Dell EMC PowerEdge RAID 控制器 S140 用户指南 December 2020 Rev.
注意、小心和警告 注: “注意”表示帮助您更好地使用该产品的重要信息。 小心: “小心”表示可能会损坏硬件或导致数据丢失,并告诉您如何避免此类问题。 警告: “警告”表示可能会导致财产损失、人身伤害甚至死亡。 © 2017-2020 Dell Inc. 或其子公司。保留所有权利。Dell、EMC 和其他商标是 Dell Inc.
目录 章 1: 概览........................................................................................................................................ 7 PERC S140 规格.................................................................................................................................................................... 7 支持的操作系统....................................................................................................................................................................
交换两个虚拟磁盘..............................................................................................................................................................22 管理热备用盘...................................................................................................................................................................... 23 分配全局热备用盘........................................................................................................................................................
无法使用 UEFI RAID 配置公用程序配置 Linux............................................................................................................... 41 禁用 SATA 物理磁盘写入高速缓存策略后性能下降.....................................................................................................41 无法修改 UEFI 或 OPROM 中的任何功能设置............................................................................................................. 42 在安装操作系统的过程中额外重新引导...................................................................................
章 9: 获得帮助............................................................................................................................... 53 联系戴尔.............................................................................................................................................................................. 53 找到您的系统服务标签..................................................................................................................................................... 53 相关说明文件.....................
1 概览 Dell EMC PowerEdge RAID 控制器 (PERC) S140 是适用于 Dell EMC PowerEdge 系统的软件 RAID 解决方案。S140 控制器支持多达 30 个非易失性高速内存 (NVMe) PCIe SSD、SATA SSD、SATA HDD,具体取决于系统背板配置。 主题: • • • • • PERC S140 规格 支持的操作系统 支持的 PowerEdge 系统 支持的物理磁盘 PERC S140 的管理应用程序 PERC S140 规格 下表提供了适用于 SATA 和 NVMe PCIe SSD 的 PERC S140 规格: 注: 规格有所不同,具体取决于系统型号。 表.
表. 2: PERC S140 的 SATA 规格 (续) 规格 PERC S140 Windows RAID:卷、RAID 1、RAID 0、RAID 5、RAID 10 适用于 SATA 驱动器的基于软件的 RAID Linux RAID:RAID 1 注: 也可以使用本机 Linux RAID 公用程序创建安装在 RAID-1 磁盘上的 Linux 操作系统支持的任何 RAID 级别的非引导虚拟磁盘。 是 直通 SSD 支持 表. 3: PERC S140 的 NVMe 规格 规格 PERC S140 支持的命名空间的最大数量 1 注: 如果连接的驱动器有多个命名空间,则驱动器被标记为离线且无法访问。 NVMe 接口 PCIe/薄型 注: 仅支持戴尔兼容的 NVMe PCIe SSD 2.
表. 4: 具有 SATA 配置的 PERC S140 的虚拟磁盘规格 (续) 规格 PERC S140 卷中的最小物理磁盘数 1 RAID 0 中的最小物理磁盘数 2 RAID 1 中的最小物理磁盘数 2 RAID 5 中的最小物理磁盘数 3 RAID 10 中的最小物理磁盘数 4 注: 上表中列出的配置可能会因您的系统的硬盘背板而异。 表.
注: Windows Server 2012 R2 操作系统在 AMD 平台上不受支持。 ● Linux ○ Red Hat Enterprise Linux 7.3 及更高版本 ○ SUSE Linux Enterprise Server 版本 12 SP2 及更高版本 注: S140 仅支持用于预引导配置公用程序功能的 Linux,以便启用 Linux MDRAID。有关详细信息,请参阅 Linux RAID。 注: 有关支持的操作系统列表和驱动程序安装说明,请参阅 https://www.dell.com/operatingsystemmanuals 中的系统说明文件。 有关特定操作系统服务包要求,请参阅 www.dell.
注: 单个 RAID 虚拟磁盘中不支持混合 NVMe PCIe SSD 和 SATA 驱动器。 PERC S140 的管理应用程序 管理应用程序用于管理和配置 RAID 子系统、创建并管理多个磁盘组、控制并监测多个 RAID 系统以及提供联机维护。适用于 PERC S140 的管理应用程序包括: ● BIOS 配置实用程序 — 这也称做 Ctrl+R,是一个用于配置和维护 RAID 磁盘组和虚拟磁盘的存储管理应用程序。请参阅 BIOS 配置 公用程序 页面上的 20。 ● 统一可扩展固件接口 (UEFI) RAID 配置实用程序。此存储管理应用程序集成到系统 BIOS,并可通过 F2 键访问。请参阅 UEFI RAID 配置公用程序 页面上的 26。NVMe PCIe SSD 上的 RAID 配置仅通过 UEFI RAID 配置实用程序受支持。 注: 确保已为 NVMe PCIe SSD 启用 RAID 模式。请参阅 将 NVMe PCIe SSD 设置为 RAID 模式 页面上的 38 ● OpenManage Storage Management - 此应用程序使您能够从单个图形或命令行界面为所有支持的
2 物理磁盘 注: 虚拟磁盘中的物理磁盘必须是相同的驱动器类型(HDD、SSD 或 NVMe PCIe SSD)。例如,您不能在同一个虚拟磁盘中混合 使用 HDD 和 NVMe PCIe SSD。 注: 当磁盘上正在运行后台任务时,驱动器活动 LED 会持续闪烁。 主题: • 物理磁盘功能 物理磁盘功能 物理磁盘漫游 物理磁盘漫游是指将物理磁盘从一个电缆连接或背板插槽移动到另一个。控制器将自动识别重新定位的物理磁盘,并从逻辑上将其 放置到属于磁盘组一部分的虚拟磁盘。仅当系统关闭时才能执行磁盘漫游。 小心: 请勿在联机容量扩展 (OCE) 过程中尝试磁盘漫游。这将导致虚拟磁盘丢失。 物理磁盘热插拔 注: 要检查背板是否支持热插拔,请参阅您的系统文档。 热插拔是手动更换磁盘,而 PERC S140 处于联机状态并执行正常功能。在热插拔物理磁盘之前,必须满足以下要求: ● 系统背板或机柜必须支持 PERC S140 热插拔。 ● 更换磁盘的协议和磁盘技术必须相同。例如,只有 SATA 硬盘可以更换 SATA 硬盘,并且只有 SATA SSD 可以更换 SATA SSD。 注: 在 UEFI 模式下不支持磁盘
容错 PERC S140 具有以下容错功能: ● 物理磁盘故障检测(自动)。 ● 使用热备用进行虚拟磁盘重建(如果已为此功能配置热备用,则会自动执行)。 ● 奇偶校验生成和检查(仅限 RAID 5)。 ● 物理磁盘的手动更换可热交换,无需重新引导系统(仅用于带有可热交换背板的系统)。 如果 RAID 1(镜像)的一端发生故障,则可使用镜像另一端的物理磁盘重建数据。 如果 RAID 5 中的物理磁盘发生故障,其余物理磁盘上存在有奇偶校验数据,则可使用该奇偶校验数据将数据还原到配置为热备用的 新的更换的物理磁盘。 如果 RAID 10 中的物理磁盘发生故障,则虚拟磁盘仍将正常工作,并从幸存的镜像物理磁盘中读取数据。每个镜像集中的单个磁盘发 生故障时,仍可继续运行,具体视镜像集发生的故障而定。 自我监测和报告技术 自我监控和报告技术 (SMART) 可监控所有电机、磁头和物理磁盘电子元件的内部性能,以检测出可预测的物理磁盘故障。与 SMART 兼容的物理磁盘上的数据可被监控,以识别值的更改并确定这些值是否在阈值限制内。许多机械和电气故障会在故障之前表 现出一些性能下降。 SMART 故障也称为可预测的故障。有许多
注: RAID 配置和从 NVMe 虚拟磁盘引导仅在 UEFI 引导模式下才受支持。 注: 在配备 NVMe PCIe SSD 的系统上不支持使用 Option ROM (OPROM) 执行 RAID 配置。 适用于 SATA 驱动器的物理磁盘写入高速缓存策略 物理磁盘写入高速缓存策略功能首先利用磁盘对数据进行高速缓存,然后高速缓存数据写入到后台的存储设备。有关管理物理磁盘 写入高速缓存策略的更多信息,请参阅 管理 SATA 驱动器的物理磁盘写入高速缓存策略 页面上的 35。 注: 您可以使用 UEFI 或选项 ROM (OPROM) 配置物理磁盘写入高速缓存策略。 注: 您无法配置非 RAID 磁盘上的物理磁盘写入高速缓存策略。 注: Linux RAID 不支持配置物理磁盘写入高速缓存策略或虚拟磁盘写入高速缓存策略。 Linux RAID 支持的 Linux 操作系统: ● Red Hat Enterprise Linux 7.
3 虚拟磁盘 PERC S140 上所连物理磁盘的逻辑分组允许创建相同 RAID 级别的多个虚拟磁盘,而不会超过 30 个虚拟磁盘的最大值。 PERC S140 控制器允许: ● 在 S140 控制器上创建不同 RAID 级别的虚拟磁盘。 注: 请确保未在相同物理磁盘上混合使用不同的 RAID 级别。 ● 针对不同应用的不同特点构建不同的虚拟磁盘。 ● 通过混合使用 NVMe PCIe SSD 2.
后台阵列扫描 验证和校正虚拟磁盘的镜像、卷或奇偶校验数据上的可更正介质错误。在 Windows 操作系统中创建虚拟磁盘后,后台阵列扫描 (BAS) 会自动启动。 点检验 允许不同类型的检验点在重新启动后在上一个点恢复。系统重新启动后,后台检验点会在最近的检验点恢复。 可用的三种检验点类型为: ● 一致性检查 (CC) ● 后台初始化 (BGI) ● 重建 一致性检查 一致性检查 (CC) 是后台操作,可检验和纠正容错虚拟磁盘的镜像或奇偶校验数据,建议您定期对物理磁盘执行一致性检查。建议您 定期在物理磁盘上运行一致性检查。 默认情况下,一致性检查会纠正镜像或奇偶校验不一致问题。纠正数据后,系统会假定在镜像集中的主要物理磁盘上的数据为正确 的数据,然后将其写入到镜像集的辅助物理磁盘中。 CC 操作会通过事件通知报告数据不一致问题。在 BIOS 配置实用程序中无法由用户启动的 CC 可以使用 Ctrl + R 访问。但是,可以使 用 OpenManage Server Administrator Storage Management 启动 CC 操作。有关更多信息,请参阅 OMSA 用户指南:www.dell.
表. 6: PERC S140 的读取、写入和高速缓存策略 类别 S140 控制器支持 高速缓存设置 是 预读/回写 是 不预读/回写 是 预读/直写式 是 不预读/直写式 是 注: 启用写高速缓存模式的当前默认设置为 Write Through(直写式)、No Read Ahead(不预读)(WT、NRA)。要启用 Write Back(回写式)(WB),建议使用 UPS。 注: 有关物理磁盘写入高速缓存策略行为的更多信息,请参阅 系统故障排除 页面上的 41 虚拟磁盘迁移 PERC S140 支持从一个 PERC S140 到另一个的自动虚拟磁盘迁移。 小心: 如果在联机容量扩展 (OCE)/重新配置期间执行虚拟磁盘迁移,则虚拟磁盘将会丢失。 注: 在迁移虚拟磁盘之前备份虚拟磁盘数据。 注: 确保已迁移虚拟磁盘部分的所有物理磁盘。将会自动迁移处于最佳和降级状态的虚拟磁盘。不得迁移处于脱机状态的虚拟磁 盘。 注: 在不同的系统型号之前不能迁移可引导虚拟磁盘。 注: 当您迁移虚拟磁盘时,请确保您验证的虚拟磁盘数目不超过 10 个。 迁移虚拟磁盘 1. 关闭包含源控制器的系统。 2.
4 S140 驱动器布线 小心: 多数维修只能由经认证的维修技术人员进行。您只能根据产品说明文件中的授权,或者在联机或电话服务和支持团队的指 导下进行故障排除和简单维修。任何未经 Dell 授权的服务所导致的损坏均不在保修范围之列。请阅读并遵循您的产品附带的安 全说明。 注: 有关卸下和重新安装系统部件的信息,请参阅 dell.com/poweredgemanuals 上的 PowerEdge systems owner’s manuals (PowerEdge 系统用户手册)。 本节提供了有关集成式 PERC S140 控制器布线的信息。 注: 有关 S140 SATA 和 NVMe PCIe SSD 布线的信息,请参阅 dell.com/poweredgemanuals 上的系统用户手册。 1. 关闭系统,包括所有已连接的外围设备,并断开系统与电源插座和外围设备的连接。 注: 拆装系统内部组件时,建议始终使用防静电垫和防静电腕带。 2. 卸下系统护盖。 3. 找到系统板上的连接器 J_SATA A 和 J_SATA B。 4.
图 1: S140 控制器布线 1. 背板 2. 系统板 3. 第一个 AHCI 设备 (J_SATA A) 上的连接器 4. 第二个 AHCI 设备 (J_SATA B) 上的连接器 主题: • AHCI 设备的磁盘连接 AHCI 设备的磁盘连接 S140 控制器支持带有最多两个 AHCI 设备的系统。对于带有两个 AHCI 设备的系统,第一个 AHCI 设备从端口 0-5 连接驱动器,第二 个 AHCI 设备可从端口 6-13 连接驱动器。 下表提供了有关磁盘连接到第 14 代 PowerEdge 系统上支持的 AHCI 设备的信息。 表.
5 BIOS 配置公用程序 BIOS 配置公用程序(也称为 Ctrl+R 或选项 ROM (OPROM))是集成在系统 BIOS 中并可在系统引导期间使用 F2 访问的存储管理应 用程序,可配置和维护 SATA 驱动器上的 RAID 磁盘组和虚拟磁盘。BIOS 配置公用程序 (Ctrl+R) 独立于操作系统。 注: 使用 Ctrl+R 可进行初始设置和灾难恢复。您可以通过 OpenManage 存储管理应用程序使用高级功能。 注: 不支持使用 BIOS 配置公用程序配置 NVMe PCIe SSD。 注: 确保在预引导期间仅使用 S140 UEFI 配置公用程序来配置 NVMe PCIe SSD。要启用 NVMe PCIe SSD 的 RAID 模式,请参阅将 NVMe PCIe SSD 设置为 RAID 模式 页面上的 38。 注: 在配备 NVMe PCIe SSD 的系统上不支持使用 OPROM 执行 RAID 配置。 以下部分提供了关于使用 Ctrl+R 的信息。有关更多信息,请参阅联机帮助选项:在 Ctrl+R 中按 F1。 下表显示了在 Ctrl+R 中 PERC S140 支持或不支持的任务。
注: 如果 BIOS 配置公用程序中 不显示且您的系统使用 PERC S140,请按 F2 键访问系统 BIOS。在 SATA Settings(SATA 设置)字段中,确保 SATA 控制器设置为 RAID 模式。如果设置正确并且未显示 BIOS 配置实用程序 ,请联系戴尔支持:https://www.dell.com/supportdell.com/support。 退出 BIOS 配置公用程序 1. 在任一菜单屏幕上按 Esc 键。 将显示确认选择对话框。 2.
创建虚拟磁盘 1. 进入 BIOS 配置公用程序。请参阅进入 BIOS 配置公用程序 页面上的 20。 2. 从 Main Menu(主菜单)屏幕中,选择 Create Virtual Disks(创建虚拟磁盘),然后按 键。 注: S140 控制器的每个物理磁盘支持最多 30 个虚拟磁盘。如果超过了虚拟磁盘数最大限制值 30,您不能修改 UEFI 或 OPROM 中的任何功能设置。有关对此问题进行故障排除的更多信息,请参阅 无法修改 UEFI 或 OPROM 中的任何功能设置 页面上的 42。 3. 在 Physical Disks (物理磁盘)区域,选择要在其上创建虚拟磁盘的物理磁盘: a. 要创建物理磁盘,请按 Insert 键。 b. 选择虚拟磁盘中将包含的物理磁盘之后,按 Enter 键。 4. 在 User Input(用户输入)区域,使用箭头键选择虚拟磁盘类型(RAID 级别),然后按 Enter 键。 5. 根据物理磁盘的可用空间选择虚拟磁盘的大小,按 Enter 键。 6.
4. 使用箭头键高亮显示另一个虚拟磁盘。按 Insert 键。 5. 按 Enter 键切换虚拟磁盘。 注: 一次仅可交换两个虚拟磁盘。 注: 当您创建最多 30 个虚拟磁盘和使用 BIOS 配置实用程序切换虚拟磁盘时,选项 ROM (OPROM) 中的虚拟磁盘顺序与操 作系统中的虚拟磁盘顺序不同。 管理热备用盘 Manage Hot Spare (s)(管理热备用)屏幕使您可以分配或取消分配全局或专用热备用盘。 1. 进入 BIOS 配置公用程序。请参阅进入 BIOS 配置公用程序 页面上的 20。 2.
取消分配热备用盘 1. 进入 BIOS 配置公用程序。请参阅进入 BIOS 配置公用程序 页面上的 20。 2. 在 Main Menu(主菜单)屏幕中,选择 Manage Hot Spare(管理热备用),然后按 Enter 键。 3. 选择 Unassign Hot Spare(取消分配热备用)。按 Enter 键。 4. 使用向上或向下箭头键在作为热备用的物理磁盘中选择要删除的项。 5. 按 Insert 键。要删除热备用,按 Enter 键 6. 按 C 键确认操作。 查看物理磁盘详细信息 1. 进入 BIOS 配置公用程序。请参阅进入 BIOS 配置公用程序 页面上的 20。 2. 在 Main Menu(主菜单)屏幕,选择 View Physical Disk Details(查看物理磁盘详细信息),然后按 键。 3. 使用箭头键选择一个物理磁盘。 4. 显示物理磁盘的下列详细信息: a. b. c. d. e. f. g. h. i.
控制器选项 控制器选项功能可帮助您启用 BIOS Stop on Error (在出现错误时 BIOS 停止)选项。当 Pause if...(暂停条件 ...)启用且某个虚 拟磁盘状态变为 Degraded(降级) 或 Failed(故障)时,引导过程暂停。按 键继续引导。 查看窗口中的错误消息。如果 Pause...(暂停...)处于 OFF(关闭)状态,则将短暂显示错误消息,但系统将继续引导。 1. 进入 BIOS 配置公用程序。请参阅进入 BIOS 配置公用程序。 2. 在 Main Menu(主菜单)屏幕中,使用箭头键选择 Controller Options(控制器选项)。 3. 在 Controller Options (控制器选项)区域,使用向上或向下箭头键滚动到所需的控制器选项。 a. 降级时暂停 如果设为 ON(开启),当发现降级的虚拟磁盘时,BIOS 将停止引导。 按 键 在 ON(开启)与 OFF(关闭)之间切换。 b.
6 UEFI RAID 配置公用程序 统一可扩展固件接口 (UEFI) RAID 配置公用程序 — 是一个集成在系统 BIOS F2 中的存储管理应用程序。它可以用于配置和管理 RAID、虚拟磁盘和物理磁盘。此公用程序独立于操作系统。 注: 以下各节提供了有关使用 UEFI RAID 配置公用程序的信息。有关更多信息,请参阅 UEFI RAID 配置公用程序中的联机帮助选 项。 注: 确保在预引导期间仅使用 S140 UEFI 配置公用程序来配置 NVMe PCIe SSD。要启用 NVMe PCIe SSD 的 RAID 模式,请参阅 将 NVMe PCIe SSD 设置为 RAID 模式 页面上的 38 注: 使用 UEFI RAID 配置公用程序可进行初始设置。 主题: • • • • • 进入 DELL PERC S140 配置实用程序 退出 DELL PERC S140 配置公用程序 控制器管理 虚拟磁盘管理 物理磁盘管理 进入 DELL PERC S140 配置实用程序 1. 开启系统。 2.
图 2: DELL PERC S140 配置实用程序 退出 DELL PERC S140 配置公用程序 要退出该公用程序并返回到系统设置屏幕,请单击屏幕右下角的 Finish (完成)。 控制器管理 查看控制器属性 通过查看控制器信息屏幕,您可以查看控制器和固件属性。 在 System Setup Main Menu(系统设置主菜单)中,单击 Device Settings(设备设置) > Dell PERC S140 Configuration Utility (Dell PERC S140 配置公用程序) > Controller Management(控制器管理) > View Controller Information(查看控制器信 息)。 下表解释了 View Controller Information(查看控制器信息)屏幕的详细信息: 表.
图 3: 查看控制器信息屏幕 更改虚拟磁盘的引导顺序 Set Bootable Device(设置可引导设备)允许您更改虚拟磁盘的引导顺序。 1. 进入 Dell PERC S140 配置公用程序。请参阅进入 DELL PERC S140 配置实用程序 页面上的 26。 2. 单击 Controller Management(控制器管理) > Change Controller Properties(更改控制器属性)。 3. 单击 Set Bootable Device(设置可引导设备)。 Change Order(更改顺序)对话框会显示可用虚拟磁盘的列表。 4. 使用箭头键设置虚拟磁盘和 + 或 - 号更改需要首先引导的虚拟磁盘的顺序。 5. 单击 OK(确定)。 将显示虚拟磁盘引导顺序的变化。 在出现严重 BIOS 错误的情况下停止系统引导 在 Change Controller Properties(更改控制器属性) 屏幕中,您可以启用或禁用该选项,以使系统在出现任何严重 BIOS 错误时停 止引导,这需要手动干预。 1.
4. 选择 physical disks(物理磁盘)。单击 Check All(检查全部),以选择可用的所有磁盘。 5. 单击应用更改。 物理磁盘转换 RAID 功能磁盘 小心: 在此操作期间,磁盘上现有的任何数据都将丢失。确保您已备份关键数据,然后再将物理磁盘转换为支持 RAID 的磁盘。 1. 进入 Dell PERC S140 配置公用程序。请参阅进入 DELL PERC S140 配置实用程序 页面上的 26。 2. 单击控制器管理 > 转换为 RAID 型磁盘。 3. 选择 RAID 类型。 注: 如果已配置 RAID,RAID 类型将不可用。要启用 RAID 类型,请将磁盘转换为非 RAID 磁盘(请参阅将物理磁盘转换为非 RAID 磁盘),然后再将其转换为 RAID 功能磁盘。 4. 选择磁盘介质类型。 5. 选择物理磁盘以转换为 RAID 功能磁盘。如果您希望选择所有可用的磁盘,请选择 Check All(全部选中)。 6.
注: 建议在指定磁盘大小的值之前,先选择单位。输入值后更改单位,可能会更改磁盘大小。 14. 选择 Read Cache Policy(读取高速缓存策略)。 15. 选择 Write Cache Policy(写入高速缓存策略)。 16. 选择 Physical Disk Write Cache(物理磁盘写入高速缓存)。 17. 单击创建虚拟磁盘。 虚拟磁盘已就绪。 配置 Linux RAID 注: Linux RAID 功能在所有第 14 代系统上受支持。要启用 NVMe PCIe SSD 的 RAID 模式,请参阅 将 NVMe PCIe SSD 设置为 RAID 模式 页面上的 38。有关安装 SLES 15 的更多信息,请参阅 SUSE 支持。 1. 进入 Dell PERC S140 配置公用程序。请参阅进入 DELL PERC S140 配置实用程序 页面上的 26。 2. 单击控制器管理 → 转换为 RAID 型磁盘。 3.
图 4: 转换为 Linux RAID 选择页面 混合 RAID 配置 如果系统检测到同时包含 Windows 和 Linux RAID 磁盘的混合 RAID 配置,则 S140 UEFI 配置公用程序将显示混合配置屏幕,其中建议 您执行以下任务: 1. 要转换 Linux RAID 磁盘,请执行以下操作: a. 在“WARNING: MIXED CONFIGURATION”(警告:混合配置)屏幕中,选择 Windows RAID 配置。 b. 选择列出了 Linux RAID 配置的物理磁盘,然后单击链接 CONVERT TO NON-RAID(转换为非 RAID)。如果您不想将磁盘转 换为非 RAID,请从系统中移除具有 Linux RAID 配置的物理磁盘。 2. 要转换 Windows RAID 磁盘,请执行以下操作: a. 在“WARNING: MIXED CONFIGURATION”(警告:混合配置)屏幕中,选择 Linux RAID 配置。 b.
表.
表. 12: 查看虚拟磁盘属性 (续) 菜单项 说明 Virtual Disk Capacity(虚拟磁盘容 量) 显示虚拟磁盘的容量 扇区大小 显示已启用的扇区大小 虚拟磁盘策略(仅限 SATA 驱动 器) 显示虚拟磁盘的读取和写入高速缓存策略以及关联的物理磁盘的写入高速缓存策略 读取高速缓存策略(仅限 SATA 驱 动器) 显示与虚拟磁盘相关联的读取高速缓存策略 写入高速缓存策略(仅限 SATA 驱 动器) 显示与虚拟磁盘相关联的写入高速缓存策略 物理磁盘写入高速缓存(仅限 SATA 显示与特定虚拟磁盘相关联的物理磁盘 驱动器) 关联的物理磁盘 显示关联的物理磁盘的属性 图 5: 虚拟磁盘属性屏幕 删除虚拟磁盘 1. 进入 Dell PERC S140 配置公用程序。请参阅进入 DELL PERC S140 配置实用程序 页面上的 26。 2. 单击 Virtual Disk Management(虚拟磁盘管理) > Select Virtual Disk Operations(选择虚拟磁盘操作)。 3. 从下拉菜单中选择要删除的虚拟磁盘。 4.
注: 当发生降级或出现故障的虚拟磁盘从一个系统添加到另一个系统,以及添加的虚拟磁盘数量超过了最大限制值 30,则不能删 除处于 Normal(正常)或 Ready(就绪)状态的虚拟磁盘。 物理磁盘管理 此部分使您可以查看、选择和管理物理磁盘。 注: 在物理磁盘列表中,不能按照 NVMe PCIe SSD 的插槽编号或 ID 进行排序。 注: 显示的物理磁盘容量可能低于实际容量。 查看物理磁盘属性 V 查看物理磁盘属性屏幕允许您查看物理磁盘的属性,也提供关联的虚拟磁盘的详情。 在系统设置程序主菜单中,单击设备设置 > Dell PERC S140 配置实用程序 > 物理磁盘管理 > 查看物理磁盘属性。下表列出了 View Physical Disk Properties(查看物理磁盘属性)屏幕的详细信息: 表.
表. 13: 查看物理磁盘属性 (续) 注: 连接 Toshiba NVMe 驱动器时,显示“Unknown”选项。 型号 显示物理磁盘的型号。 Manufacturing Date(制造日期) 显示物理磁盘的制造日期。 Associated Virtual Disks(关联的虚拟磁盘) 显示关联虚拟磁盘的磁盘 ID、RAID 级别、大小和状态。 图 6: 物理磁盘属性屏幕 管理 SATA 驱动器的物理磁盘写入高速缓存策略 执行以下步骤可启用物理磁盘写入高速缓存策略: 1. 进入 Dell PERC S140 配置公用程序。请参阅进入 DELL PERC S140 配置实用程序 页面上的 26。 2. 单击 Physical Disk Management(物理磁盘管理) → Select Physical Disk Operations(选择物理磁盘操作)。 3. 单击链接 Manage Physical Disk Properties(物理磁盘属性)。 此时显示 Manage Physical Disk Properties(管理物理磁盘属性)屏幕。 4.
物理磁盘写入高 说明 速缓存策略 启用 所选磁盘上已启用此功能。 Disable(禁用) 所选磁盘上已禁用此功能。 6. 单击 Apply(应用)以保存更改。 注: 确保您在重建之后将全局热备用盘的物理磁盘写入高速缓存策略更改为上次配置的虚拟磁盘的写入高速缓存策略。 注: 在 View Virtual Disk Properties(查看虚拟磁盘属性)屏幕中,确保与虚拟磁盘关联的各物理磁盘的物理磁盘写入高速 缓存设置一致。 注: 如果您在系统上配置了 Linux RAID,则无法修改物理磁盘写入高速缓存策略功能设置。 注: 有关物理磁盘写入高速缓存行为的更多信息,请参阅 系统故障排除 页面上的 41 部分。 分配全局热备用 1. 进入 Dell PERC S140 配置公用程序。请参阅进入 DELL PERC S140 配置实用程序 页面上的 26。 2. 单击 Physical Disk Management(物理磁盘管理) > Select Physical Disk Operations(选择物理磁盘操作)。 3. 从下拉菜单中选择处于就绪状态的物理磁盘。 4.
加密擦除 警告: 执行加密擦除会导致永久性数据丢失。 注: 加密擦除仅在 NVMe PCIe SSD 以及支持 ISE 的 SATA 驱动器上受支持。 1. 进入 Dell PERC S140 配置公用程序。请参阅进入 DELL PERC S140 配置实用程序 页面上的 26。 2. 单击 Physical Disk Management(物理磁盘管理) → Select Physical Disk Operations(选择物理磁盘操作)。 3. 选择“Interface Type”(接口类型)。 选项包括 SATA 和 NVMe。 4. 从下拉菜单中选择物理磁盘。 5. 选择 Cryptographic Erase(加密擦除)。 6.
7 安装驱动程序 PowerEdge RAID 控制器 (PERC) S140 需要软件驱动程序才能与受支持的操作系统一起操作。要安装哪些驱动器取决于系统的类型和 安装的操作系统。 注: 要检查操作系统兼容性,请参阅 www.dell.com/manuals。 注: 如果操作系统安装在 PERC 或 BOSS 设备上,请确保在 BIOS 设置中 SATA 和 NVMe 处于 RAID 模式时,使用 Dell Update Package (DUP) 安装软件 RAID 操作系统驱动程序。 注: 不支持通过生命周期控制器安装软件 RAID 驱动程序。 主题: • • 预安装要求 为安装 Windows 驱动程序创建设备驱动程序介质 预安装要求 安装操作系统之前: ● 请阅读随 Windows 操作系统附带的 Microsoft Getting Started(Microsoft 使用入门)说明文件。 ● 确保系统具有最新的 BIOS、固件和驱动程序更新。如果需要,请从 dell.
图 8: BIOS 中的 NVMe 设置 注: 如果将 NVMe 模式设置从 RAID 更改为非 RAID,请确保在 Windows 环境中手动安装 NVMe 驱动程序(Microsoft 或第三 方 NVMe 驱动程序)。 创建虚拟磁盘 有关创建虚拟磁盘的更多信息,请参阅 创建虚拟磁盘 页面上的 22。 检查 PERC S140 选项和引导列表优先级。 1. 在 Virtual Disks(虚拟磁盘)字段中,确保可引导的虚拟磁盘为列出的首个虚拟磁盘。如果该可引导虚拟磁盘并非列出的首个虚 拟磁盘,请参阅 交换两个虚拟磁盘 页面上的 22。 注: 如果使用了非 RAID 虚拟磁盘(且出现在 Virtual Disks(虚拟磁盘)列表中),只有当系统包含一张 RAID 功能物理磁盘 时,才会启用 Swap Two Virtual Disks(交换两个虚拟磁盘)选项。 2. 选择 Continue to Boot(继续引导),并按 Enter 键。 为安装 Windows 驱动程序创建设备驱动程序介质 从适用于所有操作系统的戴尔支持网站下载 PERC S140 的驱动程序 1. 转至 www.dell.
注: 如果您没有服务编号,请选择自动为我检测服务编号以允许系统自动检测您的服务编号,或选择从所有戴尔产品的列表 中选择以从产品选择页中选择您的产品。 3. 从各自的下拉列表中选择操作系统、类别、发行日期和重要性。 将显示适用于所选内容的驱动程序。 4. 将驱动程序下载为 EXE 文件或 ZIP 文件。当驱动程序下载为 .EXE 文件时,您需要双击 EXE。EXE 文件将安装驱动程序。如果驱 动程序下载为 ZIP 文件,请将这些文件解压到 USB 驱动器、CD 或 DVD 中。 5. 在操作系统安装期间,使用通过加载驱动程序选项创建的介质,载入大容量存储驱动程序。有关重新安装操作系统的更多信息, 请参阅位于 https://www.dell.
8 系统故障排除 要获得有关 Dell PowerEdge RAID 控制器 (PERC) S140 的帮助,请联系 Dell 技术服务代表或访问 dell.
无法修改 UEFI 或 OPROM 中的任何功能设置 可能的原因: 如果超过了虚拟磁盘数最大限制值 30,您不能修改 UEFI 或 OPROM 中的任何设置。 纠正措施: 要解决这个问题: 1. 启动操作系统。 2. 使用 OpenManage 确保虚拟磁盘的最大数量不超过 30。 在安装操作系统的过程中额外重新引导 说明 使用驱动程序注入方法安装操作系统期间,系统会额外重新引导一次。 可能的原因: RAID 模式中的 SATA 和非 RAID 模式中的 NVMe 可能导致配备 NVMe PCIe 的系统在操作系统安装期间额外重 新引导一次。 启用虚拟机管理程序后,系统显示蓝屏死机 可能的原因: 内存不足导致软件 RAID 驱动程序无法启用服务器上的虚拟机管理程序。 纠正行动: 将 S140 驱动程序版本更新至 5.4.1.1 或更高版本。 在 BIOS 中启用节点交叉存取后,系统显示蓝屏死机 可能的原因: 操作系统驱动程序操作的内存不足。 纠正措施: 将 S140 驱动程序版本更新至 5.4.1.
● 系统重新引导之后,非 RAID 虚拟磁盘不再位于 BIOS 配置公用程序 Ctrl+R 中的首位位置。 ● 在 Linux RAID 配置中,如果创建的虚拟磁盘数量超过最大限制 30 并且引导虚拟磁盘未列为 UEFI 配置实用程序中的 30 个虚拟磁 盘之一。 ● 在 Linux RAID 配置中,如果从驱动器创建的虚拟磁盘数量超过 16,则 140 UEFI HII 中将只列出前 10 个驱动器。 系统设置中未正确设置控制器模式 1. 在系统启动过程中,出现 Dell 开机自检 (POST) 屏幕时,按 F2 进入系统 BIOS 屏幕。 2. 滚动至 SATA Settings(SATA 设置)。然后按 Enter 键并确保 SATA Controller(SATA 控制器)已设置为 RAID 模式。 警告: 在从 RAID Mode(RAID 模式) 切换至 ATA Mode(ATA 模式)或 AHCI Mod(AHCI 模式)时,可能会丢失数据。 引导模式、引导顺序和/或引导顺序重试的设置错误 1. 开启系统。 2.
BIOS 配置公用程序选项没有显示 如果在系统 BIOS 中 PERC S140 模式设置不正确,BIOS 配置公用程序 Ctrl+R 选项不会显示。有关正确的 SATA Setting(SATA 设 置),请参阅 系统设置中未正确设置控制器模式 页面上的 43 使用选项 ROM 公用程序配置 RAID 已禁用 使用 PERC S140 配置公用程序,在带有 NVMe PCIe SSD 的系统上配置 RAID。 警告信息 在系统引导顺序过程中,Dell Inc.
● 确定冗余虚拟磁盘中是否发生两个或以上物理磁盘故障。如果 Yes(是),则会导致数据丢失。请从备份存储源恢复丢失的数 据。 注: 对于 RAID 10 配置,如果每个镜像集中的单个物理磁盘发生故障,冗余虚拟磁盘会变为 Degraded(降级)状态,但数据不 会丢失。如果其中一个镜像集中有两个物理磁盘发生故障,冗余虚拟磁盘将变为 Failed(故障)状态,并将导致数据丢失。 警告:已发现处于降级和故障状态的虚拟磁盘 当多个虚拟磁盘处于 Degraded(降级) 和 Failed(故障)状态,并在 BIOS 配置公用程序 Ctrl+R 中将 Pause if Degraded(降级 时暂停)或 Pause if Failed(故障时暂停)设置为 ON(开)时,便会出现此警告消息。 显示警告后出现以下信息:--- Press Enter to continue, or Ctrl+R to enter setup ---。 按 键可让操作系统继续进行引导,或按 Ctrl+R 组合键进入 BIOS 配置公用程序 Ctrl+R 以调查虚拟磁盘 Degraded(降级) 和 Failed(故障)的原因。
如果系统中当前有多于 30 个虚拟磁盘时,不能删除虚拟磁盘 可能的原因: 不支持该功能。 纠正措施: 除了最后添加的一个物理磁盘,移除所有物理磁盘。然后删除无用的虚拟磁盘。请记住,留意当前使用的虚 拟磁盘。 BIOS 配置公用程序 () 或 UEFI HII 中的虚拟磁盘重建状态 可能的原因: BIOS 配置公用程序 () 或 UEFI HII 模式中不支持重建。 纠正措施: 引导至受支持的操作系统。开始重建。要查看重建状态,请安装受支持的存储应用程序。 物理磁盘 - 相关错误 ● ● ● ● ● ● ● 物理磁盘发生故障 页面上的 46 无法初始化物理磁盘 状态 LED 不工作 闪烁和取消闪烁功能在 PowerEdge R740 上不起作用 页面上的 47 无法使用 Dell Update Package (DUP) 更新 NVMe PCIe SSD 固件 页面上的 47 针对 NVMe PCIe SSD 失败的第三方驱动程序安装 页面上的 47 无法找到用于操作系统安装的 NVMe PCIe SSD 页面上的 47 物理磁盘发生故障 如果物理磁盘发生
3. 报告 Offline(脱机)状态。 只能对 Ready(就绪)状态的物理磁盘进行初始化。 状态 LED 不工作 确保系统引导至操作系统。安装 Open Manage Server Administrator 管理公用程序版本 8.0(或更高版本)。 闪烁和取消闪烁功能在 PowerEdge R740 上不起作用 说明 闪烁任务可以让用户通过使磁盘上的一个发光二极管 (LED) 闪烁,从而找到机柜内的该磁盘。此功能目前不 受配备 2.
为 Linux 创建虚拟磁盘时列出了过时的分区 说明: 当使用以前用于创建 Linux 虚拟磁盘的物理磁盘创建虚拟磁盘时,我们将看到在操作系统安装期间存在一些 Linux 分区。 解决方案 当我们创建或删除虚拟磁盘时,仅修改了超级数据块元数据。存储在逻辑 LBA-0 上的虚拟磁盘的分区表未修 改。因此,当我们重新创建虚拟磁盘时,仍会看到之前列出的分区。 ● 在操作系统安装过程中,可以使用操作系统安装程序删除这些分区。 ● 为了不列出分区,如果支持,您可以执行物理磁盘的加密擦除,然后从 HII 创建虚拟磁盘。 注: 执行加密擦除将删除物理磁盘上的所有数据。 重建虚拟磁盘:全局热备盘在 HII 或 iDRAC 中未列为联机 说明: 使用全局热备盘完成虚拟磁盘重建后,磁盘的状态不会列为联机,磁盘的状态将列为就绪。 解决方案 这是预期行为。无需任何操作。 创建虚拟磁盘时不支持小数位的虚拟磁盘大小 可能的原因: 输入磁盘大小的值后,将虚拟磁盘大小的单位从 MB 更改为 GB 或从 GB 更改为 TB 等,会更改磁盘大小的 值。 纠正措施: 建议在指定磁盘大小的值之前,先选择虚拟磁盘大小的单位。
所需物理磁盘不可用 请确认该物理磁盘是否: 1. 为专用热备用,并因其在另一个虚拟磁盘中使用而不可用。 2. 已满或没有足够的可用容量。 系统已达到 30 个虚拟磁盘的最大值 删除未使用的虚拟磁盘。 小心: 删除虚拟磁盘将破坏该虚拟磁盘中的所有数据。 虚拟磁盘处于降级状态 如果虚拟磁盘处于降级状态,请检查以下原因: 1. 已移除物理磁盘。 2. 物理磁盘是否存在物理或机械故障 页面上的 49。 3. 虚拟磁盘已失去冗余。 4. 虚拟磁盘中元数据损坏。 已移除物理磁盘 1. 如果是无意中移除,则可安装原有物理磁盘;或用新的或已用过的物理磁盘进行替换。 2. 初始化新物理磁盘。对所有已更换的物理磁盘执行 Rescan(重新扫描)。 3. 如果没有移除物理磁盘,请检查电缆是否正确安装。 物理磁盘是否存在物理或机械故障 1. 确定虚拟磁盘中是否发生物理磁盘故障。 2. 如果最近移除和更换了物理磁盘,请确定其正确放置在背板中。检查物理磁盘和系统板中的电缆连接。 3.
3. 该物理磁盘已是虚拟磁盘的组成部分。 4. 物理磁盘类型各不相同。 该 RAID 级别不允许创建专用热备用 无法为卷或 RAID 0 虚拟磁盘创建热备用。 指定的物理磁盘无足够容量用于专用热备用 选作专用热备用盘的物理磁盘容量必须等于或大于虚拟磁盘中最小物理磁盘的容量。例如,如果选作专用热备用的物理磁盘为 160GB,虚拟磁盘中物理磁盘为 80 GB、160 GB 和 500 GB,则可以分配专用热备用。这是因为选作专用热备用的物理磁盘大于虚拟 磁盘中的最小 (80 GB) 物理磁盘。 该物理磁盘已是虚拟磁盘的组成部分 无法将专用热备用分配给另一个虚拟磁盘。 物理磁盘类型各不相同 用作专用热备用的物理磁盘必须与已是虚拟磁盘一部分的物理磁盘为相同的类型。例如,如果虚拟磁盘由 SATA-II 物理磁盘组成,则 专用热备用必须为 SATA-II 物理磁盘。 无法创建全局热备用 如果您无法创建全局热备用,请检查以下原因: 1. 没有空物理磁盘可用,或物理磁盘尚未转换为 RAID 功能磁盘 页面上的 50。 2. 该物理磁盘已是虚拟磁盘的组成部分。 3.
指定为全局热备用的物理磁盘丢失 ● 检查该物理磁盘是否已从背板或电缆连接中卸下,或从控制器连接到物理磁盘的电缆是否已断开连接或出现故障。 ● 重新扫描以验证物理磁盘是否仍为丢失状态。 专用热备用发生故障 如果专用热备用发生故障,请检查以下原因: 1. 控制器无法与热备用进行通信。 2. 专用热备用在 BIOS 配置公用程序中没有显示或已脱机 页面上的 51。 控制器无法与热备用进行通信 1. 检查连接控制器与物理磁盘的电缆是否连接正确。 2. 确保该物理磁盘仍被分配为全局或专用热备用。 3. 确定分配为热备用的物理磁盘是否已出现故障。 专用热备用在 BIOS 配置公用程序中没有显示或已脱机 1. 确定物理磁盘是否已移除或发生故障。 2. 检查电缆是否松动或损坏。 故障或降级的虚拟磁盘 从虚拟磁盘中移除一个物理磁盘将导致: 1. 卷或 RAID 0 虚拟磁盘变为 Failed(故障)状态。 2. RAID 1 和 RAID 5 虚拟磁盘变为 Degraded(降级)状态。 3.
无法使用第三方 RAID 配置公用程序在 NVMe PCIe SSD 上配置 RAID 纠正措施 52 确保在 Non RAID(非 RAID)模式中设置 NVMe。请参阅将 NVMe PCIe SSD 设置为 RAID 模式 页面上的 38。 系统故障排除
9 获得帮助 您可以通过联系 Dell 获得 Dell 产品的帮助,或发送关于产品文档的反馈。 主题: • • • • 联系戴尔 找到您的系统服务标签 相关说明文件 说明文件反馈 联系戴尔 戴尔提供了在线和电话支持及服务选项。如果没有活动的互联网连接,您可以在购货发票、装箱单、帐单或戴尔产品目录上查找联 系信息。服务可用性会因国家/地区以及产品而异,某些服务可能在您所在的地区不可用。有关销售、技术支持或客户服务问题,请 联系戴尔: 1. 转至 www.dell.com/support/home。 2. 从页面右下角的下拉菜单中选择您所在的国家/地区。 3. 对于定制的支持: a. 在输入服务编号、序列号、服务请求、型号或关键字字段中输入系统服务编号。 b. 单击提交。 此时将显示其中列出各种支持类别的支持页面。 4. 对于一般支持: a. 选择您的产品类别。 b. 选择您的产品领域。 c. 选择您的产品。 此时将显示其中列出各种支持类别的支持页面。 5. 有关联系戴尔全局技术支持的详细信息: a. 单击 全球技术支持 b.
说明文件反馈 单击任意 Dell EMC 说明文件页面中的 Feedback(反馈)链接,填写表格,然后单击 Submit(提交)以发送您的反馈。 54 获得帮助