Setup Guide

8. Connect the SAS cables to the upper backplane expander board.

Make sure that both SAS connectors are latched.

NOTE: The ends of the SAS cables that are plugged into the upper backplane expander board

have the labels UP EXP SAS A and UP EXP SAS B marked on the cables.

Figure 10. Installing the Upper Backplane Expander Board

1. backplane 2. guide pins on the hard-drive backplane

(2)

3. backplane expander board connectors (3) 4. backplane expander board

5. lower backplane expander board 6. release Lever

7. LOW EXP SAS A 8. UP EXP SAS A

9. UP EXP SAS B 10. SAS slot on backplane expander board

11. LOW EXP SAS B