합니다. 표 7.
5 BIOS 구성 유틸리티 + 또는 옵션 ROM(OPROM)이라고도 하는 BIOS 구성 유틸리티는 시스템 부팅 동안 키를 사용하여 액세스할 수 있는 시스템 BIOS에 통합된 스토리지 관리 응용프로그램이며, SATA 드라이브의 RAID 디스크 그룹 및 가상 디스크를 구성하고 유지 관리 합니다. BIOS Configuration Utility Ctrl+R)(BIOS 구성 유틸리티(Ctrl + R))는 운영 체제로부터 독립적입니다. 노트: 초기 설정 및 재해 복구를 위해 Ctrl+R을 사용합니다. OpenManage Storage Managemet 응용프로그램을 통해 고급 기능을 사용할 수 있습니다. 노트: NVMe PCIe SSD 구성은 BIOS 구성 유틸리티를 사용하여 지원되지 않습니다. 노트: 사전 부팅 중 NVMe PCle SSD를 구성하려면 S140 UEFI 구성 유틸리티만을 사용해야 합니다.
주의: SATA 컨트롤러가 RAID 모드로 설정되어 있지 않으면 데이터가 삭제될 수 있습니다. 모드를 변경하기 전에 모든 데이 터를 백업해야 합니다. 노트: BIOS Configuration Utility (BIOS 구성 유틸리티 )이 표시되지 않고 시스템이 PERC S140을 사 용하는 경우 키를 눌러 시스템 BIOS에 액세스합니다. SATA Settings(SATA 설정) 필드에서 SATA 컨트롤러가 RAID 모 드로 설정되어 있는지 확인합니다. 설정이 올바른데도 BIOS Configuration Utility (BIOS 구성 유틸리티 )이 표시되지 않는 경우 https://www.dell.com/supportdell.com/support에서 Dell 지원에 문의하십시오. BIOS 구성 유틸리티 종료 1. 임의의 메뉴 화면에서 키를 누릅니다. 선택 항목을 확인하기 위한 대화 상자가 표시됩니다. 2.
6. Enter 키를 누릅니다. 선택한 물리 디스크를 비 RAID 디스크로 전환합니다. 가상 디스크 생성 1. BIOS Configuration Utility(BIOS 구성 유틸리티)를 시작합니다. BIOS 구성 유틸리티 시작 페이지 21을 참조하십시오. 2. Main Menu(주메뉴) 화면에서 Create Virtual Disks(가상 디스크 생성)를 선택하고 키를 누릅니다. 노트: S140 컨트롤러는 물리적 디스크당 최대 30개의 가상 디스크를 지원합니다. 가상 디스크 수가 30개의 최대 한도를 초과 하는 경우, UEFI 또는 OPROM의 기능 설정을 수정할 수 없습니다. 이 문제 해결에 대한 자세한 내용은 UEFI 또는 OPROM의 모든 기능 설정을 수정할 수 없음 페이지 43을 참조하십시오. 3. Physical Disks(물리 디스크) 필드에서 가상 디스크를 생성할 물리 디스크를 선택합니다. a. 물리 디스크를 선택하려면 키를 누릅니다. b.
2개의 가상 디스크 교환 1. BIOS Configuration Utility(BIOS 구성 유틸리티)를 시작합니다. BIOS 구성 유틸리티 시작 페이지 21을 참조하십시오. 2. Main Menu(기본 메뉴) 화면에서 Swapping Two Virtual Disks(2개의 가상 디스크 교환)를 선택하고 키를 누릅니다. 3. 화살표 키를 사용해 Virtual Disk(가상 디스크) 필드에서 가상 디스크를 강조 표시합니다. 키를 누릅니다. 4. 화살표 키를 사용해 다른 가상 디스크를 강조 표시합니다. 키를 누릅니다. 5. 키를 눌러 가상 디스크를 교환합니다. 노트: 한 번에 2개의 가상 디스크만 교환할 수 있습니다.
1. BIOS Configuration Utility(BIOS 구성 유틸리티)를 시작합니다. BIOS 구성 유틸리티 시작 페이지 21을 참조하십시오. 2. Main Menu(주 메뉴) 화면에서 Manage Hot Spare(핫 스페어 관리)를 선택하고 키를 누릅니다. 3. Assign Dedicated Hot Spare(전용 핫 스페어 할당)를 선택하고 Enter 키를 누릅니다. 4. 위쪽 또는 아래쪽 화살표 키를 사용하여 전용 핫 스페어로 사용할 물리 디스크를 선택하고 키를 누릅니다. 5. 키를 눌러 전용 핫 스페어를 추가합니다. 6. 키를 눌러 작업을 확인합니다. 핫 스페어 디스크 할당 취소 1. BIOS Configuration Utility(BIOS 구성 유틸리티)를 시작합니다. BIOS 구성 유틸리티 시작 페이지 21을 참조하십시오. 2.
디스크 재검색 이 옵션을 사용하여 기존 물리 및 가상 디스크 목록을 볼 수 있습니다. 노트: 디스크 재검색 옵션은 시스템에서 사용할 수 있는 디스크 수에 따라 디스크의 목록을 표시하는 데 10~20초 정도 걸릴 수 있 습니다. 1. Dell PERC S140 Configuration Utility(Dell PERC S140 구성 유틸리티)를 시작합니다. DELL PERC S140 구성 유틸리티 시작 페 이지 27을 참조하십시오. 2. Controller Management(컨트롤러 관리) > Rescan Disks(디스크 재검색)를 클릭합니다. Rescan Tasks(작업 재검색) 화면이 표시됩니다. 최신 물리 디스크 및 가상 디스크 구성에 대한 정보를 제공합니다. 컨트롤러 옵션 Controller Options(컨트롤러 옵션) 기능은 BIOS Stop on Error(오류 시 BIOS 중지) 옵션을 활성화할 수 있도록 도와줍니다. Pause if...(일시 정지...
6 UEFI RAID 구성 유틸리티 UEFI(Unified Extensible Firmware Interface) RAID 구성 유틸리티는 시스템 BIOS 에 통합된 스토리지 관리 응용프로그램입니다. RAID, 가상 디스크, 물리 디스크를 구성하고 관리하는 데 사용됩니다. 이 유틸리티는 운영 체제로부터 독립적입니다. 노트: 다음 섹션에서는 UEFI RAID 구성 유틸리티 사용에 대한 정보를 제공합니다. 자세한 내용은 UEFI RAID 구성 유틸리티의 온 라인 도움말 옵션을 참조하십시오. 노트: 사전 부팅 중 NVMe PCle SSD를 구성하려면 S140 UEFI 구성 유틸리티만을 사용해야 합니다. NVMe PCIe SSD에 대해 RAID 모드를 활성화하려면 다음을 참조하십시오. NVMe PCIe SSD를 RAID 모드로 설정 페이지 39 노트: UEFI RAID 구성 유틸리티를 사용하여 초기 설정을 실행하십시오.
그림 2 . Dell PERC S140 구성 유틸리티 DELL PERC S140 구성 유틸리티 종료 유틸리티를 종료하고 시스템 설정 화면으로 돌아가려면 화면 오른쪽 하단 모서리의 Finish(마침)를 클릭합니다. 컨트롤러 관리 컨트롤러 속성 보기 View Controller Information(컨트롤러 정보 보기) 화면에서 컨트롤러 및 펌웨어 속성을 볼 수 있습니다. System Setup Main Menu(시스템 설정 주 메뉴)에서 Device Settings(장치 설정) > Dell PERC S140 Configuration Utility(Dell PERC S140 구성 유틸리티) > Controller Management(컨트롤러 관리) > View Controller Information(컨트롤러 정보 보기)를 클 릭합니다. 다음 표는 View Controller Information(컨트롤러 정보 보기) 화면 세부 사항을 설명합니다. 표 10.
그림 3 . 컨트롤러 정보 보기 화면 가상 디스크 부팅 순서 변경 Set Bootable Device(부팅 가능한 장치 설정)를 사용하여 가상 디스크의 부팅 순서를 변경할 수 있습니다. 1. Dell PERC S140 Configuration Utility(Dell PERC S140 구성 유틸리티)를 시작합니다. DELL PERC S140 구성 유틸리티 시작 페 이지 27을 참조하십시오. 2. Controller Management(컨트롤러 관리) > Change Controller Properties(컨트롤러 속성 변경)를 클릭합니다. 3. Set Bootable Device(부팅 가능한 장치 설정)를 클릭합니다. Change Order(변경 순서) 대화 상자에 사용할 수 있는 가상 디스크 목록이 표시됩니다. 4. 화살표 키를 사용하여 가상 디스크를 설정하거나 + 또는 -를 사용하여 설정된 순서를 변경하려면 먼저 부팅할 가상 디스크 순서 를 변경합니다. 5. 확인을 클릭합니다.
물리 디스크를 비 RAID 디스크로 전환 1. Dell PERC S140 Configuration Utility(Dell PERC S140 구성 유틸리티)를 시작합니다. DELL PERC S140 구성 유틸리티 시작 페 이지 27을 참조하십시오. 2. Controller Management(컨트롤러 관리) > Convert to Non-RAID Disk(비 RAID 디스크로 전환)를 클릭합니다. 3. 인터페이스 유형을 선택합니다. 4. 물리 디스크를 선택합니다. 사용 가능한 모든 디스크를 선택하려면 Check All(모두 선택)을 클릭합니다. 5. 변경사항 적용을 클릭합니다. 물리 디스크를 RAID 지원 디스크로 전환 주의: 디스크에 이미 있는 모든 데이터가 이 작업 중에 손실됩니다. 물리적 디스크를 RAID 지원 디스크로 변환하기 전에 중요한 데이터를 백업했는지 확인하십시오. 1.
5. 물리적 디스크를 선택하고 Apply Changes(변경 사항 적용)를 클릭합니다. 확인 창이 표시됩니다. 6. Yes(예)를 클릭하여 계속 진행합니다. 7. 구성 옵션 화면으로 돌아가려면 Back(뒤로)을 클릭합니다. 8. 물리적 디스크로 전환한 후 Configuration Options(구성 옵션) 화면에서 Virtual Disk Management(가상 디스크 관리)를 클릭 합니다. 9. Create Virtual Disks(가상 디스크 생성)를 클릭합니다. 10. Select the Physical Disk(물리 디스크 선택)를 클릭합니다. 11. 인터페이스 유형, 미디어 유형, 섹터 크기 및 물리적 디스크를 선택합니다. 12. 변경사항 적용을 클릭합니다. 13. 가상 디스크 크기를 입력하고 Virtual Disk Size Unit(가상 디스크 크기 단위)을 선택합니다. 노트: 디스크 크기 값을 지정하기 전에 단위를 선택하는 것이 좋습니다.
그림 4 . Linux RAID로 전환 선택 페이지 혼합 RAID 구성 시스템이 Windows 및 Linux RAID 디스크 모두에서 혼합 RAID 구성을 감지한 경우, S140 UEFI 구성 유틸리티가 다음 작업을 수행하도 록 권장하는 혼합 구성 화면을 표시합니다. 1. Linux RAID 디스크를 전환하려면 다음 단계를 따르십시오. a. 경고: 혼합 구성 화면에서 Windows RAID 구성을 선택합니다. b. Linux RAID 구성이 나열된 물리 디스크를 선택하고 CONVERT TO NON-RAID(비 RAID로 전환) 링크를 클릭합니다. 디스크를 비 RAID로 전환하지 않으려는 경우 시스템에서 Linux RAID 구성이 있는 물리 디스크를 분리합니다. 2. Windows RAID 디스크를 전환하려면 다음 단계를 따르십시오. a. 경고: 혼합 구성 화면에서 Linux RAID 구성을 선택합니다. b.
표 11. 가상 디스크 속성 (계속) 가상 디스크 선택 드롭다운 메뉴에서 가상 디스크를 선택할 수 있습니다. 가상 디스크 속성 가상 디스크의 ID, RAID 레벨, 상태, 용량 및 섹터 크기를 표시합니다. 가상 디스크 ID 가상 디스크의 ID를 표시합니다. RAID 레벨 가상 디스크의 RAID 레벨을 표시합니다. 가상 디스크 상태 가상 디스크의 상태를 표시합니다. 가상 디스크 용량 가상 디스크의 용량을 표시합니다. 섹터 크기 가상 디스크에 대해 활성화된 섹터 크기를 표시합니다. 가상 디스크 정책 가상 디스크의 읽기 및 쓰기 캐시 정책과 관련 물리 디스크의 쓰기 캐시 정책을 표시합니다. 읽기 캐시 정책 가상 디스크에 관련된 읽기 캐시 정책을 표시합니다. 쓰기 캐시 정책 가상 디스크에 관련된 쓰기 캐시 정책을 표시합니다. 물리 디스크 쓰기 캐시 물리 디스크 쓰기 캐시 정책의 상태를 표시합니다.
표 12. 가상 디스크 속성 보기 (계속) 메뉴 항목 설명 가상 디스크 정책(SATA 드라이브만 해당) 가상 디스크의 읽기 및 쓰기 캐시 정책과 관련 물리 디스크의 쓰기 캐시 정책을 표시합니다. 읽기 캐시 정책(SATA 드라이브만 해 가상 디스크에 관련된 읽기 캐시 정책을 표시합니다. 당) 쓰기 캐쉬 정책(SATA 드라이브만 해 가상 디스크에 관련된 쓰기 캐시 정책을 표시합니다. 당) 물리 디스크 쓰기 캐시(SATA 드라이 특정 가상 디스크에 연결된 물리 디스크를 표시합니다. 브만 해당) 연결된 물리 디스크 연결된 물리적 디스크의 속성을 표시합니다. 그림 5 . 가상 디스크 속성 화면 가상 디스크 삭제 1. Dell PERC S140 Configuration Utility(Dell PERC S140 구성 유틸리티)를 시작합니다. DELL PERC S140 구성 유틸리티 시작 페 이지 27을 참조하십시오. 2.
물리 디스크 관리 이 섹션에서는 물리 디스크를 보고, 선택하고, 관리할 수 있습니다. 노트: NVMe PCIe SSD는 물리 디스크 목록에 있는 슬롯 번호 또는 ID별로 정렬되지 않을 수 있습니다. 노트: 표시되는 물리 디스크 용량은 실제 용량보다 낮을 수 있습니다. 물리 디스크 속성 보기 물리적 디스크 속성 보기 화면에서는 물리 디스크의 속성을 볼 수 있으며 연결된 가상 디스크에 관한 세부 정보를 제공합니다. 시스템 설정 기본 메뉴에서 디바이스 설정 > Dell PERC S140 구성 유틸리티 > 물리적 디스크 관리 > 물리적 디스크 속성 보기를 클릭 합니다. 다음 표는 View Physical Disk Properties(물리 디스크 속성 보기) 화면 세부 사항을 설명합니다. 표 13. 물리적 디스크 속성 보기 메뉴 항목 설명 인터페이스 유형 선택 디스크 유형을 선택할 수 있으며 SATA 및 NVMe 옵션이 있습니다. 물리 디스크 선택 드롭다운 메뉴에서 물리 디스크를 선택할 수 있습니다.
표 13. 물리적 디스크 속성 보기 (계속) 제조 날짜 물리 디스크의 제조 날짜를 표시합니다. 연결된 가상 디스크 연결된 가상 디스크의 디스크 ID, RAID 레벨, 크기 및 상태를 표시합니다. 그림 6 . 물리적 디스크 속성 화면 SATA 드라이브의 물리 디스크 쓰기 캐시 정책 관리 물리 디스크 쓰기 캐시 정책을 활성화하려면 다음 절차를 수행합니다. 1. Dell PERC S140 Configuration Utility(Dell PERC S140 구성 유틸리티)를 시작합니다. DELL PERC S140 구성 유틸리티 시작 페 이지 27을 참조하십시오. 2. Physical Disk Management(물리 디스크 관리) → Select Physical Disk Operations(물리 디스크 운영 선택)를 클릭합니다. 3. 물리 디스크 속성 관리 링크를 클릭합니다. 물리 디스크 속성 관리 화면이 표시됩니다. 4. 하나 또는 여러 개의 물리 디스크를 선택하여 쓰기 캐시 정책을 적용합니다. 5.
6. 변경사항을 저장하려면 Apply(적용)를 클릭합니다. 노트: 재구축 후, 마지막으로 구성한 가상 디스크의 쓰기 캐시 정책에 대한 전역 핫 스페어의 물리 디스크 쓰기 캐시 정책을 변경했는지 확인하십시오. 노트: View Virtual Disk Properties(가상 디스크 속성 보기) 화면에서 물리 디스크 쓰기 캐시 설정이 가상 디스크와 관련된 물리 디스크에 일치하는지 확인합니다. 노트: 시스템에 Linux RAID를 구성한 경우, 물리 디스크 쓰기 캐시 정책 기능 설정을 수정할 수 없습니다. 노트: 물리 디스크 쓰기 캐시 동작에 대한 자세한 내용은 시스템 문제 해결 페이지 42 섹션을 참조하십시오. 전역 핫 스페어 할당 1. Dell PERC S140 Configuration Utility(Dell PERC S140 구성 유틸리티)를 시작합니다. DELL PERC S140 구성 유틸리티 시작 페 이지 27을 참조하십시오. 2.
노트: 암호 지우기는 NVMe PCIe SSD 및 ISE 지원 SATA 드라이브에 대해서만 지원됩니다. 1. Dell PERC S140 Configuration Utility(Dell PERC S140 구성 유틸리티)를 시작합니다. DELL PERC S140 구성 유틸리티 시작 페 이지 27을 참조하십시오. 2. Physical Disk Management(물리 디스크 관리) → Select Physical Disk Operations(물리 디스크 운영 선택)를 클릭합니다. 3. 인터페이스 유형을 선택합니다. 옵션은 SATA 및 NVMe입니다. 4. 드롭다운 메뉴에서 물리 디스크를 선택합니다. 5. Cryptographic Erase(암호 지우기)를 클릭합니다. 6. Yes(예)를 클릭하여 암호화 지우기를 시작합니다. 전역 핫 스페어 보기 View Global Hot Spares(전역 핫 스페어 보기) 화면은 전역 핫 스페어로 할당된 물리 디스크를 표시합니다.
7 드라이버 설치 PERC(PowerEdge RAID Controller) S140을 지원되는 운영 체제에서 작동하려면 소프트웨어 드라이버가 필요합니다. 설치할 드라이버 는 시스템 유형과 설치된 운영 체제에 따라 다릅니다. 노트: 운영 체제 호환성을 확인하려면 www.dell.com/manuals를 참조하십시오. 노트: 운영 체제가 PERC 또는 BOSS 디바이스에 설치되어 있는 경우, DUP(Dell Update Package)를 사용하여 소프트웨어 RAID OS 드라이버를 설치하고 BIOS 설정에서 SATA 및 NVMe를 RAID 모드로 설정해야 합니다. 노트: Life Cycle Controller를 통한 소프트웨어 RAID 드라이버 설치는 지원되지 않습니다. 주제: • • 설치 전 요구사항 Windows 드라이버 설치를 위한 장치 드라이버 매체 생성 설치 전 요구사항 운영 체제를 설치하기 전에 다음을 수행합니다.
그림 8 . BIOS에서 NVMe 설정 노트: RAID에서 비 RAID로 NVMe 모드 설정을 변경할 경우 NVMe 드라이버(Microsoft 또는 타사 NVMe 드라이버)가 Windows 환경에 수동으로 설치되어 있는지 확인합니다. 가상 디스크 생성 가상 디스크 생성에 대한 자세한 내용은 가상 디스크 생성 페이지 23를 참조하십시오. PERC S140 옵션 및 부팅 목록 우선순위 확인 1. Virtual Disks(가상 디스크) 필드에서 부팅 가능한 가상 디스크가 첫 번째로 나열된 가상 디스크인지 확인합니다. 부팅 가능한 가 상 디스크가 첫 번째로 나열된 가상 디스크가 아닌 경우 2개의 가상 디스크 교환 페이지 24를 참조하십시오. 노트: 비 RAID 가상 디스크를 사용하고 Virtual Disks(가상 디스크) 목록에 표시된 경우 시스템에 RAID 지원 물리 디스크가 있 는 경우에만 Swap Two Virtual Disks(2개의 가상 디스크 교환) 옵션이 활성화됩니다. 2.
노트: 서비스 태그가 없을 경우 서비스 태그 자동 검색을 선택하여 서비스 태그가 자동으로 검색되도록 하거나 모든 Dell 제 품 목록에서 선택을 선택하여 제품 선택 페이지에서 제품을 선택합니다. 3. 각 드롭다운 목록에서 운영 체제, 카테고리, 릴리스 날짜 및 중요도를 선택합니다. 선택 항목에 해당하는 드라이버가 표시됩니다. 4. 드라이버는 EXE 파일 또는 ZIP 파일로 다운로드됩니다. 드라이버를 .EXE 파일로 다운할 경우 EXE를 두 번 클릭해야 합니다. EXE 파일이 드라이버를 설치합니다. 드라이버를 ZIP 파일로 다운로드할 경우 USB 드라이브, CD 또는 DVD에 해당 파일의 압축을 풉니 다. 5. 운영 체제를 설치하는 동안에 드라이버 로드 옵션으로 생성한 매체를 사용하여 대용량 스토리지 드라이버를 로드합니다. 운영 체 제 재설치에 대한 자세한 내용은 운영 체제 설명서(https://www.dell.com/operatingsystemmanuals)를 참조하십시오.
8 시스템 문제 해결 Dell PowerEdge RAID 컨트롤러(PERC) S140에 대한 도움말을 얻으려면 Dell 기술 서비스 담당자에게 연락하거나 dell.com/support를 참조하십시오.
노트: 시스템에 일정하게 전원이 공급되고 있는지 확인합니다(UPS가 권장됨). 노트: Dell Lifecycle Controller를 사용하여 가상 디스크를 생성하는 경우 물리 디스크 쓰기 캐시 정책은 기 본값으로 설정됩니다. 물리 디스크 쓰기 캐시 정책 동작에 대한 자세한 내용은 SATA 드라이브에 대한 물 리 디스크 쓰기 캐시 정책 관리 섹션을 참조하십시오. UEFI 또는 OPROM의 모든 기능 설정을 수정할 수 없음 가능한 원인: 가상 디스크 수가 30을 초과하는 경우 UEFI 또는 OPROM의 설정을 수정할 수 없습니다. 수정 조치: 이 문제를 해결하려면 다음을 수행하십시오. 1. 운영 체제를 설치합니다. 2. OpenManage를 사용하여 가상 디스크의 최대 수가 30을 초과하지 않는지 확인합니다. OS 설치 중 추가 재부팅 설명 시스템에서 드라이버 추가 방법을 사용하여 OS 설치 중 한 번 더 추가로 재부팅할 수 있습니다.
시스템이 부팅되지 않음 시스템이 부팅하지 않을 경우 다음 원인을 확인하십시오. ● System Setup(시스템 설치)에서 Controller Mode(컨트롤러 모드)가 잘못됨 ● Boot Mode(부팅 모드), Boot Sequence(부팅 순서) 및/또는 Boot Sequence Retry(부팅 순서 재시도)가 잘못됨 ● 부팅 가능한 가상 디스크가 Failed(오류) 상태임 ● 부팅 가능 가상 디스크에 대한 Boot Order(부팅 순서)가 잘못됨 ● 시스템을 재부팅한 후에 비 RAID 가상 디스크가 더 이상 BIOS 구성 유틸리티(+) 목록의 첫 번째 위치에 있지 않은 경우 ● Linux RAID 구성에서, 생성된 가상 디스크가 최대 한도 30개를 초과하고 부팅 가상 디스크가 UEFI 구성 유틸리티 30개 중 하나로 나열되지 않은 경우. ● Linux RAID 구성에서 S140 UEFI HII에 나열된 첫 드라이브 10개 이외의 드라이브에서 가상 디스크가 생성된 경우.
시스템 재부팅 후 비 RAID 가상 디스크가 더 이상 BIOS 구성 유틸리티 목 록의 첫 번째 위치에 있지 않음 노트: 비 RAID 가상 디스크에서 부팅할 경우 OpenManage Server Administrator에서 가상 디스크를 생성하면 가상 디스크 순서가 변경되고 부팅 가능한 비 RAID 가상 디스크가 첫 번째 위치에서 벗어납니다. 그러면 PERC S140은 첫 번째 가상 디스크에서 부팅 을 시도합니다. 노트: 비 RAID 가상 디스크는 비 RAID 물리 디스크에서 생성될 수 있습니다(PERC S140이 아닌 컨트롤러에 의해 초기화되는 물리 디스크). 1. 시스템 시작 시 메시지가 표시되면 + 키를 눌러 BIOS 구성 유틸리티에 액세스합니다. 2. Virtual Disks(가상 디스크)를 검사하고 부팅 가능한 비 RAID 가상 디스크가 더 이상 첫 번째 위치에 있지 않은지 확인합니다. 3.
● 컨트롤러 오류가 펌웨어 오류 또는 구성 요소 오류로 인해 발생했는지 여부. 컨트롤러에 오류가 발생하면 가상 디스크가 부팅되 지 않습니다. Degraded(성능이 저하됨) 상태에서 가상 디스크를 복구하려면 오류가 발생한 물리 디스크를 교체해야 하고, OpenManage Server Administrator Storage Management를 사용하여 가상 디스크를 재구축해야 합니다. 재구축 작업이 완료되면 가상 디스크 상태가 Degraded(성능이 저하됨)에서 Ready(준비됨)로 변경됩니다. 재구축 기능에 대한 설명은 Storage Management dell.com/support/ manuals를 참조하십시오.
BIOS 화면에 표시되는 기타 오류 NVMe 구성 서버에서 부팅하는 동안 BSOD가 발생함 설명: NVMe 드라이브는 시스템 리소스를 사용합니다. 여러 개의 NVMe 드라이브가 더 적은 수의 코어를 사용하는 서버에 연결되어 있는 경우, NVMe를 수리하기 위한 리소스 부족이 나타나며 BSOD가 발생할 수 있습니다. 개선 조치: BIOS HII > 프로세서 설정에서 논리 프로세서가 활성화되어 있는지 확인하거나 부팅 전에 일부 NVMe 드라이 브를 제거하고 부팅 후 드라이브를 핫 삽입합니다. 덤프 파일 생성 장애 가능한 원인: Samsung PM1733, PM1735 드라이브 및 Toshiba CD5 드라이브에 설치된 운영 체제입니다. 개선 조치: 이것은 예상된 동작입니다. www.dell.com/supportassist 또는 www.dell.com/support/home에서 문의하십시오.
물리적 디스크에 오류 발생 물리적 디스크에 오류가 발생하면 다음 원인을 확인하십시오. ● BIOS 구성 유틸리티에 물리 디스크가 표시되지 않거나 오프라인임 페이지 48. ● 물리 디스크가 BIOS 구성 유틸리티 또는 Ctrl R에서 빨간색으로 강조 표시됨 페이지 48. BIOS 구성 유틸리티에 물리 디스크가 표시되지 않거나 오프라인임 1. 케이블이 올바르게 연결되어 있는지 확인하십시오. 2. 물리 디스크가 시스템의 후면판에 올바르게 설치되어 있는지 확인합니다. 3. 시스템에 후면판에 손상이 있는지 확인합니다. 4. 물리 디스크를 재설치하고 시스템 후면판에 올바로 자리를 잡았는지 확인합니다. 5. 물리 디스크가 SAS 드라이브가 될 수 있는지 확인합니다. 6. 재검색을 수행하여 다음 중 하나를 수행합니다. a. 컨트롤러에 연결된 스토리지 장치의 상태를 업데이트합니다. b. 가상 디스크를 삭제하거나 초기화하여 오류를 수정합니다.
NVMe PCIe SSD에 타사 드라이버 설치 실패 설명: NVMe 모드가 RAID로 설정되어 있는 상태에서 운영 체제 설치를 완료할 때는 NVMe PCIe SSD에 대한 타사 드 라이버 설치가 실패할 수 있습니다. 솔루션 NVMe PCIe SSD용 타사 드라이버는 RAID 모드의 NVMe에서 지원되지 않습니다. 운영 체제 설치를 위한 NVMe PCIe SSD를 찾을 수 없음 가능한 원인: NVMe가 비 RAID 모드인 동안 S140 드라이버가 설치되었습니다. 수정 조치: S140 드라이버를 설치하기 전에 NVMe가 RAID 모드인지 확인하십시오.
VD를 생성하는 동안 십진수의 가상 디스크 크기가 지원되지 않음 가능한 원인: 디스크 크기 값을 입력한 후에 가상 디스크 크기 단위를 MB에서 GB 또는 GB에서 TB 등으로 변경하면 디스크 크기 값이 변경됩니다. 수정 조치: 디스크 크기 값을 지정하기 전에 가상 디스크 크기 단위를 선택하는 것이 좋습니다. 가상 디스크를 생성할 수 없음 가상 디스크를 생성할 수 없으면 다음 원인을 확인하십시오. 1. 물리적 디스크가 표시되지 않습니다. 2. 선택한 물리적 디스크의 이용 가능한 여유 공간이 충분하지 않음 3. 원하는 RAID 레벨에 대해 선택한 물리 디스크의 수가 정확하지 않음 페이지 50. 4. 원하는 물리적 디스크를 사용할 수 없습니다. 5. 시스템에 이미 최대 30개의 가상 디스크가 있음 페이지 50. 물리 디스크가 표시되지 않음 다음과 같은 이유로 오류가 발생했을 수 있습니다: 1. 컨트롤러가 물리 디스크와 통신할 수 없습니다. 2. 케이블이 느슨하거나 불량일 수 있습니다. 3.
4. 가상 디스크의 메타데이터가 손상됨 물리 디스크가 제거되었음 1. 실수로 분리한 경우 기존 물리 디스크를 설치하거나 새 물리 디스크 또는 사용된 물리 디스크로 교체합니다. 2. 새 물리 디스크를 초기화합니다. 교체된 모든 물리 디스크에 대해 Rescan(재검색)을 수행합니다. 3. 물리 디스크가 분리되지 않은 경우 케이블이 올바르게 설치되어 있는지 확인합니다. 물리 디스크와 관련한 물리적 또는 기계적 문제 1. 가상 디스크의 물리 디스크에 오류가 발생했는지 확인합니다. 2. 물리 디스크가 최근에 분리되어 교체된 경우 후면판에 올바르게 놓였는지 확인합니다. 물리 디스크 및 시스템 보드의 케이블 연 결을 확인합니다. 3. Rescan(재검색)을 수행합니다. 가상 디스크에서 중복성이 소실됨 가상 디스크에 포함된 1개 이상의 물리적 디스크에 오류가 발생했습니다. 오류가 발생한 물리적 디스크 때문에 가상 디스크가 더 이 상 중복(미러링 또는 패리티) 데이터를 유지하지 않습니다.
물리 디스크가 다른 유형임 전용 핫 스페어로 사용되는 물리 디스크는 이미 가상 디스크의 일부인 물리 디스크와 반드시 동일한 종류여야 합니다. 예를 들어, 가 상 디스크가 SATA-II 물리 디스크로 구성된 경우 전용 핫 스페어는 반드시 SATA-II 물리 디스크여야 합니다. 전역 핫 스페어를 생성할 수 없음 전역 핫 스페어를 생성할 수 없으면 다음 원인을 확인하십시오. 1. 사용할 수 있는 빈 물리 디스크가 없거나 물리 디스크가 RAID 지원 디스크로 전환되지 않았습니다 페이지 52. 2. 물리 디스크가 이미 가상 디스크의 일부임 3. 전역 핫 스페어로 할당된 물리 디스크에 오류가 발생함 페이지 52. 4. 전역 핫 스페어로 할당된 물리 디스크가 누락되었습니다. 사용할 수 있는 빈 물리 디스크가 없거나 물리 디스크가 RAID 지원 디스크로 전환되 지 않았습니다 추가 물리 디스크를 설치하고 RAID 지원 디스크로 전환하십시오.
2. 물리 디스크가 아직도 전역 또는 전용 핫 스페어로 할당되어 있는지 확인합니다. 3. 핫 스페어로 할당된 물리 디스크에 오류가 발생했는지 확인합니다. 전용 스페어가 BIOS 구성 유틸리티에 표시되지 않거나 오프라인임 1. 물리 디스크가 분리되었거나 오류가 발생했는지 확인합니다. 2. 케이블이 느슨하거나 불량인지 확인합니다. 오류가 발생하거나 성능이 저하된 가상 디스크 가상 디스크에서 하나의 물리 디스크를 분리하면 다음과 같은 상황이 발생합니다. 1. 볼륨 또는 RAID 0 가상 디스크가 Failed(오류) 상태로 변경됩니다. 2. RAID 1 및 RAID 5 가상 디스크가 Degraded(성능이 저하됨) 상태로 변경됩니다. 3. RAID 10 가상 디스크가 Degraded(성능이 저하됨) 상태로 변경됩니다(물리 디스크가 미러링 집합 중 하나에서 분리된 경우). 분리된 물리 디스크를 재삽입하고 가상 디스크의 재검색을 수행하십시오.
9 도움말 얻기 Dell에 연락하여 Dell 제품에 대한 도움말을 얻거나 제품 설명서에 대한 피드백을 보낼 수 있습니다. 주제: • • • • Dell에 문의하기 시스템 서비스 태그 찾기 관련 설명서 설명서에 대한 사용자 의견 Dell에 문의하기 Dell은 온라인 및 전화 기반의 지원 및 서비스 옵션을 제공합니다. 인터넷에 연결되어 있지 않은 경우 구매 송장, 포장 명세서, 청구서 또는 Dell 제품 카탈로그에서 Dell 연락처 정보를 확인할 수 있습니다. 서비스 제공 여부는 국가/지역 및 제품에 따라 다르며 일부 서비 스는 소재 지역에 제공되지 않을 수 있습니다. 판매, 기술 지원 또는 고객 서비스 문제에 대해 Dell에 문의하려면 1. www.dell.com/support/home으로 이동합니다. 2. 페이지 우측 하단에 있는 드롭다운 메뉴에서 국가를 선택합니다. 3. 맞춤화된 지원: a.
설명서에 대한 사용자 의견 Dell EMC 문서 자료의 모든 페이지에 있는 Feedback(피드백) 링크를 클릭해 양식을 작성한 다음 Submit(제출)을 클릭하여 의견을 보낼 수 있습니다.